CYPRESS CW-7 Rotating welding head

Manufacturer CYPRESS
Model CW-7
Location France FR
Category Welding machines
Product id P210212123


Contact the seller

You have the same machine to sell?

Add it to our catalogue for FREE

Start selling

About this seller

Client type User – small or medium company
Active since 2019
Offers online 1
Last activity March 11, 2021


Worked hours
Hours under power
State excellent
At local norms ---------
Status under power


Rotating welding head
Powder Flux Welding Machine
Manufacturer: CYPRESS
Model: CW 7 latest generation,

Used machine but new condition,

Machine equipped with two electric slides, one vertical, one horizontal, with joystick control instead of manually adjustable slides. With these electric slides, the torch position corrections during welding and in particular during pass changes are done without jerking, which considerably facilitates the operator's work. This machine allows the welding of tubes or nozzles of 100 to 1000 mm in diameter, as is, perpendicular to the ferrules, to domed ends as well as to flat sheets.

On a ferrule, the welding lance goes up and down 4 times in one turn and perfectly follows the intersection of the tapping without operator intervention. The machine has rotating contacts which prevent cable twisting. Welding can thus be carried out in a single pass on small thicknesses but above all in multi-pass on larger thicknesses without interruption or resumption.

This machine is simply focused on stitching as well by:
- a stepped centralizer
- an external jaw lathe chuck
- a Cypress CWO centering device with central screw expansion and three contacts
- a specific centering device machined to the inside diameter of your nozzle
- a simple sheet fixed and centered on the stitching

Complete CYPRESS CW 7 welding machine with Miller source including:

A CYPRESS CW 7 head equipped with:
- a LINCOLN wire feeder for welding solid powder flux wires with a diameter of 1.2 to 2.4 mm, or cored wires with a diameter of 1.2 to 3.2 mm
- a 27 kg spool support
- a flow hopper
- an optical cross or a laser spot for joint tracking. (a choice)

CYPRESS head / current source connecting harness, length 15 m

Source MILLER Dimension 812
Ref: 907 289 - 01 - 2

Power supply: 230/400/440 Volt 50/60 HZ,
4 wheel trolley
Multi-process CV / CC current source

650 Amp at 44 volts at 100% duty cycle
815 Amps at 44 volts at 60% duty cycle
Easy to read digital voltage and current display

This source delivers an extremely stable current at the lowest parameters and withstands 700 Amp welding under 34 volts at 100% duty cycle ...

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

How does Exapro work?

Using Exapro is super easy, here is how it works

Here is a selection of similar machines

Contact the seller