CEFLA paint booth

The total length of the line is currently approximately 59.70 meters
The useful width with which we have worked is 1.2 meters; but the mat has a 1.6 so it may be that by making some modification the width can be used more. But that already depends on your needs
The first part (photos 1, 2, 3 and 4) are an open cabin to blow the pieces and some transfers from the entrance that could be removed if there was no room. We have them because before we painted cabinet doors and we needed them
In photo 5 you can see the detail of the last transfer before entering the robot, there is a blower bar to clean the parts just before entering the robot
In photos 6 and 7 you can see the exterior of the robot (entry and exit part)
In photo 8 you can see the skimmer to clean the water. The painting robot works with water, not with cardboard filters (water is cheaper). The dirty water from the booth passes through the skimmer where the remains of the product remain and the "clean" water re-enters the robot.
In photos 9, 10, 11 and 12 you can see the exit transfers, the evaporation tunnel, the low tunnel or TL and finally the high tunnel. In this area, some transfers could also be removed between the exit of the painting robot and the entrance to the evaporation tunnel, but that depends on the evaporation needs of your product. The tunnels have an AHU to guarantee that the air enters at the desired temperature and without dirt particles
The work face is against the wall, depending on how it is going to be placed, it is necessary to take into account leaving at least a one meter corridor to be able to open the robot door and remove the cleaning and recovery cart. In the plan I have indicated where the wall is with a straight line
I have also marked the skimmer area on the plan so that you can have an approximate idea of ​​the space it occupies

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

System -
Input Conveyor
Working width 1200 mm
Working length 60000 mm
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status visible
Client type User – large company
Active since 2021
Offers online 1
Last activity Aug. 31, 2023

Description

CEFLA paint booth

The total length of the line is currently approximately 59.70 meters
The useful width with which we have worked is 1.2 meters; but the mat has a 1.6 so it may be that by making some modification the width can be used more. But that already depends on your needs
The first part (photos 1, 2, 3 and 4) are an open cabin to blow the pieces and some transfers from the entrance that could be removed if there was no room. We have them because before we painted cabinet doors and we needed them
In photo 5 you can see the detail of the last transfer before entering the robot, there is a blower bar to clean the parts just before entering the robot
In photos 6 and 7 you can see the exterior of the robot (entry and exit part)
In photo 8 you can see the skimmer to clean the water. The painting robot works with water, not with cardboard filters (water is cheaper). The dirty water from the booth passes through the skimmer where the remains of the product remain and the "clean" water re-enters the robot.
In photos 9, 10, 11 and 12 you can see the exit transfers, the evaporation tunnel, the low tunnel or TL and finally the high tunnel. In this area, some transfers could also be removed between the exit of the painting robot and the entrance to the evaporation tunnel, but that depends on the evaporation needs of your product. The tunnels have an AHU to guarantee that the air enters at the desired temperature and without dirt particles
The work face is against the wall, depending on how it is going to be placed, it is necessary to take into account leaving at least a one meter corridor to be able to open the robot door and remove the cleaning and recovery cart. In the plan I have indicated where the wall is with a straight line
I have also marked the skimmer area on the plan so that you can have an approximate idea of ​​the space it occupies

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

System -
Input Conveyor
Working width 1200 mm
Working length 60000 mm
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status visible

About this seller

Client type User – large company
Active since 2021
Offers online 1
Last activity Aug. 31, 2023

Here is a selection of similar machines

CEFLA Spray booth