Price on request
Make an offer| Type | C-Frame |
| Power in tons | 160 T |
| Table length | 1100 mm |
| Table width | 660 mm |
| Ram stroke | 200 mm |
| Nbr of strokes/min | 100 |
| Engine Power | 22 kW |
| ------------------- | |
| Weight | 3600 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | no |
| status | |
| Last availability date | 02/03/2026 |
This listing is for a Colombo Agostino mechanical press, model TON. 160, featuring a C-frame design. The press has a nominal thrust capacity of 160 tons and a ram stroke of 200 mm. It is equipped with a worktable measuring 1100 mm in length and 660 mm in width, providing a substantial surface area for various pressing operations. The machine operates at up to 100 strokes per minute and is powered by a 22 kW engine.
The press includes several functional components such as balancing cylinders and a grease lubrication system to support smooth operation. It also features a system for tilting the press structure, enhancing versatility during use. The guide rail height is 630 mm, with vertical adjustment capability of 100 mm, allowing for precise control over the pressing process.
Additional specifications include a blank holder table sized at 480 x 480 mm with a stroke of 100 mm, and a lower shelf size of 1100 x 660 mm. The maximum light opening is approximately 600 mm, and the bat size measures 625 x 425 mm. The press has an approximate total weight of 3600 kg.
Visually, the machine is painted blue and appears clean and well-maintained with no visible rust or significant damage. A yellow safety guard is installed around the pressing area, visible through a transparent panel, contributing to operator safety. The control panel is mounted on the right side of the machine and includes various knobs and switches for operation. A large flywheel is located on the upper left side of the press. Some cables and wires are hanging loosely on the right side, and metal rods or tools are resting on the worktable surface.
Please note that the electrical system, safety equipment, and accident-prevention protections are excluded from this offer and may require overhaul or installation.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Used mechanical press "AGOSTINO COLOMBO" SWAN COLLAR FROM TON. 160
Nominal thrust ton. 160
Stroke mm. 200
Guide rail height mm. 630
Vertical adjustment mm. 100
Strokes / minute From 25 to 75
Engine HP 22 / 7.3
Lower shelf size mm. 1100X660
Max light approx. Mm. 600
Bat size mm. 625X425
Lower blank holder From ton. 10 (at 6 bar)
Blank holder table dimensions mm. 480x480
100 mm blank holder stroke
Approximate weight Ton. 12.5
Overall height (total) mm. 3600
Frontal dimensions (left / right) mm 1300/1400
Front / back dimensions mm. 2000
The press is complete with: Balancing cylinders - Grease lubrication - System for tilting the press structure.
Excluding overhaul of electrical system and safety equipment and accident-prevention protections.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
Has this Colombo Agostino TON. 160 press been refurbished?
This Colombo Agostino TON. 160 press has been mechanically refurbished.
What is the extractor cushion capacity of this equipment?
This equipment features an extractor cushion with a capacity of 10 tons.
What air pressure does this Colombo Agostino TON. 160 press operate at?
This Colombo Agostino TON. 160 press operates at an air pressure of 6 bar.
What is the extraction stroke length of this press?
This press has an extraction stroke of 100 mm.
Have the electrical components of this Colombo Agostino TON. 160 press been refurbished?
The electrical components of this Colombo Agostino TON. 160 press have not been refurbished.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery manufacturer |
| Active since | 2012 |
| Offers online | 12 |
| Last activity | April 16, 2026 |
Used mechanical press "AGOSTINO COLOMBO" SWAN COLLAR FROM TON. 160
Nominal thrust ton. 160
Stroke mm. 200
Guide rail height mm. 630
Vertical adjustment mm. 100
Strokes / minute From 25 to 75
Engine HP 22 / 7.3
Lower shelf size mm. 1100X660
Max light approx. Mm. 600
Bat size mm. 625X425
Lower blank holder From ton. 10 (at 6 bar)
Blank holder table dimensions mm. 480x480
100 mm blank holder stroke
Approximate weight Ton. 12.5
Overall height (total) mm. 3600
Frontal dimensions (left / right) mm 1300/1400
Front / back dimensions mm. 2000
The press is complete with: Balancing cylinders - Grease lubrication - System for tilting the press structure.
