Price on request
Make an offer| ------------------- | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 05/11/2025 |
This listing is for a Dake hydraulic press, model 27-772, designed as a down-acting press. The nominal bed size measures 48 inches by 38 inches, with a frame width between posts of 24 inches and an overall length of 61 inches. The clamp cylinder features an 8-inch bore with a 6-inch diameter rod and a maximum stroke of 15 inches, while the maximum daylight opening is approximately 35 inches. The press is fully guided on 4.5-inch diameter posts with 30-inch bushings, ensuring precise ram alignment during operation. Operator height is approximately 40 inches.
The machine includes two air-operated safety locks located on the left and right sides of the opening for enhanced safety during use. The control system is built around an Allen-Bradley SLC500 PLC with a Panel View 550 human-machine interface, and it features a palm pedestal for operator convenience. Adjustable limit switches allow for fine-tuning of ram travel.
Hydraulics are top-mounted, powered by a 20 HP motor compatible with 230-460 volts at 1800 RPM. The hydraulic pumps consist of a Dynex PF2006-1807 pump rated at 6000 PSI and 4.6 GPM, along with a Vickers 35V25A-1C10-130 pump providing 38.8 GPM. The system includes a 90-gallon reservoir.
Operating speeds include approximately 170 inches per minute for fast close, 17 inches per minute for pressing, 38 inches per minute for break away, and 390 inches per minute for fast open. The press delivers a break away force of 65 tons. Overall dimensions are 80 inches by 66 inches (42 inches without overhang) by 176 inches in height, with an approximate weight of 18,000 pounds.
The machine is equipped with two vertical guide rods supporting the press ram and a control panel mounted on a stand to the right side, featuring visible buttons and switches for operation. A safety guard or protective barrier is installed on the left side of the machine. The press shows some signs of rust and wear, particularly near the base and lower parts, which may be relevant for maintenance considerations.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Features
Model 27-772 - Down Acting
- LR Overall is 61" FB betwwen posts is 24"
- Nominal bed size: 48" x 38"
- Clamp cylinder is 8" bore w/6" dia. rod and 15"
max stroke.
- Max. daylight is approx. 35"
- Fully guided on 4.5" dia. posts w/30" bushings
- Operator height is approx. 40"
- 2) Air operated safety locks on left and right
of opening
- Control system built around an Allen-Bradley
SLC500 PLC Panel View 550 HMI
- Palm pedestal
- Adjustable limit switches
- Top mounted hydraulic system
- 20 HP motor (230-460 volt; 1800 RPM)
- Dynex PF2006-1807 pump (6000 PSI; 4.6 GPM)
- Vickers 35V25A-1C10-130 Pump (38.8 GPM)
- 90 gal. reservoir
- Approx. speeds: 170 IPM Fast close
17 IPM Pressing
38 IPM Break away
390 IPM Fast open
- 65 ton break away force
Overall dimensions: 80" x 66" (42" w/o overhang)
x 176" H
Approx. weight: 18,000 lbs.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2011 |
| Offers online | 196 |
| Last activity | April 1, 2026 |
Features
Model 27-772 - Down Acting
- LR Overall is 61" FB betwwen posts is 24"
- Nominal bed size: 48" x 38"
- Clamp cylinder is 8" bore w/6" dia. rod and 15"
max stroke.
- Max. daylight is approx. 35"
- Fully guided on 4.5" dia. posts w/30" bushings
- Operator height is approx. 40"
- 2) Air operated safety locks on left and right
of opening
- Control system built around an Allen-Bradley
SLC500 PLC Panel View 550 HMI
- Palm pedestal
- Adjustable limit switches
- Top mounted hydraulic system
- 20 HP motor (230-460 volt; 1800 RPM)
- Dynex PF2006-1807 pump (6000 PSI; 4.6 GPM)
- Vickers 35V25A-1C10-130 Pump (38.8 GPM)
- 90 gal. reservoir
- Approx. speeds: 170 IPM Fast close
17 IPM Pressing
38 IPM Break away
390 IPM Fast open
- 65 ton break away force
Overall dimensions: 80" x 66" (42" w/o overhang)
x 176" H
Approx. weight: 18,000 lbs.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| ------------------- | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 05/11/2025 |
This listing is for a Dake hydraulic press, model 27-772, designed as a down-acting press. The nominal bed size measures 48 inches by 38 inches, with a frame width between posts of 24 inches and an overall length of 61 inches. The clamp cylinder features an 8-inch bore with a 6-inch diameter rod and a maximum stroke of 15 inches, while the maximum daylight opening is approximately 35 inches. The press is fully guided on 4.5-inch diameter posts with 30-inch bushings, ensuring precise ram alignment during operation. Operator height is approximately 40 inches.
The machine includes two air-operated safety locks located on the left and right sides of the opening for enhanced safety during use. The control system is built around an Allen-Bradley SLC500 PLC with a Panel View 550 human-machine interface, and it features a palm pedestal for operator convenience. Adjustable limit switches allow for fine-tuning of ram travel.
Hydraulics are top-mounted, powered by a 20 HP motor compatible with 230-460 volts at 1800 RPM. The hydraulic pumps consist of a Dynex PF2006-1807 pump rated at 6000 PSI and 4.6 GPM, along with a Vickers 35V25A-1C10-130 pump providing 38.8 GPM. The system includes a 90-gallon reservoir.
Operating speeds include approximately 170 inches per minute for fast close, 17 inches per minute for pressing, 38 inches per minute for break away, and 390 inches per minute for fast open. The press delivers a break away force of 65 tons. Overall dimensions are 80 inches by 66 inches (42 inches without overhang) by 176 inches in height, with an approximate weight of 18,000 pounds.
The machine is equipped with two vertical guide rods supporting the press ram and a control panel mounted on a stand to the right side, featuring visible buttons and switches for operation. A safety guard or protective barrier is installed on the left side of the machine. The press shows some signs of rust and wear, particularly near the base and lower parts, which may be relevant for maintenance considerations.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2011 |
| Offers online | 196 |
| Last activity | April 1, 2026 |
Хидравлична преса Dake 27-772
Hydraulický lis Dake 27-772
Dake 27-772 Hydraulisk presse
Dake 27-772 Hydraulikpresse
Υδραυλική πίεση Dake 27-772
Dake 27-772 Hydraulic press
Prensa hidráulica Dake 27-772
Presse hydraulique Dake 27-772
Hidraulična preša Dake 27-772
Dake 27-772 Hidraulikus nyomás
Pressa idraulica Dake 27-772
Hidraulinis presas Dake 27-772
Dake 27-772 Hydraulische pers
Prasa hydrauliczna Dake 27-772
Pressão hidráulica Dake 27-772
Presa hidraulica Dake 27-772
Dake 27-772 Гидравлический пресс
Hidraulična presa Dake 27-772
Dake 27-772 Hydraulisk press
Hidrolik Pres Dake 27-772
EN
- Languages
English (GB)