The COMAU 1GXL TWIN horizontal milling center was manufactured in 2001 by the Italian company Comau S.p.A. The use of the milling center is to machine the lower cylinder head. The milling machine consists of two modules mounted opposite each other, equipped with rotary tables and a movable head.

The milling rotary table is mounted on the front of each module and has a tool for clamping workpieces during machining. On the casing, however, a movable head is mounted, which mills, drills holes or smoothes the detail. The machining center HSK 63 tool taper electrospindle is attached to the headstock that slides vertically along the column housing to form the Y axis.

The 16,000 rpm spindle is equipped with a tool unlocking / locking system. The rotary magazine of the COMAU 1GXL TWIN machine holds 23 tools, with a maximum weight of 4 kg, a length of 270 mm and a diameter of 170 mm. The machining center modules have a number of installations, i.e. hydraulic system, TRABON lubrication system, pneumatic system and cooling system.

The milling center is controlled by the SIEMENS Sinumerik 840D CNC controller. The maximum feeds in the X / Y / Z axes are 630 mm, while the accelerated feeds are 10 m / sec2. The total weight of the machining center is 29,200 kg.

COMAU 1GXL TWIN machining center specification
CNC control: SIEMENS Sinumerik 840D
feeds in the X / Y / Z axes: 630/630/630 mm
accelerated feeds in the X / Y / Z axes: 10 m / sec 2
X / Y / Z axis working speed: 1/1 / 0.67 m / s
cycle time: 140.4 sec.
production: 25.6 pcs / hour
spindle speed: 16,000 rpm
tool holder: HSK 63
tool magazine capacity: 23 tools
maximum diameter of tools: 170 mm
maximum tool length: 270 mm
maximum weight of tools: 4 kg
maximum power consumption: 1370 A.
maximum installed power: 720 kW
power supply: 380 V +/- 10% 50 Hz
cooling power of the electro-spindle cooling system: 2800 W
dimensions (L x W x H): 6100 x 2480 x 2350 mm
total weight: 29,200 kg

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Axis X 630 mm
Axis Y 630 mm
Axis Z 630 mm
Rotary table (4th axis) no
CNC SIEMENS Sinumerik 840D
Number of tool pockets 23
Spindle taper HSK 63
Max. spindle speed 16000 rpm
-------------------
Length x width x height 6100.0 × 2480.0 × 2350.0
Weight 29200 kg
Worked hours
Hours under power
State good
At local norms ---------
Status
Client type Reseller
Active since 2010
Offers online 385
Last activity April 13, 2024

Description

The COMAU 1GXL TWIN horizontal milling center was manufactured in 2001 by the Italian company Comau S.p.A. The use of the milling center is to machine the lower cylinder head. The milling machine consists of two modules mounted opposite each other, equipped with rotary tables and a movable head.

The milling rotary table is mounted on the front of each module and has a tool for clamping workpieces during machining. On the casing, however, a movable head is mounted, which mills, drills holes or smoothes the detail. The machining center HSK 63 tool taper electrospindle is attached to the headstock that slides vertically along the column housing to form the Y axis.

The 16,000 rpm spindle is equipped with a tool unlocking / locking system. The rotary magazine of the COMAU 1GXL TWIN machine holds 23 tools, with a maximum weight of 4 kg, a length of 270 mm and a diameter of 170 mm. The machining center modules have a number of installations, i.e. hydraulic system, TRABON lubrication system, pneumatic system and cooling system.

The milling center is controlled by the SIEMENS Sinumerik 840D CNC controller. The maximum feeds in the X / Y / Z axes are 630 mm, while the accelerated feeds are 10 m / sec2. The total weight of the machining center is 29,200 kg.

COMAU 1GXL TWIN machining center specification
CNC control: SIEMENS Sinumerik 840D
feeds in the X / Y / Z axes: 630/630/630 mm
accelerated feeds in the X / Y / Z axes: 10 m / sec 2
X / Y / Z axis working speed: 1/1 / 0.67 m / s
cycle time: 140.4 sec.
production: 25.6 pcs / hour
spindle speed: 16,000 rpm
tool holder: HSK 63
tool magazine capacity: 23 tools
maximum diameter of tools: 170 mm
maximum tool length: 270 mm
maximum weight of tools: 4 kg
maximum power consumption: 1370 A.
maximum installed power: 720 kW
power supply: 380 V +/- 10% 50 Hz
cooling power of the electro-spindle cooling system: 2800 W
dimensions (L x W x H): 6100 x 2480 x 2350 mm
total weight: 29,200 kg

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Axis X 630 mm
Axis Y 630 mm
Axis Z 630 mm
Rotary table (4th axis) no
CNC SIEMENS Sinumerik 840D
Number of tool pockets 23
Spindle taper HSK 63
Max. spindle speed 16000 rpm
-------------------
Length x width x height 6100.0 × 2480.0 × 2350.0
Weight 29200 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2010
Offers online 385
Last activity April 13, 2024

Here is a selection of similar machines

Comau 1GXL TWIN Machining center - horizontal