Price on request
Make an offer| Strength | 100 T |
| Folding length | mm |
| Distance between uprights | mm |
| CNC | |
| Throat | mm |
| Vertical stroke | mm |
| Working speed | mm/s |
| Axis number | |
| Engine Power | kW |
| Hole | |
| ------------------- | |
| Length x width x height | - × - × - |
| Weight | kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 06/05/2026 |
This CNC press brake is manufactured by Blemas, model 100-33, and was produced in 1994. It features a pressing force of 100 tons and a working width of 3 meters, making it suitable for a variety of metal bending tasks. The machine is equipped with a Cybelec DNC 74 PSG CNC control system, providing precise and programmable control over bending operations.
The press brake has an approximate weight of 8 tons and overall dimensions of about 3,600 mm in length, 1,600 mm in width, and 2,600 mm in height. The machine's body is primarily blue and white, with visible yellow safety guards installed on the sides to enhance operator safety during use.
The working area includes metal bending dies and clamping components, which are essential for shaping metal sheets. Several metal bending tools or dies are stored vertically in a dedicated rack, including a tool labeled with specifications such as "WILA EQUIPUR 515 16X30° R15 H-55 13.5 kN max 550 kN/m," indicating the type and capacity of the tooling available.
The control panel features a screen and keypad labeled "CYBELEC DNC 76," though the screen shows reflections and smudges, and some keypad labels are worn with handwritten numbers on tape. The bending die and clamping system exhibit some rust and dirt on metal surfaces, indicating signs of wear.
Additionally, a hand tool, likely a protractor, is attached to the right blue column of the machine, which may assist in angle measurements during setup. Overall, this Blemas CNC press brake offers robust capabilities with a range of tooling options, though it shows typical signs of use and wear consistent with its age.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Technical details
CNC Press Brake
Manufacturer: Blemas
Type: 100-33
Year of Manufacture: 1994
CNC Control: Cybelec DNC 74 PSG
Pressing Force: 100 tons
Working Width: 3 m
Weight approx.: 8 tons
Dimensions approx.: 3.600 x 1.600 x 2.600 mm
Reference No.: H2160
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2017 |
| Offers online | 96 |
| Last activity | May 17, 2026 |
Technical details
CNC Press Brake
Manufacturer: Blemas
Type: 100-33
Year of Manufacture: 1994
CNC Control: Cybelec DNC 74 PSG
Pressing Force: 100 tons
Working Width: 3 m
Weight approx.: 8 tons
Dimensions approx.: 3.600 x 1.600 x 2.600 mm
Reference No.: H2160
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Strength | 100 T |
| Folding length | mm |
| Distance between uprights | mm |
| CNC | |
| Throat | mm |
| Vertical stroke | mm |
| Working speed | mm/s |
| Axis number | |
| Engine Power | kW |
| Hole | |
| ------------------- | |
| Length x width x height | - × - × - |
| Weight | kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 06/05/2026 |
This CNC press brake is manufactured by Blemas, model 100-33, and was produced in 1994. It features a pressing force of 100 tons and a working width of 3 meters, making it suitable for a variety of metal bending tasks. The machine is equipped with a Cybelec DNC 74 PSG CNC control system, providing precise and programmable control over bending operations.
The press brake has an approximate weight of 8 tons and overall dimensions of about 3,600 mm in length, 1,600 mm in width, and 2,600 mm in height. The machine's body is primarily blue and white, with visible yellow safety guards installed on the sides to enhance operator safety during use.
The working area includes metal bending dies and clamping components, which are essential for shaping metal sheets. Several metal bending tools or dies are stored vertically in a dedicated rack, including a tool labeled with specifications such as "WILA EQUIPUR 515 16X30° R15 H-55 13.5 kN max 550 kN/m," indicating the type and capacity of the tooling available.
The control panel features a screen and keypad labeled "CYBELEC DNC 76," though the screen shows reflections and smudges, and some keypad labels are worn with handwritten numbers on tape. The bending die and clamping system exhibit some rust and dirt on metal surfaces, indicating signs of wear.
Additionally, a hand tool, likely a protractor, is attached to the right blue column of the machine, which may assist in angle measurements during setup. Overall, this Blemas CNC press brake offers robust capabilities with a range of tooling options, though it shows typical signs of use and wear consistent with its age.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2017 |
| Offers online | 96 |
| Last activity | May 17, 2026 |
CNC хидравлична преса BLEMAS 100-33
Ohýbačka CNC BLEMAS 100-33
BLEMAS 100-33 CNC buksepresse
CNC Abkantpresse BLEMAS 100-33
Πρέσα κάμψης CNC BLEMAS 100-33
BLEMAS 100-33 CNC press brake
Prensa plegadora CNC BLEMAS 100-33
Presse plieuse CNC BLEMAS 100-33
CNC preša za savijanje BLEMAS 100-33
BLEMAS 100-33 CNC hajlítóprés
Piegatrice CNC BLEMAS 100-33
BLEMAS 100-33 CNC presas
BLEMAS 100-33 CNC kantpers
Hydrauliczne giętarka CNC BLEMAS 100-33
Dobradeira CNC BLEMAS 100-33
Presă de îndoit CNC BLEMAS 100-33
Гибочный пресс с ЧПУ BLEMAS 100-33
CNC presa za savijanje BLEMAS 100-33
BLEMAS 100-33 CNC pressbroms
BLEMAS 100-33 CNC pres bükme makinesi
EN
- Languages
English (GB)