*FANUC 18i-TB CONTROL

HEAD:
*Tipping diameter on the bed: 685 mm.
*Maximum diameter on carriage: 510 mm
*Maximum turnable diameter: 450 mm.
*Nose of head shaft: "ASA 6" "A2"
*Outer diameter of the bearings: 140 mm.
*Inner diameter of the bearings: 90 mm.
*Plate diameter: 165 mm.
*Internal diameter of the head: 57 mm.
*Bar pitch: 46 mm.
*Maximum head speed: 5000 rpm.
*Head power: 14/8 kW

AXES:
*X axis travel: 240 (225+15) mm.
*Z axis travel: 640 mm.
*B axis travel: 540 mm.
*Rapid advances X/Z/B: 18/24/24 m/min.

SUBHEAD:
*Maximum speed: 5000 rpm.
*Outer diameter of the bearings: 125 mm.
*Inner diameter of the bearings: 80 mm.
*Nose of head shaft: "ASA 5" "A2"
*Inner diameter of the head: 43 mm.
*Bar pitch: 32 mm.
*Plate diameter: 130 mm.
*Head power: 14/8 kW

GENERAL:
*Capacity of the coolant tank: 240 l.
*Total installed power: 50 KVA
*Operating voltage: 380 V 50 Hz ±5%
*Length: 2322 mm.
*Width: 1603 mm.
*Height: 1800 mm.
*Approximate weight: 5500 Kg.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Turning length 450 mm
Turning Ø 685 mm
Ø above transversing slide 510 mm
Length between centers 55 mm
Type of CNC FANUC 18i-TB
X-axis 240 mm
Z-axis 60 mm
Spindle taper “ASA 6” “A2”
Spindle bore 57 mm
Number of tools on turret 12
Turning speed 5000 rpm
Spindle motor power 14 kW
Tailstock no
Bar feeder yes
-------------------
Length x width x height 2322.0 × 1603.0 × 1800.0
Weight 5500 kg
Worked hours
Hours under power
State good
At local norms ---------
Status
cmz-tl15-ms-p231204079_8.pdf Download
Client type Reseller
Active since 2013
Offers online 34
Last activity March 28, 2024

Description

*FANUC 18i-TB CONTROL

HEAD:
*Tipping diameter on the bed: 685 mm.
*Maximum diameter on carriage: 510 mm
*Maximum turnable diameter: 450 mm.
*Nose of head shaft: "ASA 6" "A2"
*Outer diameter of the bearings: 140 mm.
*Inner diameter of the bearings: 90 mm.
*Plate diameter: 165 mm.
*Internal diameter of the head: 57 mm.
*Bar pitch: 46 mm.
*Maximum head speed: 5000 rpm.
*Head power: 14/8 kW

AXES:
*X axis travel: 240 (225+15) mm.
*Z axis travel: 640 mm.
*B axis travel: 540 mm.
*Rapid advances X/Z/B: 18/24/24 m/min.

SUBHEAD:
*Maximum speed: 5000 rpm.
*Outer diameter of the bearings: 125 mm.
*Inner diameter of the bearings: 80 mm.
*Nose of head shaft: "ASA 5" "A2"
*Inner diameter of the head: 43 mm.
*Bar pitch: 32 mm.
*Plate diameter: 130 mm.
*Head power: 14/8 kW

GENERAL:
*Capacity of the coolant tank: 240 l.
*Total installed power: 50 KVA
*Operating voltage: 380 V 50 Hz ±5%
*Length: 2322 mm.
*Width: 1603 mm.
*Height: 1800 mm.
*Approximate weight: 5500 Kg.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Turning length 450 mm
Turning Ø 685 mm
Ø above transversing slide 510 mm
Length between centers 55 mm
Type of CNC FANUC 18i-TB
X-axis 240 mm
Z-axis 60 mm
Spindle taper “ASA 6” “A2”
Spindle bore 57 mm
Number of tools on turret 12
Turning speed 5000 rpm
Spindle motor power 14 kW
Tailstock no
Bar feeder yes
-------------------
Length x width x height 2322.0 × 1603.0 × 1800.0
Weight 5500 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2013
Offers online 34
Last activity March 28, 2024

Here is a selection of similar machines

CMZ TL15 MS cnc lathe