Price on request
Make an offer| Capacity | 10 T |
| Ram stroke | 1000 mm |
| Nbr of strokes/min | 80 |
| Engine Power | 105 kW |
| ------------------- | |
| Weight | 50000 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Beche DG10H |
| Last availability date | 02/04/2026 |
This Beche DG10H blowmoulding machine is designed for industrial applications requiring robust forging capabilities. It has a forging capacity of 10 tons with an energy of blow rated at 10,000 kg. The machine features a stroke length of 1000 mm and a distance between columns of 800 mm, allowing for substantial material handling and processing. It can achieve a maximum blow frequency of 80 blows per minute, with an average operational rate of around 10 blows per minute. Air consumption per blow is approximately 1.6 units, supported by a compressor output of 16 ebm initial volume per minute under cold air operation at 7 atm pressure. The power requirement for the compressor is 105 PS horsepower at the same pressure. The machine is equipped with 14 air collectors and utilizes steam consumption of 0.85 kg per blow at 7 atm for the strongest blow, with a total steam consumption of 8.5 kg per minute. Structurally, the machine stands 4500 mm tall and weighs approximately 50 tons. Visually, the machine has a large green industrial frame with visible hydraulic components and metal rods secured by bolts on both sides. A lever is present on the front left side, and a yellow label marked 'BHG' is attached to the right side. The machine shows signs of rust on several metal parts and bolts, indicating some wear consistent with industrial use. This equipment is suitable for heavy-duty forging and blowmoulding operations where high capacity and reliability are required.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Item Title: Beche DG10H Forging Hammer
Manufacturer: Beche
Model: DG10H
Capacity: 10 tons
Energy of Blow: 10000 kg
Stroke: 1000 mm
Distance Between Columns: 800 mm
Maximum Number of Blows per Minute: 80
Average Number of Blows per Minute: 10
Air Consumption per Blow: 1.6
Compressor Output (Initial Volume per Minute with Cold Air Operation): 16 ebm
Power Requirement of the Compressor (HP at 7 atm): 105 PS
Air Collectors: 14 ebm
Steam Consumption per Blow at 7 atm (Strongest Blow): 0.85 kg
Steam Consumption per Minute: 8.5 kg
Height: 4500 mm
Weight: 50 tons
Item Condition: Good Condition
Technical Condition: As-is, where-is
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 13, 2026 |
Item Title: Beche DG10H Forging Hammer
Manufacturer: Beche
Model: DG10H
Capacity: 10 tons
Energy of Blow: 10000 kg
Stroke: 1000 mm
Distance Between Columns: 800 mm
Maximum Number of Blows per Minute: 80
Average Number of Blows per Minute: 10
Air Consumption per Blow: 1.6
Compressor Output (Initial Volume per Minute with Cold Air Operation): 16 ebm
Power Requirement of the Compressor (HP at 7 atm): 105 PS
Air Collectors: 14 ebm
Steam Consumption per Blow at 7 atm (Strongest Blow): 0.85 kg
Steam Consumption per Minute: 8.5 kg
Height: 4500 mm
Weight: 50 tons
Item Condition: Good Condition
Technical Condition: As-is, where-is
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Capacity | 10 T |
| Ram stroke | 1000 mm |
| Nbr of strokes/min | 80 |
| Engine Power | 105 kW |
| ------------------- | |
| Weight | 50000 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Beche DG10H |
| Last availability date | 02/04/2026 |
This Beche DG10H blowmoulding machine is designed for industrial applications requiring robust forging capabilities. It has a forging capacity of 10 tons with an energy of blow rated at 10,000 kg. The machine features a stroke length of 1000 mm and a distance between columns of 800 mm, allowing for substantial material handling and processing. It can achieve a maximum blow frequency of 80 blows per minute, with an average operational rate of around 10 blows per minute. Air consumption per blow is approximately 1.6 units, supported by a compressor output of 16 ebm initial volume per minute under cold air operation at 7 atm pressure. The power requirement for the compressor is 105 PS horsepower at the same pressure. The machine is equipped with 14 air collectors and utilizes steam consumption of 0.85 kg per blow at 7 atm for the strongest blow, with a total steam consumption of 8.5 kg per minute. Structurally, the machine stands 4500 mm tall and weighs approximately 50 tons. Visually, the machine has a large green industrial frame with visible hydraulic components and metal rods secured by bolts on both sides. A lever is present on the front left side, and a yellow label marked 'BHG' is attached to the right side. The machine shows signs of rust on several metal parts and bolts, indicating some wear consistent with industrial use. This equipment is suitable for heavy-duty forging and blowmoulding operations where high capacity and reliability are required.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 13, 2026 |
Ковашки чук Beche DG10H
Kovací buchar Beche DG10H
Beche DG10H Smedehammer
Beche DG10H Schmiedehammer
Σφυρί σφυρηλάτησης Beche DG10H
Beche DG10H Forging hammer
Martillo pilón Beche DG10H
Marteau-pilon Beche DG10H
Kovački čekić Beche DG10H
Beche DG10H Kovácskalapács
Maglio Beche DG10H
Beche DG10H Kalimo kūjis
Beche DG10H Smeedhamer
Młot kuźniczy Beche DG10H
Martelo de forja Beche DG10H
Ciocan de forjare Beche DG10H
Beche DG10H Кузнечный молот
Kovački čekić Beche DG10H
Beche DG10H Smideshammare
Dövme şahmerdanı Beche DG10H
EN
- Languages
English (GB)