Sorry, this offer is no longer available on Exapro

Costa Levigatrici K757 CC / CCC 1.350 Sanding machine for wood

Here is a selection of similar machines

1 Caliper brand COSTA LEVIGATRICI, S.P.A. Bottom / Top 1300 mm. width
Model K757 CC / CCC 1.350 with two groups below and three above, all rubber rollers as follows:
1.-Down roller rubber 90 Sh. hardness with 22 kW motor
2.-Down roller rubber 70 Sh. hardness with kW 15 motor
1.-Up roller rubber 90 Sh. hardness with 22 kW motor
2.-Up roller rubber 70 Sh. hardness with kW 15 motor
3.-Up roller rubber 50 Sh. hardness with kW 15 motor

Insert abrasive strips on the right side in the forward direction.
Vacuum system to maintain the tension of the conveyor belt

Year of manufacture 1998
CE Standards

Are included :
1 Input roller track
1 Track of rollers exit
2 Branches aspiration of 3 outputs
1 Bifurcation suction of 4 outputs
1 Bifurcation aspiration of 5 outputs
Attached photos

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Working width 1350 mm
Type Bottom+Top
Nbr of units 5
Total installed power 22 kW
-------------------
Worked hours
Hours under power
State good
At local norms yes
Status
ALZADO.pdf Download
DATOS CONSUMOS .pdf Download
PLANTA.pdf Download
Client type Reseller
Active since 2020
Offers online 24
Last activity March 29, 2024

Description

1 Caliper brand COSTA LEVIGATRICI, S.P.A. Bottom / Top 1300 mm. width
Model K757 CC / CCC 1.350 with two groups below and three above, all rubber rollers as follows:
1.-Down roller rubber 90 Sh. hardness with 22 kW motor
2.-Down roller rubber 70 Sh. hardness with kW 15 motor
1.-Up roller rubber 90 Sh. hardness with 22 kW motor
2.-Up roller rubber 70 Sh. hardness with kW 15 motor
3.-Up roller rubber 50 Sh. hardness with kW 15 motor

Insert abrasive strips on the right side in the forward direction.
Vacuum system to maintain the tension of the conveyor belt

Year of manufacture 1998
CE Standards

Are included :
1 Input roller track
1 Track of rollers exit
2 Branches aspiration of 3 outputs
1 Bifurcation suction of 4 outputs
1 Bifurcation aspiration of 5 outputs
Attached photos

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Working width 1350 mm
Type Bottom+Top
Nbr of units 5
Total installed power 22 kW
-------------------
Worked hours
Hours under power
State good
At local norms yes
Status

About this seller

Client type Reseller
Active since 2020
Offers online 24
Last activity March 29, 2024