Excluding overhaul of electrical system and safety equipment and accident-prevention protections.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
Has this Colombo Agostino TON. 160 press been refurbished?
This Colombo Agostino TON. 160 press has been mechanically refurbished.
What is the extractor cushion capacity of this equipment?
This equipment features an extractor cushion with a capacity of 10 tons.
What air pressure does this Colombo Agostino TON. 160 press operate at?
This Colombo Agostino TON. 160 press operates at an air pressure of 6 bar.
What is the extraction stroke length of this press?
This press has an extraction stroke of 100 mm.
Have the electrical components of this Colombo Agostino TON. 160 press been refurbished?
The electrical components of this Colombo Agostino TON. 160 press have not been refurbished.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Type | C-Frame |
| Power in tons | 160 T |
| Table length | 1100 mm |
| Table width | 660 mm |
| Ram stroke | 200 mm |
| Nbr of strokes/min | 100 |
| Engine Power | 22 kW |
| ------------------- | |
| Weight | 3600 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | no |
| status | |
| Last availability date | 02/03/2026 |
This listing is for a Colombo Agostino mechanical press, model TON. 160, featuring a C-frame design. The press has a nominal thrust capacity of 160 tons and a ram stroke of 200 mm. It is equipped with a worktable measuring 1100 mm in length and 660 mm in width, providing a substantial surface area for various pressing operations. The machine operates at up to 100 strokes per minute and is powered by a 22 kW engine.
The press includes several functional components such as balancing cylinders and a grease lubrication system to support smooth operation. It also features a system for tilting the press structure, enhancing versatility during use. The guide rail height is 630 mm, with vertical adjustment capability of 100 mm, allowing for precise control over the pressing process.
Additional specifications include a blank holder table sized at 480 x 480 mm with a stroke of 100 mm, and a lower shelf size of 1100 x 660 mm. The maximum light opening is approximately 600 mm, and the bat size measures 625 x 425 mm. The press has an approximate total weight of 3600 kg.
Visually, the machine is painted blue and appears clean and well-maintained with no visible rust or significant damage. A yellow safety guard is installed around the pressing area, visible through a transparent panel, contributing to operator safety. The control panel is mounted on the right side of the machine and includes various knobs and switches for operation. A large flywheel is located on the upper left side of the press. Some cables and wires are hanging loosely on the right side, and metal rods or tools are resting on the worktable surface.
Please note that the electrical system, safety equipment, and accident-prevention protections are excluded from this offer and may require overhaul or installation.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery manufacturer |
| Active since | 2012 |
| Offers online | 12 |
| Last activity | April 16, 2026 |
Механична преса Colombo Agostino TON. 160
Mechanický lis Colombo Agostino TON. 160
Colombo Agostino TON. 160 Mekanisk presse
Colombo Agostino TON. 160 Mechanische Presse
Μηχανική πρέσα Colombo Agostino TON. 160
Colombo Agostino TON. 160 Mechanical press
Prensa mecánica Colombo Agostino TON. 160
Presse mécanique Colombo Agostino TON. 160
Mehanička preša Colombo Agostino TON. 160
Colombo Agostino TON. 160 Mechanikus prés
Pressa meccanica Colombo Agostino TON. 160
Mechaninis presas Colombo Agostino TON. 160
Colombo Agostino TON. 160 Mechanische pers
Prasa mechaniczna Colombo Agostino TON. 160
Prensa mecânica Colombo Agostino TON. 160
Presă mecanică Colombo Agostino TON. 160
Colombo Agostino TON. 160 Механические прессы
Mehanička presa Colombo Agostino TON. 160
Colombo Agostino TON. 160 Mekanisk press
Mekanik presler Colombo Agostino TON. 160
EN
- Languages
English (GB)