Price on request
Make an offer| Power in tons | 160 T |
| Table length | 630 mm |
| Table width | 630 mm |
| Ram stroke | 160 mm |
| Nbr of strokes/min | 50 |
| Engine Power | 33.5 kW |
| ------------------- | |
| Length x width x height | 2220.0 × 1490.0 × 3622.0 |
| Weight | 12100 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 02/04/2026 |
This listing features a Barnaul, Russia KB0032 cold forging machine designed for industrial metal forming applications. The machine has a pressing capacity of 160 tons, supported by a ram stroke of 160 mm and a maximum stroke rate of 50 strokes per minute. The bolster plate measures 630 mm by 630 mm, providing a stable working surface for forging operations.
The machine's shut height is 435 mm, with a bolster plate to ram adjustment range of 16 mm. It includes both upper and lower knockout mechanisms: the lower knockout stroke is 90 mm with a capacity of 200 tons, while the upper knockout stroke is 10 mm with a capacity of 63 tons. The ram stroke to lower dead center at nominal force is 22 mm.
The main drive motor delivers 33.5 kW of power, ensuring sufficient energy for demanding forging tasks. The machine's overall dimensions are 2220 mm in length, 1490 mm in width, and 3622 mm in height, with a total weight of approximately 12,100 kg (12.1 tons).
Visually, the machine exhibits signs of use, including worn and chipped yellow and green paint, dirt accumulation, and some surface rust. It is equipped with a motor mounted on the top left side and features a front panel with a circular dial and various control elements. Protective guards are present in front of the pressing area to enhance safety during operation. The structural frame is robust, including large bolts and reinforcements around the pressing zone. Several cables and hydraulic or pneumatic lines are connected near the pressing area, supporting its operational functions.
Additional components include a metal table or support structure in front of the machine and an attached green storage or control box nearby. The underside reveals mechanical drives, support columns, a splined shaft, and large securing bolts, with some oil or grease residue visible on metal surfaces.
This cold forging machine is offered in as-is, where-is condition, reflecting its current state without guarantees on operational status.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Item Title: Barnaul, Russia KB0032 Cold Forging Machine
Manufacturer: Barnaul, Russia
Model: KB0032
Capacity: 160 tons
Ram Stroke: 160 mm
Strokes per Minute: 50
Bolster Plate to Ram Adjustment: 16 mm
Ram Stroke to Lower Dead Center at Nominal Force: 22 mm
Shut Height: 435 mm
Lower Knockout Stroke: 90 mm
Lower Knockout Capacity: 200 tons
Upper Knockout Stroke: 10 mm
Upper Knockout Capacity: 63 tons
Bed Dimensions: 630 x 630 mm
Machine Dimensions: 2220 x 1490 x 3622 mm
Main Drive Motor Power: 33.5 kW
Height Above Floor Level: 3622 mm
Machine Weight: 12.1 tons
Item Condition: Good condition
Technical Condition: As-is, where-is
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 19, 2026 |
Item Title: Barnaul, Russia KB0032 Cold Forging Machine
Manufacturer: Barnaul, Russia
Model: KB0032
Capacity: 160 tons
Ram Stroke: 160 mm
Strokes per Minute: 50
Bolster Plate to Ram Adjustment: 16 mm
Ram Stroke to Lower Dead Center at Nominal Force: 22 mm
Shut Height: 435 mm
Lower Knockout Stroke: 90 mm
Lower Knockout Capacity: 200 tons
Upper Knockout Stroke: 10 mm
Upper Knockout Capacity: 63 tons
Bed Dimensions: 630 x 630 mm
Machine Dimensions: 2220 x 1490 x 3622 mm
Main Drive Motor Power: 33.5 kW
Height Above Floor Level: 3622 mm
Machine Weight: 12.1 tons
Item Condition: Good condition
Technical Condition: As-is, where-is
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Power in tons | 160 T |
| Table length | 630 mm |
| Table width | 630 mm |
| Ram stroke | 160 mm |
| Nbr of strokes/min | 50 |
| Engine Power | 33.5 kW |
| ------------------- | |
| Length x width x height | 2220.0 × 1490.0 × 3622.0 |
| Weight | 12100 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 02/04/2026 |
This listing features a Barnaul, Russia KB0032 cold forging machine designed for industrial metal forming applications. The machine has a pressing capacity of 160 tons, supported by a ram stroke of 160 mm and a maximum stroke rate of 50 strokes per minute. The bolster plate measures 630 mm by 630 mm, providing a stable working surface for forging operations.
The machine's shut height is 435 mm, with a bolster plate to ram adjustment range of 16 mm. It includes both upper and lower knockout mechanisms: the lower knockout stroke is 90 mm with a capacity of 200 tons, while the upper knockout stroke is 10 mm with a capacity of 63 tons. The ram stroke to lower dead center at nominal force is 22 mm.
The main drive motor delivers 33.5 kW of power, ensuring sufficient energy for demanding forging tasks. The machine's overall dimensions are 2220 mm in length, 1490 mm in width, and 3622 mm in height, with a total weight of approximately 12,100 kg (12.1 tons).
Visually, the machine exhibits signs of use, including worn and chipped yellow and green paint, dirt accumulation, and some surface rust. It is equipped with a motor mounted on the top left side and features a front panel with a circular dial and various control elements. Protective guards are present in front of the pressing area to enhance safety during operation. The structural frame is robust, including large bolts and reinforcements around the pressing zone. Several cables and hydraulic or pneumatic lines are connected near the pressing area, supporting its operational functions.
Additional components include a metal table or support structure in front of the machine and an attached green storage or control box nearby. The underside reveals mechanical drives, support columns, a splined shaft, and large securing bolts, with some oil or grease residue visible on metal surfaces.
This cold forging machine is offered in as-is, where-is condition, reflecting its current state without guarantees on operational status.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 19, 2026 |
Преса за студено обемно щамповане Barnaul, Russia KB0032
Kovací lis za studena Barnaul, Russia KB0032
Barnaul, Russia KB0032 Koldsmedepresse
Barnaul, Russia KB0032 Kaltumformpresse
Πρέσα ψυχρής σφυρηλάτησης Barnaul, Russia KB0032
Barnaul, Russia KB0032 Cold forging machine
Prensa de forja en frío Barnaul, Russia KB0032
Presse de forge à froid Barnaul, Russia KB0032
Preša za hladno kovanje Barnaul, Russia KB0032
Barnaul, Russia KB0032 Hidegalakító prés
Pressa per forgiatura a freddo Barnaul, Russia KB0032
Barnaul, Russia KB0032 Šaltojo tūrinio kalimo presas
Barnaul, Russia KB0032 Koudomvormpers
Prasa do kucia na zimno Barnaul, Russia KB0032
Prensa de forjamento a frio Barnaul, Russia KB0032
Presă de forjare la rece Barnaul, Russia KB0032
Barnaul, Russia KB0032 Пресс для холодной объемной штамповки
Presa za hladno kovanje Barnaul, Russia KB0032
Barnaul, Russia KB0032 Kallsmidespress
Soğuk dövme presi Barnaul, Russia KB0032
EN
- Languages
English (GB)