CHENDE mod. CJ 180 M3V Injection Moulding Machine– Euromap: MM 795/180
Control UT NC-3000
Year 2003-08 – Excellent condition.
Connection hours: 14360.
Screw diameter: 52 mm.
Inkection volume: 488 cm3.
Injection capacity: 459 gr.
Injection pressure: 1.630 bar.
Clamping force: 180 ton.
Opening travel: 460 mm.
Plates dimensions: 745 x 715 mm.
Tie bar distance: 505 x 500 mm.
Maximum span: 960 mm.
Mould thickness min. / max.: 180 / 500 mm.
Hydraulic ejector travel: 130 mm.
Power and General data.-
Drying hopper with automatic pellet loading.
Motor power: 18.5 kw. – 380 v., 50 Hz.
Heating power: 9.76 kw.
Vacuum cycle: 4.5 c/segundo.
Oil capacity: 260 l.
Machine dimensions: L 5.200, W 1.300, H 1.900 mm.
Net weight.- 5.000 kg.
-Able to operate in : Manual, Semi-automatic and Automatic mode.
-UT NC-3000 control is based in a Distributed Architecture System with a high speed Bus (PC 104) which connects the different modules and the processor.
-It can be expandable with additional modules for the different machine options, eliminating the majority of the machine wiring.
-The high speed Bus (7 cables) goes through the machine interconnecting the different input, output, temperature etc., modules which can be strategically located near the electrovalves, limit switches, thermocouples, etc, avoiding that the wiring of these elements should arrive at the main electrical cabinet.
-CPU: 486 Sx 40 Mhz.
-Ram memory: 4 MB.
-CGA: With LCD screen adapter.
-Parallel port 26 DIL with connector to printer +2 series ports.
-Solid Estate Drive (SSD): Memory capaicyt 4 MB.
-PC 104: Analog Master I/O and module Bus I/O, directly connected to processing module, without wiring via connector PC 104 type.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase