You have the same machine to sell?

Add it to our catalogue for FREE

Start selling

About this seller

Client type Reseller
Active since 2013
Offers online 7
Last activity Feb. 19, 2021


Output 7500 u/mn
Length x width x height 3600.0 × 1100.0 × 2100.0
Worked hours
Hours under power
State good
At local norms yes
Status visible


New Christieans CS01S cucumbers shrink wrapping machine.
Sealing cucumbers is great way to extent the freshnes of cucumbers and also add value to the procuts.
Duijndam Machines is dealer of the new Christiaens Agro stainless steel cucumber sealing machine. Machine can be supplied from stock.
Christiaens Agro Systems has specialised in the development and manufacturing of machines for asparagus, leeks, spring onions and cucumbers. Christiaens built a machine for packing cucumbers and other vegetables. This machine is based and improved on the principle of the Vito sealing machine.
Important advantage of this cucumber sealing machine are:
The single knife system, which results in a limited use of foil with a saving of up to 20%.
The good quality of the sealing seam.
The stainless steel machine is just about maintenance free and is user friendly.
Adjustable speed.
Optional: Infeed conveyor system
This machine has been designed for sealing cucumber and vegetables, like leek, big carrots, courgette, corn, etc. It wraps the products airtight in foil. Moisture loss is thus prevented so that the durability is enhanced.
How this cucumber shrink wrapper works: 
The machine consists of a seal and a shrinking unit, the processing is adjustable.
The chain transports the product through the seal and shrink unit.
The seal unit operates with two foil roles, one of the roles is driven by an electromagnetic clutch.
When the cucumber is wrapped into the foil and cut it goes to the shrink unit where the foil shrinks tightly around the cucumber.
The shrink unit consists of two shrink ovens, the products going between them. After shrinking, the product would be cooled by a cold air blower.
Benefits of cucumbers sealer CS01S
Capacity to 7.500 pieces / hour (in combination with the supply system explaimed below)
Perfect seal seam 
Very economical with foil because of the one sealing bar system. Saving up to 20% 
Frame and parts made of stainless steel, so maintenance free and "food friendly" 
Easy operation 
Les susceptible to failure
Low maintenance 
Very long life 
Easy and quick change film rolls 
32 Amp socket 
English manual can be send to you on request.
Supply system200 cm flat conveyor with inverter
Compartment elevator, follows speed of the sealer
Made of stainless steel
Turn table with diameter of 190 cm
Wired and powered according UL-CSA standards for USA customers, 400 Volt 60 Hz, € 1500,-
Technical specifications:
Model: CS01S
Year: 2020
Motor: 400V, 3 phase + 0, 32A
Capacity: 7500 pieces / hour
Dimensions: 360 cm x 110 cm x 210 cm (length x width x height)
Material: RVS304

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

How does Exapro work?

Using Exapro is super easy, here is how it works

Here is a selection of similar machines

Contact the seller