Price on request
Make an offer| Force | T |
| Stroke length | 10 mm |
| Table length | mm |
| Table width | mm |
| Engine Power | kW |
| ------------------- | |
| Length x width x height | - × 1650.0 × - |
| Weight | kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Danieli 160Ton EAF |
| Last availability date | 02/04/2026 |
This listing features a Danieli 160 Ton Electric Arc Furnace (EAF) combined with a Mitsubishi hot rolling mill designed for strip processing. Manufactured in 2009, the equipment was operational until its shutdown in August 2019 due to management deterioration. The facility has a production capacity of approximately 3.0 million tons per year and is capable of processing various steel grades including AHSS 80, API, SPFS590, and high carbon steel.
The Electric Arc Furnace is an AC Consteel type with two units, each having a 160-ton heat capacity. It is equipped with 140 MVA transformers and 28-inch copper electrode arms. The furnace diameter measures 7,700 mm and includes oxygen, carbon, lime, and combined C/O2 injectors to support the melting process. Complementing the EAF is a twin-station ladle furnace with a 160-ton capacity and a 34 MVA transformer, designed for temperature control and refining.
The continuous caster consists of two vertical curved casters with a 5,000 mm radius, capable of casting slabs sized 70 to 85 mm thick and 900 to 1,650 mm wide. Casting speeds vary between 4.6 and 6.0 meters per minute depending on slab thickness. Additional features include a pendulum-type shear with a maximum capacity of 13,000 KN.
The hot rolling mill is a pair cross-type mill capable of producing strips from 1.2 mm to 16 mm thick and widths between 900 mm and 1,650 mm, with a maximum product weight of 30 tons. The line includes a tunnel furnace fueled by LNG, vertical edger rolls, roughing and finishing mills with automatic gauge control, and a run-out table with laminar flow and spray systems. The skin pass mill is a single-stand 4-high mill designed for strip thicknesses between 1.0 mm and 6.0 mm and widths from 900 mm to 1,630 mm.
The facility is supported by extensive water treatment infrastructure including pumps, filters, and cooling towers, as well as a substation with multiple transformers and generators.
Images show the industrial forging press in operation with glowing hot metal and personnel wearing safety helmets, indicating adherence to safety protocols. The press features large vertical pressing arms consistent with a 160-ton capacity. The overall equipment appears to be in good working condition, though buyers should verify operational status prior to purchase.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Miscellaneous
160Ton EAF + Mitsubishi 1650 mm W Hot Rolling (Strip) Mill -
Electric Arc Furnace and Hot Rolling Mill (Strip)
1) General specification :
Date of operation 2009. 07.01, Shutdown : 08.
2019 Reason for shutdown Management deterioration
Products capacity 3.0 million ton / year.
Steel kind AHSS 80, API, SPFS590, High carbon steel, etc.
2 Facility specification
2.1 Electric Arc Furnace
Type : AC Consteel, EBT ,
Capacity : 160 ton / heat 2units
Transformer : 140 MVA 2units
Electrode arm size : 28 inch Conducive arm : cupper
Furnace dia. : 7.700 mm
Oxygen injector : 2400 Nm3 / hr. x 4 ea
Carbon injector : 50 kg / min. x 2ea
C/O2 injector : 3,700 Nm3 / hr. , 45kg / min. x 1ea
Lime injector : 200 kg / min. x 1ea.
2.2 Laddle Furnace
Type : Twin station, TTT : 46min. / heat,
Capacity : 160 ton / heat
Transformer : 34 MVA
Electrode arm size :18 inch
Temperature rising : 4.5°C / min.
VD-OB : Twin station.
2.3 Continuous Caster
Type : Vertical curved caster, 2 units
Radius : 5,000 mm,
Slab size : 70, 85 mm x 900~1,650 mm,
Casting speed : 70 mm slab : 6.0m/min., 85mm slab : 4.6m/min.
Mould : Length : 1,200 mm,
Strand Segments : 9ea.
Dummy bar : Bottom feeding (T x W x L) 85 x 1335 x 10100 mm,
Ladle turret : 160 ton (max.190 ton),
Tundish : 38 ton (max. 42 ton),
Tundish car : Moving speed : 2m~20 m/min., Lifting speed : 300 m/min.
