Vacuum thermoforming packaging machine CFS TIROMAT, type: Tiromat 3000 / 430 for soft film

Condition Very good, overhauled
Type of film Soft film
Upper film layer 420 - 430 mm
Lower film layer 430 mm +2/-0 mm
Feed 450 mm
Foil roll holders 3 rolls
Free insertion distance approx. 1,000 mm
Nominal suction capacity 160 cbm/h (evacuation)
Outfeed conveyor 750 mm
Machine length approx. 7 m
Electrical connection 400 V, 50 Hz
Required compressed air approx. 1,000 l/min

3 packs per cycle (433-3.1)
- 3 chambers side by side x 1 row
- Per chamber: outer dimension approx.: 450 x 134 mm, inner dimension approx.: 433 x 117 mm, drawing depth: variable 10 - 130 mm (in 5 mm increments)

4 packs per cycle (208 - 2.2)
- 2 chambers next to each other x 2 rows behind each other
- Per chamber: outer dimension approx.: 225 x 201 mm, inner dimension approx.: 208 x 184 mm, drawing depth: variable 10 - 130 mm (in 5 mm increments)

Specification:

- SIEMENS control (programmable)
- Film advance in 2 speeds (via drive motor)
- Film preheating from above (integrated in forming station)
- Evacuation and gassing via nozzle bar
- Vacuum pump BUSCH, 1 stage
- Protective bonnets with electromagnetic locking device
- Sealing and evacuating station
- 2x guillotine cross cutter with counter holder from below
- Longitudinal cutting for 2 and 3 webs
- Edge trim removal via suction unit with container
- Outfeed conveyor with cardan drive

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Moulding length 450 mm
Moulding width 134 mm
Forming depth 130 mm
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status visible
Client type Reseller
Active since 2017
Offers online 77
Last activity March 28, 2024

Description

Vacuum thermoforming packaging machine CFS TIROMAT, type: Tiromat 3000 / 430 for soft film

Condition Very good, overhauled
Type of film Soft film
Upper film layer 420 - 430 mm
Lower film layer 430 mm +2/-0 mm
Feed 450 mm
Foil roll holders 3 rolls
Free insertion distance approx. 1,000 mm
Nominal suction capacity 160 cbm/h (evacuation)
Outfeed conveyor 750 mm
Machine length approx. 7 m
Electrical connection 400 V, 50 Hz
Required compressed air approx. 1,000 l/min

3 packs per cycle (433-3.1)
- 3 chambers side by side x 1 row
- Per chamber: outer dimension approx.: 450 x 134 mm, inner dimension approx.: 433 x 117 mm, drawing depth: variable 10 - 130 mm (in 5 mm increments)

4 packs per cycle (208 - 2.2)
- 2 chambers next to each other x 2 rows behind each other
- Per chamber: outer dimension approx.: 225 x 201 mm, inner dimension approx.: 208 x 184 mm, drawing depth: variable 10 - 130 mm (in 5 mm increments)

Specification:

- SIEMENS control (programmable)
- Film advance in 2 speeds (via drive motor)
- Film preheating from above (integrated in forming station)
- Evacuation and gassing via nozzle bar
- Vacuum pump BUSCH, 1 stage
- Protective bonnets with electromagnetic locking device
- Sealing and evacuating station
- 2x guillotine cross cutter with counter holder from below
- Longitudinal cutting for 2 and 3 webs
- Edge trim removal via suction unit with container
- Outfeed conveyor with cardan drive

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Moulding length 450 mm
Moulding width 134 mm
Forming depth 130 mm
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status visible

About this seller

Client type Reseller
Active since 2017
Offers online 77
Last activity March 28, 2024

Here is a selection of similar machines

CFS Tiromat 3000 / 430 Thermoforming - Form, Fill and Seal Line