DYNAMIC WEIGHT CONTROL LINE FOR TANKS UP TO 25L.



· A weight controller built entirely in stainless steel, with tapestry bands

· It will consist of an electronic equipment with a color touch screen for the indication of the different parameters (average weight, total weight, number of rejected containers, etc.).

Internal card with 6 inputs 12 configurable outputs

· USB port to store data on a flash drive.

· Sequential motorized belt 400 mm long x 300 mm wide with guides.

Motors with Driver to vary the speed.

· Motorized belt with 50kg HBM load cell, 500mm long x 300mm wide.

Motors with Driver to vary the speed.

· Stop line and alarm system with luminous acoustic beacon for alarm signal.

· Weighing functions:

.- Static and dynamic weighing, with management of a photocell to detect the decanter.

.- Dynamic weighing with two photocells, START / STOP type.

.- Static and dynamic weighing without photocell.



Tolerance check:

.- Through article file, with programming of 3 tolerance thresholds,

.- Programmable weight thresholds (minimum / maximum) with archive items.

.- Weight thresholds (minimum / maximum), quick introduction.

.- Calculation and printing of statistics and standard deviation of the executed weighings.

.- Static or dynamic auto-zero functions of the tape.



Load cell description: SP4MC6MR / 50Kg



.- Single cell load cell

.-Nominal capacity: 50 kg

.- Minimum division value: 2 g

.-Accuracy class according to OIML R60: C6MR

.-Maximum platform size:

.-450 x 450 mm according to OIML R76

.-Material: aluminum

.-Protection class according to IEC 529: IP67

.-Type of cable:

.-Shielded round cable, 6 wires,

.-PVC coating

.-Cable length: 3 m

.-Connector: CE 100F26-6

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Max capacity 25000 g
Precision 2 g
-------------------
Length x width x height 2000.0 × 800.0 × 1800.0
Weight 400 kg
Worked hours
Hours under power
State new
At local norms yes
Status packed
Client type Reseller
Active since 2015
Offers online 159
Last activity March 28, 2024

Description

DYNAMIC WEIGHT CONTROL LINE FOR TANKS UP TO 25L.



· A weight controller built entirely in stainless steel, with tapestry bands

· It will consist of an electronic equipment with a color touch screen for the indication of the different parameters (average weight, total weight, number of rejected containers, etc.).

Internal card with 6 inputs 12 configurable outputs

· USB port to store data on a flash drive.

· Sequential motorized belt 400 mm long x 300 mm wide with guides.

Motors with Driver to vary the speed.

· Motorized belt with 50kg HBM load cell, 500mm long x 300mm wide.

Motors with Driver to vary the speed.

· Stop line and alarm system with luminous acoustic beacon for alarm signal.

· Weighing functions:

.- Static and dynamic weighing, with management of a photocell to detect the decanter.

.- Dynamic weighing with two photocells, START / STOP type.

.- Static and dynamic weighing without photocell.



Tolerance check:

.- Through article file, with programming of 3 tolerance thresholds,

.- Programmable weight thresholds (minimum / maximum) with archive items.

.- Weight thresholds (minimum / maximum), quick introduction.

.- Calculation and printing of statistics and standard deviation of the executed weighings.

.- Static or dynamic auto-zero functions of the tape.



Load cell description: SP4MC6MR / 50Kg



.- Single cell load cell

.-Nominal capacity: 50 kg

.- Minimum division value: 2 g

.-Accuracy class according to OIML R60: C6MR

.-Maximum platform size:

.-450 x 450 mm according to OIML R76

.-Material: aluminum

.-Protection class according to IEC 529: IP67

.-Type of cable:

.-Shielded round cable, 6 wires,

.-PVC coating

.-Cable length: 3 m

.-Connector: CE 100F26-6

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Max capacity 25000 g
Precision 2 g
-------------------
Length x width x height 2000.0 × 800.0 × 1800.0
Weight 400 kg
Worked hours
Hours under power
State new
At local norms yes
Status packed

About this seller

Client type Reseller
Active since 2015
Offers online 159
Last activity March 28, 2024

Here is a selection of similar machines

Dynamic controller weight in stainless steel up to 25 kg.