Price on request
Make an offer| Capacity | T |
| Ram stroke | 1250 mm |
| Type | |
| Nbr of strokes/min | |
| Engine Power | kW |
| ------------------- | |
| Length x width x height | - × - × 6200.0 |
| Weight | 235 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Beche DCH40 |
| Last availability date | 02/04/2026 |
This Beche DCH40 forging hammer is a heavy-duty industrial machine designed for high-capacity forging operations. It features a total hammer stroke of 1250 mm and a maximum capacity of 40 tons, suitable for substantial forging tasks. The hammer is capable of delivering up to 80 blows per minute at maximum speed, with an average operational speed of around 6 blows per minute. The machine requires significant air and steam consumption for operation, with air consumption per blow at 6.8 m³ of delivered air at the strongest blow, and steam consumption of 3.5 kg per blow, totaling 210 kg per minute.
The forging hammer has a clearance between the guides of 1200 mm and can accommodate maximum die lengths of up to 2700 mm. Its lowest overall die height without dovetail is 575 mm, and the overall height above ground is 6200 mm. The total weight of the machine with a cast steel frame is approximately 235 kg. It is also equipped to handle a manipulator with a capacity of 1.5 tons.
The machine is painted green and shows signs of use, including dust accumulation and some wear on the frame and components. Key visible components include the central hammer block and base, hydraulic or pneumatic cylinders with red caps on both sides, metal rods and structural supports on the sides, and hydraulic hoses and control valves. The hammer block is positioned above metal rails used for workpiece placement, and a hydraulic pump and motor assembly are mounted on the frame. The frame and structural elements show some paint chipping and wear consistent with used industrial equipment.
This forging hammer is suitable for industrial forging applications requiring a robust and high-capacity hammering solution. Its condition reflects regular use but appears structurally sound with all major components present.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Forging Equipment
Capacity : 40 tons,
Impact energy : 40000 mkg,
Total hammer stroke : 1250 mm,
Max. number of blows : 80 per minutes,
Average number of blows : 6 per minutes,
Air consumption per blow in m3 of delivered air at the strongest blow : 6.8,
Compressor output in m3/min delivered air pressure cold air : 41,
Hot air(160 C) : 27,
Compressor power requirement in HP cold air : 260,
Compressor power requirement in HP hot air : 185,
Steam consumption per blow at strongest blow (Samdampti) : 3.5 kg,
Steam consumption per minute (steam) : 210 kg,
Clearance between the guides : 1200 mm,
Max. die lengths : 2700 mm,
Lowest overall die height without dovetail : 575 mm,
Overall height above ground : 6200 mm,
Total weight with frame made of the sheet metal : 215,
Total weight with frame made of cast steel : 235,
With Manipulator 1.5 tons.
Item Condition: Good condition
Capacity Tons: 40
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 13, 2026 |
Forging Equipment
Capacity : 40 tons,
Impact energy : 40000 mkg,
Total hammer stroke : 1250 mm,
Max. number of blows : 80 per minutes,
Average number of blows : 6 per minutes,
Air consumption per blow in m3 of delivered air at the strongest blow : 6.8,
Compressor output in m3/min delivered air pressure cold air : 41,
Hot air(160 C) : 27,
Compressor power requirement in HP cold air : 260,
Compressor power requirement in HP hot air : 185,
Steam consumption per blow at strongest blow (Samdampti) : 3.5 kg,
Steam consumption per minute (steam) : 210 kg,
Clearance between the guides : 1200 mm,
Max. die lengths : 2700 mm,
Lowest overall die height without dovetail : 575 mm,
Overall height above ground : 6200 mm,
Total weight with frame made of the sheet metal : 215,
Total weight with frame made of cast steel : 235,
With Manipulator 1.5 tons.
Item Condition: Good condition
Capacity Tons: 40
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Capacity | T |
| Ram stroke | 1250 mm |
| Type | |
| Nbr of strokes/min | |
| Engine Power | kW |
| ------------------- | |
| Length x width x height | - × - × 6200.0 |
| Weight | 235 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Beche DCH40 |
| Last availability date | 02/04/2026 |
This Beche DCH40 forging hammer is a heavy-duty industrial machine designed for high-capacity forging operations. It features a total hammer stroke of 1250 mm and a maximum capacity of 40 tons, suitable for substantial forging tasks. The hammer is capable of delivering up to 80 blows per minute at maximum speed, with an average operational speed of around 6 blows per minute. The machine requires significant air and steam consumption for operation, with air consumption per blow at 6.8 m³ of delivered air at the strongest blow, and steam consumption of 3.5 kg per blow, totaling 210 kg per minute.
The forging hammer has a clearance between the guides of 1200 mm and can accommodate maximum die lengths of up to 2700 mm. Its lowest overall die height without dovetail is 575 mm, and the overall height above ground is 6200 mm. The total weight of the machine with a cast steel frame is approximately 235 kg. It is also equipped to handle a manipulator with a capacity of 1.5 tons.
The machine is painted green and shows signs of use, including dust accumulation and some wear on the frame and components. Key visible components include the central hammer block and base, hydraulic or pneumatic cylinders with red caps on both sides, metal rods and structural supports on the sides, and hydraulic hoses and control valves. The hammer block is positioned above metal rails used for workpiece placement, and a hydraulic pump and motor assembly are mounted on the frame. The frame and structural elements show some paint chipping and wear consistent with used industrial equipment.
This forging hammer is suitable for industrial forging applications requiring a robust and high-capacity hammering solution. Its condition reflects regular use but appears structurally sound with all major components present.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 13, 2026 |
Ковашки чук Beche DCH40
Kovací buchar Beche DCH40
Beche DCH40 Smedehammer
Beche DCH40 Schmiedehammer
Σφυρί σφυρηλάτησης Beche DCH40
Beche DCH40 Forging hammer
Martillo pilón Beche DCH40
Marteau-pilon Beche DCH40
Kovački čekić Beche DCH40
Beche DCH40 Kovácskalapács
Maglio Beche DCH40
Beche DCH40 Kalimo kūjis
Beche DCH40 Smeedhamer
Młot kuźniczy Beche DCH40
Martelo de forja Beche DCH40
Ciocan de forjare Beche DCH40
Beche DCH40 Кузнечный молот
Kovački čekić Beche DCH40
Beche DCH40 Smideshammare
Dövme şahmerdanı Beche DCH40
EN
- Languages
English (GB)