Oscillator Frequency : 0~450cycle / min. Stoke : 0~10mm
Shear : Pendulum type, Capacity : 13,000 KN max., Knife length : 1,900 mm,
2.4 Hot Rolling Mill
Type : Pair cross type
Product size : 1.2 mmT~16 mm T x 900 mm ~1650 mm x max. 30 ton,
Product capacity : 3.0 million ton / year,
Tunnel Furnace : 505 ton A line: 219.25 m, B line:176.8m, Shuttle ferry type Slab size : 70 mm T / 85, mm T x 900 W mm / 1,650Wmm Fuel : LNG,
Length : A-219.25m, B-176.8m, out put temp.: 1,150°C,
Vertical edger : Roll dia. : 580 mm ~ 640mm,
Roughing mill : 4 high x 2stand, RSB, AGC, Pass linner, Pinion,
Finishing mill : 4 high x 5stand, FSB, AGC, Step liner, Pass liner, Looper Line max. speed : 760m/min.
Run out table : 12 banks, top : laminer flow, bottom : spary
Down coiler : Pinch roll, unit roll, mandrel,
2.4 Skin pass mill
Type : Single stand 4high
Product capacity : 1.2million ton
Mill specification : Strip thickness : 1.0 mm ~ 6.0 mm Strip width : 900 mm~1,630 mm Line speed : 1.0 mm - 500 m/min., 6.0 mm - 255 m/min.
Coil dia. : Inn : 762mm, out : 1000 mm ~ 2,100mm, weight : 5,000 kg ~ 30,000 kg,
Roll shop : Buck up roll grinder : 1 unit, Work roll grinder : 3 unit,
2.5 Water treatment facility
Pump : 228 unit
Filter : 46 unit
Cooling tower : 13 sets
2.6 Substation
Transformer : 154 KV / 3,3 K, 220 MVA 2 unit, 200 MVA 1 unit
Generator : 6,6 KV / 2,500 KVA 2 unit
This mill is included Electric Arc Furnac ( 160ton)
This mill is on foundation in works
Item Condition: Good working condition
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 19, 2026 |
Miscellaneous
160Ton EAF + Mitsubishi 1650 mm W Hot Rolling (Strip) Mill -
Electric Arc Furnace and Hot Rolling Mill (Strip)
1) General specification :
Date of operation 2009. 07.01, Shutdown : 08.
2019 Reason for shutdown Management deterioration
Products capacity 3.0 million ton / year.
Steel kind AHSS 80, API, SPFS590, High carbon steel, etc.
2 Facility specification
2.1 Electric Arc Furnace
Type : AC Consteel, EBT ,
Capacity : 160 ton / heat 2units
Transformer : 140 MVA 2units
Electrode arm size : 28 inch Conducive arm : cupper
Furnace dia. : 7.700 mm
Oxygen injector : 2400 Nm3 / hr. x 4 ea
Carbon injector : 50 kg / min. x 2ea
C/O2 injector : 3,700 Nm3 / hr. , 45kg / min. x 1ea
Lime injector : 200 kg / min. x 1ea.
2.2 Laddle Furnace
Type : Twin station, TTT : 46min. / heat,
Capacity : 160 ton / heat
Transformer : 34 MVA
Electrode arm size :18 inch
Temperature rising : 4.5°C / min.
VD-OB : Twin station.
2.3 Continuous Caster
Type : Vertical curved caster, 2 units
Radius : 5,000 mm,
Slab size : 70, 85 mm x 900~1,650 mm,
Casting speed : 70 mm slab : 6.0m/min., 85mm slab : 4.6m/min.
Mould : Length : 1,200 mm,
Strand Segments : 9ea.
Dummy bar : Bottom feeding (T x W x L) 85 x 1335 x 10100 mm,
Ladle turret : 160 ton (max.190 ton),
Tundish : 38 ton (max. 42 ton),
Tundish car : Moving speed : 2m~20 m/min., Lifting speed : 300 m/min.
Oscillator Frequency : 0~450cycle / min. Stoke : 0~10mm
Shear : Pendulum type, Capacity : 13,000 KN max., Knife length : 1,900 mm,
2.4 Hot Rolling Mill
Type : Pair cross type
Product size : 1.2 mmT~16 mm T x 900 mm ~1650 mm x max. 30 ton,
Product capacity : 3.0 million ton / year,
Tunnel Furnace : 505 ton A line: 219.25 m, B line:176.8m, Shuttle ferry type Slab size : 70 mm T / 85, mm T x 900 W mm / 1,650Wmm Fuel : LNG,
Length : A-219.25m, B-176.8m, out put temp.: 1,150°C,
Vertical edger : Roll dia. : 580 mm ~ 640mm,
Roughing mill : 4 high x 2stand, RSB, AGC, Pass linner, Pinion,
Finishing mill : 4 high x 5stand, FSB, AGC, Step liner, Pass liner, Looper Line max. speed : 760m/min.
