Sorry, this offer is no longer available on Exapro

Comafer DINAMIC 70 N Briquetting machine

Here is a selection of similar machines

Briquetadora Cofamer Dinamic 70 N Ocasion

TECHNICAL CHARACTERISTICS.
- Fully oleodynamic machine without electrical parts except for the electrical panel
      for starting the engine.
- Production 30/70 KG / H.
- Pump motor (HP 7.5)
- Briquette O 55 MM
- Electric control panel.
- Special conical ferrule to prevent material bridges (base O 1000 to O 900).
- Number 7 cycles / min.
- Pushing power approx. 700 Kg / cm2.
- Number 3 cylinders.
- Number 1 round automatic centering jaw in a monoblock strapless indestructible.
- Briquette cylinder O 120 mm.
- Briquette length max. 50 mm
- Timed automatic cold start device, allows progressive starts in environments with a rigid climate.
- Exclusive oleodynamic block, has allowed to eliminate all the problems caused by the presence of the microswitches and of the electro-valves and finally, all the maintenance problems that were deduced from it.
      - Thermostat to control the oil temperature.
           levelstate to avoid oil loss.
      - Installation of closed-circuit oil cooling.
- Depth of the machine 1,450 mm
- Machine width 1,120 mm.
- Machine height 1,405 mm.
- Machine weight 660 kg.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Output 70 kg/h
Briquette Diameter 70 mm
Briquette Length Max  mm
Motor Power 5.6 kW
-------------------
Length x width x height 1450.0 × 1120.0 × 1405.0
Weight 660 kg
Worked hours
Hours under power
State good
At local norms ---------
Status
Datasheet Comafer DINAMIC 70 N
Client type Reseller
Active since 2020
Offers online 29
Last activity March 28, 2024

Description

Briquetadora Cofamer Dinamic 70 N Ocasion

TECHNICAL CHARACTERISTICS.
- Fully oleodynamic machine without electrical parts except for the electrical panel
      for starting the engine.
- Production 30/70 KG / H.
- Pump motor (HP 7.5)
- Briquette O 55 MM
- Electric control panel.
- Special conical ferrule to prevent material bridges (base O 1000 to O 900).
- Number 7 cycles / min.
- Pushing power approx. 700 Kg / cm2.
- Number 3 cylinders.
- Number 1 round automatic centering jaw in a monoblock strapless indestructible.
- Briquette cylinder O 120 mm.
- Briquette length max. 50 mm
- Timed automatic cold start device, allows progressive starts in environments with a rigid climate.
- Exclusive oleodynamic block, has allowed to eliminate all the problems caused by the presence of the microswitches and of the electro-valves and finally, all the maintenance problems that were deduced from it.
      - Thermostat to control the oil temperature.
           levelstate to avoid oil loss.
      - Installation of closed-circuit oil cooling.
- Depth of the machine 1,450 mm
- Machine width 1,120 mm.
- Machine height 1,405 mm.
- Machine weight 660 kg.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Output 70 kg/h
Briquette Diameter 70 mm
Briquette Length Max  mm
Motor Power 5.6 kW
-------------------
Length x width x height 1450.0 × 1120.0 × 1405.0
Weight 660 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2020
Offers online 29
Last activity March 28, 2024