T B T (Germany)
CNC-controlled horizontal deep-hole drilling "Center"
Model BWP 250b built in 1996, but mechanically and electrically overhauled in 2006
___________________________________________________________________________________
Working range: X-axis, machine column cross 2,000 mm
Z-axis, horizontal drilling slide 1,200 mm
Drilling depth 1,000 mm
Y-axis, vertical drilling slide 1,100 mm
Table clamping surface 1,200 x 2,000 mm
Drilling capacity in solid material, approx. 4 - 25 mm
Tool holder taper HSK 50
Spindle speeds 1,260 - 15,000 rpm
Feed / fast feed, XYZ, infinitely variable 100 - 10,000 / 15,000 mm / min.
Force rate of the feed motors 27 Nm / 1,000 daN
Spindle drive infinitely variable 7 kW
Total electrical load, approx. 30 kW - 400 V - 50 Hz
Approximate weight. 10,000 kg
Accessories / special features:
- Ideal machine for complete machining of large workpieces such as tools e. dies (cooling holes), form and die plates, hydraulic parts etc. by deep hole drilling up to 25 x 1,000 mm, face milling up to Ø 60 mm, twist drilling, countersinking and tapping
up to M 24 x 3 mm.
- SIEMENS path control in 4 axes model 840 D, with process monitoring for coolant pressure, operating data monitoring, service life, feed force, fault diagnosis
and simple dialog programming directly on the panel etc.
- High-frequency spindle Make GAMFIOR with infinitely variable speeds
- Hydraulically movable drill bush carrier, 90 ° swiveling for holding drilling machines (ELB) or for picking
Remove regular tools such as twist drills, milling tools, taps, etc. from the tool changer.
- With automatic tool changer from MIKSCH, model CTM 40, with a 12-position tool changer mounted in a fixed position on the right-hand side of the machine housing, which only moves forwards and backwards for the tool change.
- Mounted index table as B-axis from FIBRO model RTN 400 = 420 x 420 mm,
- Extra rotary table from FIBRO with Ø 1,000 mm for indexing 3-144 positions
- Built-in coolant device with chip conveyor and various filters.
- 2 quiet breaks.
- Fully covered work area with front and side access.
Condition: Very good condition. This is a rare and valuable machine. Under power

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Max. boring Ø 25 mm
Workpiece length 2000 mm
Spindle speed 15000 rpm
Engine power 7 kW
-------------------
Weight 10000 kg
Worked hours
Hours under power
State rebuilt
At local norms ---------
Status
Client type Reseller
Active since 2019
Offers online 145
Last activity March 27, 2024

Description

T B T (Germany)
CNC-controlled horizontal deep-hole drilling "Center"
Model BWP 250b built in 1996, but mechanically and electrically overhauled in 2006
___________________________________________________________________________________
Working range: X-axis, machine column cross 2,000 mm
Z-axis, horizontal drilling slide 1,200 mm
Drilling depth 1,000 mm
Y-axis, vertical drilling slide 1,100 mm
Table clamping surface 1,200 x 2,000 mm
Drilling capacity in solid material, approx. 4 - 25 mm
Tool holder taper HSK 50
Spindle speeds 1,260 - 15,000 rpm
Feed / fast feed, XYZ, infinitely variable 100 - 10,000 / 15,000 mm / min.
Force rate of the feed motors 27 Nm / 1,000 daN
Spindle drive infinitely variable 7 kW
Total electrical load, approx. 30 kW - 400 V - 50 Hz
Approximate weight. 10,000 kg
Accessories / special features:
- Ideal machine for complete machining of large workpieces such as tools e. dies (cooling holes), form and die plates, hydraulic parts etc. by deep hole drilling up to 25 x 1,000 mm, face milling up to Ø 60 mm, twist drilling, countersinking and tapping
up to M 24 x 3 mm.
- SIEMENS path control in 4 axes model 840 D, with process monitoring for coolant pressure, operating data monitoring, service life, feed force, fault diagnosis
and simple dialog programming directly on the panel etc.
- High-frequency spindle Make GAMFIOR with infinitely variable speeds
- Hydraulically movable drill bush carrier, 90 ° swiveling for holding drilling machines (ELB) or for picking
Remove regular tools such as twist drills, milling tools, taps, etc. from the tool changer.
- With automatic tool changer from MIKSCH, model CTM 40, with a 12-position tool changer mounted in a fixed position on the right-hand side of the machine housing, which only moves forwards and backwards for the tool change.
- Mounted index table as B-axis from FIBRO model RTN 400 = 420 x 420 mm,
- Extra rotary table from FIBRO with Ø 1,000 mm for indexing 3-144 positions
- Built-in coolant device with chip conveyor and various filters.
- 2 quiet breaks.
- Fully covered work area with front and side access.
Condition: Very good condition. This is a rare and valuable machine. Under power

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Max. boring Ø 25 mm
Workpiece length 2000 mm
Spindle speed 15000 rpm
Engine power 7 kW
-------------------
Weight 10000 kg
Worked hours
Hours under power
State rebuilt
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2019
Offers online 145
Last activity March 27, 2024

Here is a selection of similar machines

TBT BWP 250 Deep hole drilling machine