The COMAU 1GXL TWIN horizontal milling center was built in 2003 by the Italian company Comau S.p.A. The machine consists of two opposing machining centers for machining the lower cylinder head. The milling machines are equipped with a number of power installations and a movable head used for milling, drilling and smoothing, and the whole is controlled by a SIEMENS Sinumerik 840D CNC controller. Loading and unloading of the detail is done automatically with the help of the portal. The rotary table is mounted on the central housing and has a device for clamping details during machining. The tool magazine holds 23 tools, 270 mm long, 170 mm in diameter and weighing 4 kg. The feeds in the X / Y / Z axes are 630 mm, while the accelerated feeds are 10 m / sec2. The machining center spindle runs at a speed of 16,000 rpm and has an HSK 63 tool holder. The COMAU 1GXL TWIN machine weighs 29,200 kg.

Technical data of the COMAU 1GXL TWIN milling machine
- CNC control: SIEMENS Sinumerik 840D
- feeds in the X / Y / Z axes: 630/630/630 mm
- accelerated feeds in the X / Y / Z axes: 10 m / sec2
- working speed of the X / Y / Z axis: 1/1 / 0.67 m / s
- cycle time: 140.4 sec.
- production: 25.6 pcs / hour
- spindle speed: 16,000 rpm
- tool holder: HSK 63
- tool magazine capacity: 23 tools
- maximum diameter of tools: 170 mm
- maximum tool length: 270 mm
- maximum weight of tools: 4 kg
- maximum power consumption: 1370 A.
- maximum installed power: 720 kW
- electric power supply: 380 V +/- 10% 50 Hz
- cooling power of the electro-spindle cooling system: 2800 W
- dimensions (length x width x height): 6100 x 2480 x 2350 mm
- 1GXL TWIN machining center weight: 29,200 kg

COMAU 1GXL TWIN machining center tool magazine
The tool magazine consists of a rotary disk with 23 tool holders. It is mounted on the top left side of the module. The tool change procedure is automatic and handled by the control unit, while the loading and unloading of the tools in the magazine is done manually by the operator using a special device. 23 lever jaws for tools with HSK 63 holder according to DIN 69893 are mounted on the magazine's rotary disk. The magazine disk is positioned vertically and is started by a Brushless motor, located in the rear part of the magazine, connected directly to the reducer. The proximity microswitch signals the control unit that the tool is in the jaws in the loading position. The spindle head puts the tool installed in the head into the magazine in the right place and takes a new tool from the magazine. Before placing the tool in the magazine, the spindle head goes through a tool integrity check. The tool integrity control device has a proximity microswitch, actuated by a pneumatic actuator, located near the controlled tool.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Axis X 630 mm
Axis Y 630 mm
Axis Z 630 mm
Rotary table (4th axis) no
CNC SIEMENS Sinumerik 840D
Number of tool pockets 23
Spindle taper HSK 63
Max. spindle speed 16000 rpm
-------------------
Length x width x height 6100.0 × 2480.0 × 2350.0
Weight 29200 kg
Worked hours
Hours under power
State good
At local norms ---------
Status
Client type Reseller
Active since 2010
Offers online 385
Last activity April 13, 2024

Description

The COMAU 1GXL TWIN horizontal milling center was built in 2003 by the Italian company Comau S.p.A. The machine consists of two opposing machining centers for machining the lower cylinder head. The milling machines are equipped with a number of power installations and a movable head used for milling, drilling and smoothing, and the whole is controlled by a SIEMENS Sinumerik 840D CNC controller. Loading and unloading of the detail is done automatically with the help of the portal. The rotary table is mounted on the central housing and has a device for clamping details during machining. The tool magazine holds 23 tools, 270 mm long, 170 mm in diameter and weighing 4 kg. The feeds in the X / Y / Z axes are 630 mm, while the accelerated feeds are 10 m / sec2. The machining center spindle runs at a speed of 16,000 rpm and has an HSK 63 tool holder. The COMAU 1GXL TWIN machine weighs 29,200 kg.

Technical data of the COMAU 1GXL TWIN milling machine
- CNC control: SIEMENS Sinumerik 840D
- feeds in the X / Y / Z axes: 630/630/630 mm
- accelerated feeds in the X / Y / Z axes: 10 m / sec2
- working speed of the X / Y / Z axis: 1/1 / 0.67 m / s
- cycle time: 140.4 sec.
- production: 25.6 pcs / hour
- spindle speed: 16,000 rpm
- tool holder: HSK 63
- tool magazine capacity: 23 tools
- maximum diameter of tools: 170 mm
- maximum tool length: 270 mm
- maximum weight of tools: 4 kg
- maximum power consumption: 1370 A.
- maximum installed power: 720 kW
- electric power supply: 380 V +/- 10% 50 Hz
- cooling power of the electro-spindle cooling system: 2800 W
- dimensions (length x width x height): 6100 x 2480 x 2350 mm
- 1GXL TWIN machining center weight: 29,200 kg

COMAU 1GXL TWIN machining center tool magazine
The tool magazine consists of a rotary disk with 23 tool holders. It is mounted on the top left side of the module. The tool change procedure is automatic and handled by the control unit, while the loading and unloading of the tools in the magazine is done manually by the operator using a special device. 23 lever jaws for tools with HSK 63 holder according to DIN 69893 are mounted on the magazine's rotary disk. The magazine disk is positioned vertically and is started by a Brushless motor, located in the rear part of the magazine, connected directly to the reducer. The proximity microswitch signals the control unit that the tool is in the jaws in the loading position. The spindle head puts the tool installed in the head into the magazine in the right place and takes a new tool from the magazine. Before placing the tool in the magazine, the spindle head goes through a tool integrity check. The tool integrity control device has a proximity microswitch, actuated by a pneumatic actuator, located near the controlled tool.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Axis X 630 mm
Axis Y 630 mm
Axis Z 630 mm
Rotary table (4th axis) no
CNC SIEMENS Sinumerik 840D
Number of tool pockets 23
Spindle taper HSK 63
Max. spindle speed 16000 rpm
-------------------
Length x width x height 6100.0 × 2480.0 × 2350.0
Weight 29200 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2010
Offers online 385
Last activity April 13, 2024

Here is a selection of similar machines

Comau 1GXL TWIN Machining center - horizontal