Injection molding machine efficient in operation, connected to the media, giving the opportunity to check the operation of all functions, as well as start production to verify the condition of the injection molding machine.

In the years 2010-2018, the injection molding machine was equipped with a three-axis Wittmann W711 ROBOT, so the injection molding machine is 100% configured and prepared to work with a ROBOT
Additional information:
The Procan CT software in English or German is equipped with advanced functions for monitoring the injection process as well as monitoring all functions of the injection molding machine equipment
Touch screen + quick access keypad. Interface has a built-in memory for saving programs without the need to read data from a 3.5" floppy disk. Floppy disk drive: 3.5" allows data transfer in both directions

ATTENTION The injection mold and the mold mounting system visible in the picture are not included in the sale offer!

Manufacturer: BOY
Type: BOY 55A
Control: Procan CT
Year of construction: 2002
Opening hours: 50543 hours
Technical data:
Closing force: 350 kN
Column spacing: 360 x 335 mm (h/v)
M16 40/50 thread
Minimum mold mounting height: 250 mm
Maximum distance between plates: 650 mm
Opening distance: 400 mm
Opening force: 38 kN
Closing force: 24.4 kN
Ejector stroke: 80 mm
Ejector force: 20.4 kN
Centering hole diameter Movable plate D: 125 mm
Centering hole diameter Fixed plate D: 125 mm
Depth of nozzle entry into the mold 45 m

Technical data of the injection unit
tilting unit injection (to replace the nozzle and screw)
Injection unit travel: 210 mm
Maximum nozzle pressure 74.2 kN
Screw diameter: 38 mm
Injection capacity: 136.1 cc^
Injection pressure: 1508 bar
Screw length: 16.7L/D
Screw stroke: 120 mm
Screw speed: 10-395 min
Screw torque: 390 N
Injection speed 121.8 g/sec
Number of heating zones: 5
Nozzle path: 230 mm

Dimensions and weight
Machine dimensions LxWxH: 3330 x 1090 x 2040
Gross weight: 2490 kg
General information
Total installed power: 11/18.7 (400V)
Max hydraulic system pressure: 180 Bar
Oil Tank: 200L

Additional equipment:
1x CEE 16A socket
Schuko socket 10A 2x 230V
Feeding hopper with cover and guide
Rotameters 4x 10L/min
Leveling elements
Euromap 12 Robot Connector
Floppy Drive: 3.5"
Internal Memory YES
Access card YES
output: X232/1
Output: Printers
Air test connection
Light and sound signaling
Technical Documentation
Service Documentation
spare parts (nozzles, heaters, filters)

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Clamping force 350 T
Screw diameter 38 mm
Tie bar spacing (H) 360 mm
Tie bar spacing (V) 335 mm
Shot volume 136.1 cm³
Shot weight 129.8 g
Pressure on material 1508 bar
Platen length 539.5 mm
Platen width 565 mm
Bi-metal screw No
Equipped with robot No
Robot interface TAK
Number of heating zones 4
Opening of the press 400 mm
Mould size 250 mm
-------------------
Length x width x height 3330.0 × 1130.0 × 2040.0
Weight 2670 kg
Worked hours 50543 hours
Hours under power 50543 hours
State good
At local norms ---------
Status under power
Client type User – small or medium company
Active since 2022
Offers online 1
Last activity March 12, 2024

Description

Injection molding machine efficient in operation, connected to the media, giving the opportunity to check the operation of all functions, as well as start production to verify the condition of the injection molding machine.

In the years 2010-2018, the injection molding machine was equipped with a three-axis Wittmann W711 ROBOT, so the injection molding machine is 100% configured and prepared to work with a ROBOT
Additional information:
The Procan CT software in English or German is equipped with advanced functions for monitoring the injection process as well as monitoring all functions of the injection molding machine equipment
Touch screen + quick access keypad. Interface has a built-in memory for saving programs without the need to read data from a 3.5" floppy disk. Floppy disk drive: 3.5" allows data transfer in both directions

ATTENTION The injection mold and the mold mounting system visible in the picture are not included in the sale offer!

Manufacturer: BOY
Type: BOY 55A
Control: Procan CT
Year of construction: 2002
Opening hours: 50543 hours
Technical data:
Closing force: 350 kN
Column spacing: 360 x 335 mm (h/v)
M16 40/50 thread
Minimum mold mounting height: 250 mm
Maximum distance between plates: 650 mm
Opening distance: 400 mm
Opening force: 38 kN
Closing force: 24.4 kN
Ejector stroke: 80 mm
Ejector force: 20.4 kN
Centering hole diameter Movable plate D: 125 mm
Centering hole diameter Fixed plate D: 125 mm
Depth of nozzle entry into the mold 45 m

Technical data of the injection unit
tilting unit injection (to replace the nozzle and screw)
Injection unit travel: 210 mm
Maximum nozzle pressure 74.2 kN
Screw diameter: 38 mm
Injection capacity: 136.1 cc^
Injection pressure: 1508 bar
Screw length: 16.7L/D
Screw stroke: 120 mm
Screw speed: 10-395 min
Screw torque: 390 N
Injection speed 121.8 g/sec
Number of heating zones: 5
Nozzle path: 230 mm

Dimensions and weight
Machine dimensions LxWxH: 3330 x 1090 x 2040
Gross weight: 2490 kg
General information
Total installed power: 11/18.7 (400V)
Max hydraulic system pressure: 180 Bar
Oil Tank: 200L

Additional equipment:
1x CEE 16A socket
Schuko socket 10A 2x 230V
Feeding hopper with cover and guide
Rotameters 4x 10L/min
Leveling elements
Euromap 12 Robot Connector
Floppy Drive: 3.5"
Internal Memory YES
Access card YES
output: X232/1
Output: Printers
Air test connection
Light and sound signaling
Technical Documentation
Service Documentation
spare parts (nozzles, heaters, filters)

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Clamping force 350 T
Screw diameter 38 mm
Tie bar spacing (H) 360 mm
Tie bar spacing (V) 335 mm
Shot volume 136.1 cm³
Shot weight 129.8 g
Pressure on material 1508 bar
Platen length 539.5 mm
Platen width 565 mm
Bi-metal screw No
Equipped with robot No
Robot interface TAK
Number of heating zones 4
Opening of the press 400 mm
Mould size 250 mm
-------------------
Length x width x height 3330.0 × 1130.0 × 2040.0
Weight 2670 kg
Worked hours 50543 hours
Hours under power 50543 hours
State good
At local norms ---------
Status under power

About this seller

Client type User – small or medium company
Active since 2022
Offers online 1
Last activity March 12, 2024

Here is a selection of similar machines

BOY 55 A Injection moulding machine