Price on request
Make an offer| Turning length | 1330 mm |
| Turning Ø | 410 mm |
| Ø above the bed | 700 mm |
| Type of CNC | |
| X-axis | 255 mm |
| Z-axis | 1315 mm |
| Spindle taper | |
| Spindle bore | 111 mm |
| Turning speed | 2400 rpm |
| Spindle motor power | 30 kW |
| Tailstock | no |
| Bar feeder | no |
| ------------------- | |
| Length x width x height | 5100.0 × 2000.0 × 2100.0 |
| Weight | 7250 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 18/05/2026 |
Category
Lathe
Type
CNC
Brand
BIGLIA
Model
B1200Y
Capacity
ø102.5/410 x 1330 mm ø4.04/16.14 x 52.36 in
Year of manufacture
2010
Technical Specifications
Convert to Metric Imperial
WORKING RANGE
Tool capacity
102.5 mm 4.04 in
Max workpiece diameter (re-machining)
410 mm 16.14 in
Tool section
1330 mm 52.36 in
Max turning diameter on bed
700 mm 27.56 in
CNC
CNC
Fanuc 18i-TB
Notes
Manual Guide, SBS, Renishaw RP3
MAIN SPINDLE
Max. spindle speed
2400 rpm
Spindle nose
ASA 8”
Spindle bore
111 mm 4.37 in
Inner bearing diameter
150 mm5.91 in
Self-centering diameter
315 (three jaws, 122 mm bore) mm12.40 (three jaws, 4.80 in bore) in
Max power
30 kW
Max torque
776 Nm
C-axis resolution
0.001°
C-axis speed
100 rpm
TAILSTOCK
Spindle diameter
115 mm4.53 in
Spindle stroke
150 mm5.91 in
Cone
CM5
B-axis stroke
1200 mm47.24 in
TURRET 1
Number of positions
12
Rotation time (1 pos)
0.15 sec.
Number of motorized positions
12
Motorized tool speed
4000 rpm
Motorized tool power
5.5 kW
X1 axis stroke
255 mm (10.04 in)
X1 axis rapid traverse
20 m/min (787.40 ipm)
Z1 axis stroke
1315 mm (51.77 in)
Z1 axis rapid traverse
24 m/min 944.88 ipm
Y1 axis travel
110 (+60/-50) mm 4.33 (+2.36/-1.97) in
Y1 axis rapid traverse
7.5 m/min 295.28 ipm
Motorized tool torque
70 Nm
EXTRA
Carriage
Morari hydraulic "following" tailstock carriage, ø250 mm
Total machine weight
7250 kg
Machine dimensions
5100x2000x2100 mm200.79x78.74x82.68 in
Chip conveyor
yes
Self-centering
SMW Autoblok 315mm - complete pneumatic system to control a pneumatic self-centering device Complete pneumatic system to control a pneumatic self-centering device with full-stroke cylinder. Always use functions M24-M25 by enabling the full-stroke cylinder. Always use functions M24-M25 by enabling the pneumatic system with Keep relay (see Electrical Manual 1)
Motorized tool holders
available
Fixed tool holders
available
Hydraulic tailstock
Morari hydraulic tailstock ø0-250mm
Notes
bar feeder provision, automatic workpiece unloader ø100x150mm, 18-bar pump with filter,
The data provided is based on the information in our possession, obtained from manufacturers where possible; therefore, despite our best efforts, due to the nature and complexity of the equipment, such data may be incomplete and/or inaccurate, and under no circumstances can its accuracy be guaranteed or constitute any contractual obligation. We always recommend inspecting the equipment and requesting confirmation of the data.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2007 |
| Offers online | 118 |
| Last activity | May 21, 2026 |
GAMBA GIOVANNI S.R.L., known by its brand Gamba Macchine, is a trusted Italian company with over 70 years of experience in the machine tool industry. Based in Gardone Val Trompia in the heart of Italy’s industrial region, the company specializes in the sale of high-quality new and used metalworking machinery for chip removal processes.
Founded in 1950 by Giovanni Gamba, the company has grown into a reference point for precision and reliability in the European industrial market. Today, it is managed by the second and third generations of the Gamba family who continue to uphold a strong tradition of technical expertise and customer-oriented service.
Gamba Macchine operates from two strategic locations in the province of Brescia, offering a wide range of machinery from leading international manufacturers. Their deep knowledge of production processes allows them to assist clients in finding the most suitable and efficient solutions for their machining needs.
With a strong focus on quality, performance, and after-sales support, Gamba Macchine is the ideal partner for companies looking to invest in reliable and cost-effective metalworking solutions. Whether you need a single machine or a complete production line, Gamba Macchine delivers value, expertise, and confidence.
