BELT MACHINE DYMOND SERIES
The use of cutting-edge components and a careful innovative and compact design, together with the use of high-performance and intuitive software, allow the Dymond series machines to adapt to the increasingly high standards imposed by food and pharmaceutical companies.

ADVANTAGES OF X-RAY INSPECTION
It is a non-destructive analysis which, without altering in any way the chemical composition and organoleptic properties of the products,
allows the detection of contaminants inside them (in any type of container
or packaging) and the verification of their completeness and conformity. The identifiable contaminants are all those having a higher density
to that of the inspected products: metals, glass, bones, stones, shells, ceramics, PVC, Viton®

- Power 200 W - 500 W
- Sensor resolution 0.8 mm
- Belt speed Up to 80 m / min
- Lead-free curtains
- Safety switch / interlock SIL 3 Category IV PLe, magnetic
- HMI 15 ”LCD - touch screen
- Operating temperature 5–40 ° C
- Relative humidity 20% –90% (no condensation)
- 230 VAC ± 10% (standard) single-phase power supply
- Compressed air 5.5-6.9 bar
- Refrigeration Air conditioner 500–750 W (IP34 or Nema4X – IP65)
- Radiation protection FDA CFR 21 part 1020.40
- International Protection Rating (IP) IP34 with standard air conditioner, IP65 with Nema4X air conditioner
- Ethernet connectivity options available with protocols: Modbus TCP (standard), OPC – DA, OPC – UA, XML messages over TCP and others on request
- Traceability options Complete recording of parameters, users and products

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

-------------------
Length x width x height 1400.0 × 1115.0 × 1990.0
Weight 750 kg
Worked hours 0 hours
Hours under power 0 hours
State new
At local norms yes
Status packed
Client type Machinery manufacturer
Active since 2022
Offers online 3
Last activity March 21, 2024

Description

BELT MACHINE DYMOND SERIES
The use of cutting-edge components and a careful innovative and compact design, together with the use of high-performance and intuitive software, allow the Dymond series machines to adapt to the increasingly high standards imposed by food and pharmaceutical companies.

ADVANTAGES OF X-RAY INSPECTION
It is a non-destructive analysis which, without altering in any way the chemical composition and organoleptic properties of the products,
allows the detection of contaminants inside them (in any type of container
or packaging) and the verification of their completeness and conformity. The identifiable contaminants are all those having a higher density
to that of the inspected products: metals, glass, bones, stones, shells, ceramics, PVC, Viton®

- Power 200 W - 500 W
- Sensor resolution 0.8 mm
- Belt speed Up to 80 m / min
- Lead-free curtains
- Safety switch / interlock SIL 3 Category IV PLe, magnetic
- HMI 15 ”LCD - touch screen
- Operating temperature 5–40 ° C
- Relative humidity 20% –90% (no condensation)
- 230 VAC ± 10% (standard) single-phase power supply
- Compressed air 5.5-6.9 bar
- Refrigeration Air conditioner 500–750 W (IP34 or Nema4X – IP65)
- Radiation protection FDA CFR 21 part 1020.40
- International Protection Rating (IP) IP34 with standard air conditioner, IP65 with Nema4X air conditioner
- Ethernet connectivity options available with protocols: Modbus TCP (standard), OPC – DA, OPC – UA, XML messages over TCP and others on request
- Traceability options Complete recording of parameters, users and products

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

-------------------
Length x width x height 1400.0 × 1115.0 × 1990.0
Weight 750 kg
Worked hours 0 hours
Hours under power 0 hours
State new
At local norms yes
Status packed

About this seller

Client type Machinery manufacturer
Active since 2022
Offers online 3
Last activity March 21, 2024

Here is a selection of similar machines

Dylog italia Dymond 120 Inspection machine