Sorry, this offer is no longer available on Exapro

Used Cm Macchine BASIC 350 Used multihead moulder

Here is a selection of similar machines

Planer for beams CM MACHINES model BASIC 350:
- max working size 350 x h = 250mm
- measure min. working 40 x h = 20mm
- motorized adjustment of the working thickness
- motorized adjustment of the working width
- separate electrical panel, with digital indicators
Advancement:
- forward speed adjustable with inverter
- upper input toothed roller
- upper + lower toothed pulling roller, before the 1st shaft
- smooth upper + lower towing roller, after the 2nd shaft
- double rubberised upper towing roller, after the spindle moulders
Trees:
- lower KW 7,5 (HP 10)
- upper KW 11 (HP 15)
- right KW 11 (HP 15)
- left KW 11 (HP 15)
Machine supplied with:
- idle roller conveyor at 4200x500mm
- outfeed support rollers
- 4 knife heads
- protection cabin
Machine according to CE standards

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Working width 350 mm
Working height 250 mm
Nbr of shafts 4
Shafts diameter 50 mm
Sound proof cabin Yes
Feeding table length 0 mm
Feed speed 20 m/min
Engine power 50 kW
-------------------
Length x width x height 2500.0 × 2000.0 × 2000.0
Weight 2800 kg
Worked hours
Hours under power
State in working conditions
At local norms yes
Status visible but unplugged
Client type Reseller
Active since 2008
Offers online 33
Last activity March 28, 2024

Description

Planer for beams CM MACHINES model BASIC 350:
- max working size 350 x h = 250mm
- measure min. working 40 x h = 20mm
- motorized adjustment of the working thickness
- motorized adjustment of the working width
- separate electrical panel, with digital indicators
Advancement:
- forward speed adjustable with inverter
- upper input toothed roller
- upper + lower toothed pulling roller, before the 1st shaft
- smooth upper + lower towing roller, after the 2nd shaft
- double rubberised upper towing roller, after the spindle moulders
Trees:
- lower KW 7,5 (HP 10)
- upper KW 11 (HP 15)
- right KW 11 (HP 15)
- left KW 11 (HP 15)
Machine supplied with:
- idle roller conveyor at 4200x500mm
- outfeed support rollers
- 4 knife heads
- protection cabin
Machine according to CE standards

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Working width 350 mm
Working height 250 mm
Nbr of shafts 4
Shafts diameter 50 mm
Sound proof cabin Yes
Feeding table length 0 mm
Feed speed 20 m/min
Engine power 50 kW
-------------------
Length x width x height 2500.0 × 2000.0 × 2000.0
Weight 2800 kg
Worked hours
Hours under power
State in working conditions
At local norms yes
Status visible but unplugged

About this seller

Client type Reseller
Active since 2008
Offers online 33
Last activity March 28, 2024