The COMAU 1GXL TWIN horizontal machining center was manufactured by Comau S.p.A. in 2003 in Italy. The lower cylinder head processing machine consists of two opposing machining centers. Each of the machine modules has a movable head for milling, drilling and smoothing, and a number of power installations such as: hydraulic system, TRABON lubrication system, air-oil lubrication system, pneumatic system and cooling system.
Everything is controlled by the SIEMENS Sinumerik 840D CNC controller. The machine portal enables automatic loading and unloading of the workpiece to the milling machine. At the front of each module there is a rotary table with a device for clamping details during machining. The milling machine is equipped with a tool magazine for 23 tools weighing 4 kg, 270 mm long and 170 mm in diameter. The machine works in three axes X / Y / Z with feeds amounting to 630 mm. The machine spindle rotates at a speed of 16,000 rpm and is equipped with an HSK 63 tool holder. The total weight of the COMAU 1GXL TWIN machining center is 29,200 kg.

Technical specification of the COMAU 1GXL TWIN machining center
- CNC control: SIEMENS Sinumerik 840D
- feeds in the X / Y / Z axes: 630/630/630 mm
- accelerated feeds in the X / Y / Z axes: 10 m / sec2
- working speed of the X / Y / Z axis: 1/1 / 0.67 m / s
- cycle time: 140.4 sec.
- production: 25.6 pcs / hour
- spindle speed: 16000 rpm
- tool holder: HSK 63
- tool magazine capacity: 23 tools
- maximum diameter of tools: 170 mm
- maximum tool length: 270 mm
- maximum weight of tools: 4 kg
- maximum power consumption: 1370 A.
- maximum installed power: 720 kW
- electric power supply: 380 V +/- 10% 50 Hz
- cooling power of the electro-spindle cooling system: 2800 W
- dimensions (length x width x height): 6100 x 2480 x 2350 mm
- weight of the 1GXL TWIN milling machine: 29,200 kg

COMAU 1GXL TWIN milling machine rotary table
The rotary table, on which the plate with the processing device was mounted, is at the front of the module; TWIN configuration has two turntables, one for each module, mounted side by side on the same housing. Its rotational movement forms the B axis of the machining center. The table is driven by a Brushless motor through the kinematic movement of the worm screw - gear wheel and is held on a large-dimension transverse-thrust bearing. The reading of the angle value is performed by a rotary encoder located inside the rotary table.
The COMAU 1GXL TWIN center table has a hydraulic brake, consisting of a chamber which, after receiving the hydraulic oil, creates pressure on the brake disc, connected to the plate holding the processing jig. The turntable is mounted on a plate with a processing device, where there is a device with 6 channels, connected to the DEUBLIN manifold, which supplies energy necessary for the operation of the processing device and serves to lock / unlock the turntable brake.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Axis X 630 mm
Axis Y 630 mm
Axis Z 630 mm
Rotary table (4th axis) no
CNC SIEMENS Sinumerik 840D
Number of tool pockets 23
Spindle taper HSK 63
Max. spindle speed 16000 rpm
-------------------
Length x width x height 6100.0 × 2480.0 × 2350.0
Weight 29200 kg
Worked hours
Hours under power
State good
At local norms ---------
Status
Client type Reseller
Active since 2010
Offers online 385
Last activity April 13, 2024

Description

The COMAU 1GXL TWIN horizontal machining center was manufactured by Comau S.p.A. in 2003 in Italy. The lower cylinder head processing machine consists of two opposing machining centers. Each of the machine modules has a movable head for milling, drilling and smoothing, and a number of power installations such as: hydraulic system, TRABON lubrication system, air-oil lubrication system, pneumatic system and cooling system.
Everything is controlled by the SIEMENS Sinumerik 840D CNC controller. The machine portal enables automatic loading and unloading of the workpiece to the milling machine. At the front of each module there is a rotary table with a device for clamping details during machining. The milling machine is equipped with a tool magazine for 23 tools weighing 4 kg, 270 mm long and 170 mm in diameter. The machine works in three axes X / Y / Z with feeds amounting to 630 mm. The machine spindle rotates at a speed of 16,000 rpm and is equipped with an HSK 63 tool holder. The total weight of the COMAU 1GXL TWIN machining center is 29,200 kg.

Technical specification of the COMAU 1GXL TWIN machining center
- CNC control: SIEMENS Sinumerik 840D
- feeds in the X / Y / Z axes: 630/630/630 mm
- accelerated feeds in the X / Y / Z axes: 10 m / sec2
- working speed of the X / Y / Z axis: 1/1 / 0.67 m / s
- cycle time: 140.4 sec.
- production: 25.6 pcs / hour
- spindle speed: 16000 rpm
- tool holder: HSK 63
- tool magazine capacity: 23 tools
- maximum diameter of tools: 170 mm
- maximum tool length: 270 mm
- maximum weight of tools: 4 kg
- maximum power consumption: 1370 A.
- maximum installed power: 720 kW
- electric power supply: 380 V +/- 10% 50 Hz
- cooling power of the electro-spindle cooling system: 2800 W
- dimensions (length x width x height): 6100 x 2480 x 2350 mm
- weight of the 1GXL TWIN milling machine: 29,200 kg

COMAU 1GXL TWIN milling machine rotary table
The rotary table, on which the plate with the processing device was mounted, is at the front of the module; TWIN configuration has two turntables, one for each module, mounted side by side on the same housing. Its rotational movement forms the B axis of the machining center. The table is driven by a Brushless motor through the kinematic movement of the worm screw - gear wheel and is held on a large-dimension transverse-thrust bearing. The reading of the angle value is performed by a rotary encoder located inside the rotary table.
The COMAU 1GXL TWIN center table has a hydraulic brake, consisting of a chamber which, after receiving the hydraulic oil, creates pressure on the brake disc, connected to the plate holding the processing jig. The turntable is mounted on a plate with a processing device, where there is a device with 6 channels, connected to the DEUBLIN manifold, which supplies energy necessary for the operation of the processing device and serves to lock / unlock the turntable brake.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Axis X 630 mm
Axis Y 630 mm
Axis Z 630 mm
Rotary table (4th axis) no
CNC SIEMENS Sinumerik 840D
Number of tool pockets 23
Spindle taper HSK 63
Max. spindle speed 16000 rpm
-------------------
Length x width x height 6100.0 × 2480.0 × 2350.0
Weight 29200 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2010
Offers online 385
Last activity April 13, 2024

Here is a selection of similar machines

Comau 1GXL TWIN Machining center - horizontal