Run out table : 12 banks, top : laminer flow, bottom : spary
Down coiler : Pinch roll, unit roll, mandrel,
2.4 Skin pass mill
Type : Single stand 4high
Product capacity : 1.2million ton
Mill specification : Strip thickness : 1.0 mm ~ 6.0 mm Strip width : 900 mm~1,630 mm Line speed : 1.0 mm - 500 m/min., 6.0 mm - 255 m/min.
Coil dia. : Inn : 762mm, out : 1000 mm ~ 2,100mm, weight : 5,000 kg ~ 30,000 kg,
Roll shop : Buck up roll grinder : 1 unit, Work roll grinder : 3 unit,
2.5 Water treatment facility
Pump : 228 unit
Filter : 46 unit
Cooling tower : 13 sets
2.6 Substation
Transformer : 154 KV / 3,3 K, 220 MVA 2 unit, 200 MVA 1 unit
Generator : 6,6 KV / 2,500 KVA 2 unit
This mill is included Electric Arc Furnac ( 160ton)
This mill is on foundation in works
Item Condition: Good working condition
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Force | T |
| Stroke length | 10 mm |
| Table length | mm |
| Table width | mm |
| Engine Power | kW |
| ------------------- | |
| Length x width x height | - × 1650.0 × - |
| Weight | kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Danieli 160Ton EAF |
| Last availability date | 02/04/2026 |
This listing features a Danieli 160 Ton Electric Arc Furnace (EAF) combined with a Mitsubishi hot rolling mill designed for strip processing. Manufactured in 2009, the equipment was operational until its shutdown in August 2019 due to management deterioration. The facility has a production capacity of approximately 3.0 million tons per year and is capable of processing various steel grades including AHSS 80, API, SPFS590, and high carbon steel.
The Electric Arc Furnace is an AC Consteel type with two units, each having a 160-ton heat capacity. It is equipped with 140 MVA transformers and 28-inch copper electrode arms. The furnace diameter measures 7,700 mm and includes oxygen, carbon, lime, and combined C/O2 injectors to support the melting process. Complementing the EAF is a twin-station ladle furnace with a 160-ton capacity and a 34 MVA transformer, designed for temperature control and refining.
The continuous caster consists of two vertical curved casters with a 5,000 mm radius, capable of casting slabs sized 70 to 85 mm thick and 900 to 1,650 mm wide. Casting speeds vary between 4.6 and 6.0 meters per minute depending on slab thickness. Additional features include a pendulum-type shear with a maximum capacity of 13,000 KN.
The hot rolling mill is a pair cross-type mill capable of producing strips from 1.2 mm to 16 mm thick and widths between 900 mm and 1,650 mm, with a maximum product weight of 30 tons. The line includes a tunnel furnace fueled by LNG, vertical edger rolls, roughing and finishing mills with automatic gauge control, and a run-out table with laminar flow and spray systems. The skin pass mill is a single-stand 4-high mill designed for strip thicknesses between 1.0 mm and 6.0 mm and widths from 900 mm to 1,630 mm.
The facility is supported by extensive water treatment infrastructure including pumps, filters, and cooling towers, as well as a substation with multiple transformers and generators.
Images show the industrial forging press in operation with glowing hot metal and personnel wearing safety helmets, indicating adherence to safety protocols. The press features large vertical pressing arms consistent with a 160-ton capacity. The overall equipment appears to be in good working condition, though buyers should verify operational status prior to purchase.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 19, 2026 |
Преса Danieli 160Ton EAF
Lis Danieli 160Ton EAF
Danieli 160Ton EAF Presse
Danieli 160Ton EAF Presse
Πρέσα Danieli 160Ton EAF
Danieli 160Ton EAF Press
Prensa Danieli 160Ton EAF
Presse Danieli 160Ton EAF
Preša Danieli 160Ton EAF
Danieli 160Ton EAF Prés
Pressa Danieli 160Ton EAF
Danieli 160Ton EAF Presas
Danieli 160Ton EAF Pers
Prasa Danieli 160Ton EAF
Prensa Danieli 160Ton EAF
Prese Danieli 160Ton EAF
Danieli 160Ton EAF Пресс
Presa Danieli 160Ton EAF
Danieli 160Ton EAF Press
Pres Danieli 160Ton EAF
EN
- Languages
English (GB)