Automatic washing system with manual door for washing and drying of racks in the centrifugal system
Year of construction: 2013
Performance: 6-15 racks per hour
The washer is expressly for cleaning and drying of the following equipment:
Trolleys with different number of trays up to max. 865x660mm, 1950mm / h
Trolleys with different number of trays up to max. 1065x660mm, 1950mm / h
Perforated trays with edges on 3 sides 20mm high, 580x980mm lying on the trolley (ATTENTION, the sheets do not become completely dry in the middle, in the holes water remains)
Cutting sheets 600x200mm, 50mm high (special cars)
Cake rings 180 to 360mm, 50mm high (80% of the rings are 200mm)
Format change is simple and secure
Rack washer made entirely of stainless steel (AISI 304) and other food grade materials.
Insulated double wall insulated with cell-poly-urethane, for the guarantee of low surface temperature and low noise level.
All sides and inside edges are rounded (average radius 20mm).
Slides and bowls tilted for optimal water drainage, no accumulation of water and dirt, according to GMP standard.
System fully equipped with safety devices for staff and laundry
Wash cycle with the following phases:
Electrical system with Siemens S7 control and OP 77A Control panel with stainless steel cover and Plexiglas door for protection. The system is IP65 protected according to the machine directive No. 2006/42 / EEC and No. 2006/95 / EEC.
The wash cycle can be programmed by the control panel with the following parameters:
Cleaner dosage ON / OFF
Drying ON / OFF
Rotation speed during drying
Fume extraction (fan included)
Package consisting of:
1. Automatic car wash with manual door for washing and drying rack in the centrifugal system
2. Boiler for heating the rinse water
3. Special car for washing cut sheets or rings
4. System for receiving the car with 100cm length and 85cm length
Please note that this description may have been translated automatically. Contact us for further information.