Price on request
Make an offer| Power in tons | 400 T |
| Type | C-Frame |
| Table length | 1200 mm |
| Table width | 1000 mm |
| Ram stroke | 900 mm |
| Engine Power | 37.28561 kW |
| ------------------- | |
| Length x width x height | 2000.0 × 2600.0 × 5200.0 |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | visible |
| Last availability date | 14/04/2026 |
This is a Collo di Cigno hydraulic press with a 400-ton capacity, designed in a C-frame configuration. The machine features a ram stroke of 900 mm, allowing for substantial pressing depth. The press table measures 1200 mm in length and 1000 mm in width, providing a robust surface area for various pressing tasks. Overall, the machine's dimensions are 2000 mm in length, 2600 mm in width, and 5200 mm in height, making it a sizable piece of industrial equipment.
The press is powered by a motor rated at approximately 37.3 kW (50 HP) and operates on a current supply of 380 V at 50 Hz. The hydraulic system includes a tank with a capacity of about 550 liters, supporting the press's operation. The height from the ground floor to the working surface is 1500 mm, with a pit height of 870 mm, facilitating ease of access and operation.
The machine's body is painted green with a yellow pressing plate, which shows signs of wear and rust, indicating previous use. Metal stairs with handrails are positioned adjacent to the press to provide operator access. The control panel includes multiple buttons, switches, and a digital display, with visible wiring and a warning label indicating a 400-volt electrical supply. The control panel exterior shows some dirt and wear consistent with industrial use.
Overall, the press exhibits visible dirt and minor rust spots, reflecting its operational history within an industrial facility. It is installed indoors, under a high ceiling with metal beams. This hydraulic press is suitable for heavy-duty pressing applications requiring a high tonnage capacity and a spacious working area.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Capacity 400 TON
Piston stroke 900 mm
Height of ground floor 1500 mm
Height of pit 870 mm
Dimensions of floor 2000 × 1000 mm
Dimensions against bed 1200 × 1000 mm
Overall dimensions 2000x2600x5200h mm
Current 380v 50 Hz
Motor 50Hp
Tank capacity About 550 liters
Status Visible in operation
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
What is the capacity of this COLLO DI CIGNO hydraulic press?
This COLLO DI CIGNO hydraulic press has a capacity of 400 tons.
How much oil does the hydraulic press require to operate?
This hydraulic press requires approximately 800 liters of oil to operate.
What is the power requirement of this COLLO DI CIGNO hydraulic press?
This COLLO DI CIGNO hydraulic press has a power requirement of 50 kW.
Is this hydraulic press currently operational?
The unit is currently not operational due to the removal of hydraulic oil.
Can this equipment be tested in operation?
This equipment is available for viewing but cannot be tested in operation without new oil.
What was done during the last service of the machine?
The last service of the machine involved the removal of old hydraulic oil for transport.
Is this COLLO DI CIGNO hydraulic press sold as-is?
This COLLO DI CIGNO hydraulic press is being sold as-is, without the ability to test it in operation.
What is the current condition of the machine?
The machine is currently in the same condition as previously reported.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2016 |
| Offers online | 31 |
| Last activity | April 13, 2026 |
Capacity 400 TON
Piston stroke 900 mm
Height of ground floor 1500 mm
Height of pit 870 mm
Dimensions of floor 2000 × 1000 mm
Dimensions against bed 1200 × 1000 mm
Overall dimensions 2000x2600x5200h mm
Current 380v 50 Hz
Motor 50Hp
Tank capacity About 550 liters
Status Visible in operation
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
What is the capacity of this COLLO DI CIGNO hydraulic press?
This COLLO DI CIGNO hydraulic press has a capacity of 400 tons.
How much oil does the hydraulic press require to operate?
This hydraulic press requires approximately 800 liters of oil to operate.
What is the power requirement of this COLLO DI CIGNO hydraulic press?
This COLLO DI CIGNO hydraulic press has a power requirement of 50 kW.
Is this hydraulic press currently operational?
The unit is currently not operational due to the removal of hydraulic oil.
Can this equipment be tested in operation?
This equipment is available for viewing but cannot be tested in operation without new oil.
What was done during the last service of the machine?
The last service of the machine involved the removal of old hydraulic oil for transport.
Is this COLLO DI CIGNO hydraulic press sold as-is?
This COLLO DI CIGNO hydraulic press is being sold as-is, without the ability to test it in operation.
What is the current condition of the machine?
The machine is currently in the same condition as previously reported.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Power in tons | 400 T |
| Type | C-Frame |
| Table length | 1200 mm |
| Table width | 1000 mm |
| Ram stroke | 900 mm |
| Engine Power | 37.28561 kW |
| ------------------- | |
| Length x width x height | 2000.0 × 2600.0 × 5200.0 |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | visible |
| Last availability date | 14/04/2026 |
This is a Collo di Cigno hydraulic press with a 400-ton capacity, designed in a C-frame configuration. The machine features a ram stroke of 900 mm, allowing for substantial pressing depth. The press table measures 1200 mm in length and 1000 mm in width, providing a robust surface area for various pressing tasks. Overall, the machine's dimensions are 2000 mm in length, 2600 mm in width, and 5200 mm in height, making it a sizable piece of industrial equipment.
The press is powered by a motor rated at approximately 37.3 kW (50 HP) and operates on a current supply of 380 V at 50 Hz. The hydraulic system includes a tank with a capacity of about 550 liters, supporting the press's operation. The height from the ground floor to the working surface is 1500 mm, with a pit height of 870 mm, facilitating ease of access and operation.
The machine's body is painted green with a yellow pressing plate, which shows signs of wear and rust, indicating previous use. Metal stairs with handrails are positioned adjacent to the press to provide operator access. The control panel includes multiple buttons, switches, and a digital display, with visible wiring and a warning label indicating a 400-volt electrical supply. The control panel exterior shows some dirt and wear consistent with industrial use.
Overall, the press exhibits visible dirt and minor rust spots, reflecting its operational history within an industrial facility. It is installed indoors, under a high ceiling with metal beams. This hydraulic press is suitable for heavy-duty pressing applications requiring a high tonnage capacity and a spacious working area.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2016 |
| Offers online | 31 |
| Last activity | April 13, 2026 |
COLLO DI CIGNO 400 TON
Hydraulický lis COLLO DI CIGNO 400 TON
COLLO DI CIGNO 400 TON
COLLO DI CIGNO 400 TON Hydraulikpresse
COLLO DI CIGNO 400 TON
COLLO DI CIGNO 400 TON Hydraulic press
Prensa hidráulica COLLO DI CIGNO 400 TON
Presse hydraulique COLLO DI CIGNO 400 TON
COLLO DI CIGNO 400 TON
COLLO DI CIGNO 400 TON
Pressa idraulica COLLO DI CIGNO 400 TON
COLLO DI CIGNO 400 TON
COLLO DI CIGNO 400 TON
Prasa hydrauliczna COLLO DI CIGNO 400 TON
COLLO DI CIGNO 400 TON
COLLO DI CIGNO 400 TON
COLLO DI CIGNO 400 TON Гидравлический пресс
COLLO DI CIGNO 400 TON
COLLO DI CIGNO 400 TON
Hidrolik Pres COLLO DI CIGNO 400 TON
EN
- Languages
English (GB)