Adige laser tube LT 8 3500 watts
Year of construction 05/2014
Machine hours: approx. 46,000 / 23,000 hours - June 2020
Laser source: ROFIN SINAR DC 035 3500 watts
The LT8 system is equipped with a Rofin Sinar Slab laser from the DC series, which, thanks to the following features, enables optimal cutting quality at low operating costs:
- High radiation index (K factor> 0.9)
- No moving parts, therefore very low maintenance costs
- Minimal gas and electricity consumption.
Siemens Sinumerik 840D Solution Line
Max. Diameter round tubes: 220 mm
Max. Side length of rectangular tubes: 200 mm
Max. Tube length loading: 8,500 mm
Max. Tube length unloading: 6.500 mm
Max. Pipe weight: 35 kg / m
The LT8 is equipped with optical weld detection for the correct positioning of the machining.
Irregular cross sections and open profiles
Thanks to the effective and efficient processing of irregular cross sections and open profiles, LT8 is also suitable for innovative applications.
Inspection and management of the cutting process are also guaranteed with the LT8 by highly developed devices - among them the booster device for optimal laser plunge cutting.
With large pipes, three-dimensional machining is a decisive criterion for the performance of a system. The LT8 has a 3D head for angle cutting with the highest quality and accuracy.
LT8 users can benefit from a complete, reliable technological database of cutting parameters based on ADIGE's many years of experience in laser cutting.
Thanks to special functions such as on-line nesting (= nesting), rest piece optimization and reduction and entire bar processing, the bar is used optimally.
Two different loading stations guarantee more flexibility in the
Management of production lots. The system can be set up for processing open profiles and flat material in an automatic process;
Two automatic loading stations, front and rear, both equipped with measuring sensors; Three possible loading designs available (bulk loader, loading table for individually manually stored bars, step loader). Each loader can be connected to any tube loading station and is available in the 8500 mm version; Two different cross-sections can be managed simultaneously using the by-pass function; Additional protective elements are provided in the machine for processing heavy pipes or stainless steels to avoid possible damage to the pipe surface.
Four unloading positions for separate unloading of the cut pieces.
The use of specially developed software processes allows the rod to be optimized and used, thereby reducing the final waste to only 110 mm. Four possible unloading positions for sorting out the different, cut parts. Parts are supported by universal supports at every production step - for extremely precise machining even of long, heavy and / or complex parts. Reduced cycle times and intactness of the pipe surface are guaranteed by the special extraction pliers on the unloader.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase