This ARBURG Allrounder 570 H 2000-1300 HIDRIVE Injection Moulding Machine was manufactured in 2014 in Germany. It has a clamping force of 2000 kN and is equipped with thermoplastic cylinder of 60mm with long barrier screw (open nozzle 60 mm, nozzle tip radius 15, heating tape for open nozzle). In addition it features a servoelectric mold height adjustment with automatic clamping force control, a central clamping platen set Ø 125 mm, a maximum installation dimension increased to 650 mm and injection pressure increased by 10% (max. 2500 bar depending on screw). See overview of full configuration attached as PDF (DE) below.

CNC: ARBURG SELOGICA direct
Screw diameter: 60 mm
Shot weight: 620 (PS)
Stroke volume: 678
Injection pressure: 2500 (increased)
Heating capacity: 22.9 kW
Adjustable heating zones: 8
Clamping force: 2000 kN
Opening stroke: 450 mm
Max open daylight: 1000 mm
Distance between bars: 570 x 570 mm
Mould height min: 250 mm
Mould height max: 650 mm
Size of mold platens: 795 x 795 mm
Ejector force for / back: 60 kN
Equipment package Extended monitoring
Equipment package Extended travel movements
Equipment package Production control
Equipment package Optimization/ operating aids
Equipment package Quality assurance
Documentation equipment package

Reinforced screw coupling - coupling geometry multi-tooth
Thermoplastic cylinder 60 mm long with barrier screw
Drive unit with 30 kw motor and 61. 11/min loading volume flow
Technology level storage drive // thermoplastic processing
Open nozzle 60 mm // nozzle tip radius 15 // heating band for open nozzle
Central clamping platen set Ø 125 mm
Maximum installation dimension increased to 650 mm
Ejector pressure p /q controlled
Continuous oil cooling and filtration
Robot system interface (to euromap 67)
Injection unit adapted for long plasticizing units
Servoelectric mold height adjustment with automatic clamping force control
Injection pressure increased by 10%; screw-dependent max. 2500 bar
Nozzle contact force regulated
12 electrical heating control circuits for mold heating
Freely programmable ramps for hydraulic ejector
Water-cooled switch cabinet
Machine protection designed for operation with and without multi lift
Low-current switch cabinet 800 x 80050-pin Extension robot interface (Euromap 12 and 67) F9264, 4 programmable inputs/outputs on terminal strip, Socket outlet vert. 1 CEE, 1 Schuko additional, Cutting unit Temperature control unit WKZ 20 mA, Printer interface serial USB, Compact Flash interface for data record storage, Operating authorization with chip card according to EUROMAP 65, Holder for PC keyboard with USB connection, Acoustic fault display, AED - electrom. Dosing drive, Interface Protection of the safety fence door (EUROMAP 73), Parallel connection for heating tape Nozzle tip or adapter, Approach parameters, Interface coloring unit, Shut-off valve for cooling water in feed 1, Elevated oscillating elements (100 mm machine elevation), Machine-related cooling circuits controlled, aXw Control ScrewPilot , CD Operating instructions and spare parts list , Without granulate container 50 L, Without cooling water distribution for mold, Ejector plate connection Safety device, Socket outlet vert. 1 CEE,1 Schuko, Control extension for special signals, Machine in special paint finish

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Clamping force 200 T
Screw diameter 60 mm
Tie bar spacing (H) 570 mm
Tie bar spacing (V) 570 mm
Shot volume 678 cm³
Shot weight 620 g
Pressure on material 2500 bar
Platen length 795 mm
Platen width 795 mm
Robot interface Euromap 67
Number of heating zones 8
Opening of the press 450 mm
Mould size 250/650
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status
Client type Reseller
Active since 2019
Offers online 947
Last activity March 28, 2024

Description

This ARBURG Allrounder 570 H 2000-1300 HIDRIVE Injection Moulding Machine was manufactured in 2014 in Germany. It has a clamping force of 2000 kN and is equipped with thermoplastic cylinder of 60mm with long barrier screw (open nozzle 60 mm, nozzle tip radius 15, heating tape for open nozzle). In addition it features a servoelectric mold height adjustment with automatic clamping force control, a central clamping platen set Ø 125 mm, a maximum installation dimension increased to 650 mm and injection pressure increased by 10% (max. 2500 bar depending on screw). See overview of full configuration attached as PDF (DE) below.

CNC: ARBURG SELOGICA direct
Screw diameter: 60 mm
Shot weight: 620 (PS)
Stroke volume: 678
Injection pressure: 2500 (increased)
Heating capacity: 22.9 kW
Adjustable heating zones: 8
Clamping force: 2000 kN
Opening stroke: 450 mm
Max open daylight: 1000 mm
Distance between bars: 570 x 570 mm
Mould height min: 250 mm
Mould height max: 650 mm
Size of mold platens: 795 x 795 mm
Ejector force for / back: 60 kN
Equipment package Extended monitoring
Equipment package Extended travel movements
Equipment package Production control
Equipment package Optimization/ operating aids
Equipment package Quality assurance
Documentation equipment package

Reinforced screw coupling - coupling geometry multi-tooth
Thermoplastic cylinder 60 mm long with barrier screw
Drive unit with 30 kw motor and 61. 11/min loading volume flow
Technology level storage drive // thermoplastic processing
Open nozzle 60 mm // nozzle tip radius 15 // heating band for open nozzle
Central clamping platen set Ø 125 mm
Maximum installation dimension increased to 650 mm
Ejector pressure p /q controlled
Continuous oil cooling and filtration
Robot system interface (to euromap 67)
Injection unit adapted for long plasticizing units
Servoelectric mold height adjustment with automatic clamping force control
Injection pressure increased by 10%; screw-dependent max. 2500 bar
Nozzle contact force regulated
12 electrical heating control circuits for mold heating
Freely programmable ramps for hydraulic ejector
Water-cooled switch cabinet
Machine protection designed for operation with and without multi lift
Low-current switch cabinet 800 x 80050-pin Extension robot interface (Euromap 12 and 67) F9264, 4 programmable inputs/outputs on terminal strip, Socket outlet vert. 1 CEE, 1 Schuko additional, Cutting unit Temperature control unit WKZ 20 mA, Printer interface serial USB, Compact Flash interface for data record storage, Operating authorization with chip card according to EUROMAP 65, Holder for PC keyboard with USB connection, Acoustic fault display, AED - electrom. Dosing drive, Interface Protection of the safety fence door (EUROMAP 73), Parallel connection for heating tape Nozzle tip or adapter, Approach parameters, Interface coloring unit, Shut-off valve for cooling water in feed 1, Elevated oscillating elements (100 mm machine elevation), Machine-related cooling circuits controlled, aXw Control ScrewPilot , CD Operating instructions and spare parts list , Without granulate container 50 L, Without cooling water distribution for mold, Ejector plate connection Safety device, Socket outlet vert. 1 CEE,1 Schuko, Control extension for special signals, Machine in special paint finish

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Clamping force 200 T
Screw diameter 60 mm
Tie bar spacing (H) 570 mm
Tie bar spacing (V) 570 mm
Shot volume 678 cm³
Shot weight 620 g
Pressure on material 2500 bar
Platen length 795 mm
Platen width 795 mm
Robot interface Euromap 67
Number of heating zones 8
Opening of the press 450 mm
Mould size 250/650
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2019
Offers online 947
Last activity March 28, 2024

Here is a selection of similar machines

Arburg Allrounder 570 H 2000-1300 Injection moulding machine