Category
Lathe
Type
CNC
Brand
BIGLIA
Model
B1200Y
Capacity
ø102.5/410 x 1330 mm ø4.04/16.14 x 52.36 in
Year of manufacture
2010
Technical Specifications
Convert to Metric Imperial
WORKING RANGE
Tool capacity
102.5 mm 4.04 in
Max workpiece diameter (re-machining)
410 mm 16.14 in
Tool section
1330 mm 52.36 in
Max turning diameter on bed
700 mm 27.56 in
CNC
CNC
Fanuc 18i-TB
Notes
Manual Guide, SBS, Renishaw RP3
MAIN SPINDLE
Max. spindle speed
2400 rpm
Spindle nose
ASA 8”
Spindle bore
111 mm 4.37 in
Inner bearing diameter
150 mm5.91 in
Self-centering diameter
315 (three jaws, 122 mm bore) mm12.40 (three jaws, 4.80 in bore) in
Max power
30 kW
Max torque
776 Nm
C-axis resolution
0.001°
C-axis speed
100 rpm
TAILSTOCK
Spindle diameter
115 mm4.53 in
Spindle stroke
150 mm5.91 in
Cone
CM5
B-axis stroke
1200 mm47.24 in
TURRET 1
Number of positions
12
Rotation time (1 pos)
0.15 sec.
Number of motorized positions
12
Motorized tool speed
4000 rpm
Motorized tool power
5.5 kW
X1 axis stroke
255 mm (10.04 in)
X1 axis rapid traverse
20 m/min (787.40 ipm)
Z1 axis stroke
1315 mm (51.77 in)
Z1 axis rapid traverse
24 m/min 944.88 ipm
Y1 axis travel
110 (+60/-50) mm 4.33 (+2.36/-1.97) in
Y1 axis rapid traverse
7.5 m/min 295.28 ipm
Motorized tool torque
70 Nm
EXTRA
Carriage
Morari hydraulic "following" tailstock carriage, ø250 mm
Total machine weight
7250 kg
Machine dimensions
5100x2000x2100 mm200.79x78.74x82.68 in
Chip conveyor
yes
Self-centering
SMW Autoblok 315mm - complete pneumatic system to control a pneumatic self-centering device Complete pneumatic system to control a pneumatic self-centering device with full-stroke cylinder. Always use functions M24-M25 by enabling the full-stroke cylinder. Always use functions M24-M25 by enabling the pneumatic system with Keep relay (see Electrical Manual 1)
Motorized tool holders
available
Fixed tool holders
available
Hydraulic tailstock
Morari hydraulic tailstock ø0-250mm
Notes
bar feeder provision, automatic workpiece unloader ø100x150mm, 18-bar pump with filter,
The data provided is based on the information in our possession, obtained from manufacturers where possible; therefore, despite our best efforts, due to the nature and complexity of the equipment, such data may be incomplete and/or inaccurate, and under no circumstances can its accuracy be guaranteed or constitute any contractual obligation. We always recommend inspecting the equipment and requesting confirmation of the data.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Turning length | 1330 mm |
| Turning Ø | 410 mm |
| Ø above the bed | 700 mm |
| Type of CNC | |
| X-axis | 255 mm |
| Z-axis | 1315 mm |
| Spindle taper | |
| Spindle bore | 111 mm |
| Turning speed | 2400 rpm |
| Spindle motor power | 30 kW |
| Tailstock | no |
| Bar feeder | no |
| ------------------- | |
| Length x width x height | 5100.0 × 2000.0 × 2100.0 |
| Weight | 7250 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 18/05/2026 |
| Client type | Machinery dealer |
| Active since | 2007 |
| Offers online | 118 |
| Last activity | May 21, 2026 |
GAMBA GIOVANNI S.R.L., known by its brand Gamba Macchine, is a trusted Italian company with over 70 years of experience in the machine tool industry. Based in Gardone Val Trompia in the heart of Italy’s industrial region, the company specializes in the sale of high-quality new and used metalworking machinery for chip removal processes.
Founded in 1950 by Giovanni Gamba, the company has grown into a reference point for precision and reliability in the European industrial market. Today, it is managed by the second and third generations of the Gamba family who continue to uphold a strong tradition of technical expertise and customer-oriented service.
Gamba Macchine operates from two strategic locations in the province of Brescia, offering a wide range of machinery from leading international manufacturers. Their deep knowledge of production processes allows them to assist clients in finding the most suitable and efficient solutions for their machining needs.
With a strong focus on quality, performance, and after-sales support, Gamba Macchine is the ideal partner for companies looking to invest in reliable and cost-effective metalworking solutions. Whether you need a single machine or a complete production line, Gamba Macchine delivers value, expertise, and confidence.
CNC струг BIGLIA B1200Y
CNC soustruh BIGLIA B1200Y
BIGLIA B1200Y CNC-drejebænk
BIGLIA B1200Y CNC-Drehmaschine
Τόρνος CNC BIGLIA B1200Y
BIGLIA B1200Y CNC lathe
Torno CNC BIGLIA B1200Y
Tour CNC BIGLIA B1200Y
CNC tokarski stroj BIGLIA B1200Y
BIGLIA B1200Y CNC esztergagép
Tornio CNC BIGLIA B1200Y
BIGLIA B1200Y CNC tekinimo staklės
BIGLIA B1200Y CNC-draaibank
Tokarka CNC BIGLIA B1200Y
Torno CNC BIGLIA B1200Y
Strung CNC BIGLIA B1200Y
BIGLIA B1200Y Токарный станок с ЧПУ
CNC strug BIGLIA B1200Y
BIGLIA B1200Y CNC-svarv
CNC torna BIGLIA B1200Y
EN
- Languages
English (GB)