Price on request
Make an offer| Type | Mechanical |
| Power in tons | 1000 T |
| Table length | 1000 mm |
| Table width | 800 mm |
| Ram stroke | 170 mm |
| Nbr of strokes/min | 32 |
| Distance between columns | 600 mm |
| Engine Power | 40 kW |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Barnaul K8340 |
| Last availability date | 06/03/2026 |
This Barnaul K8340 knuckle-joint stamping press is designed for heavy-duty industrial applications with a nominal force capacity of 1000 tons (approximately 10,000 kN). The press features a slide (ram) stroke of 170 mm and operates at a minimum of 32 single strokes per minute, with a permissible double stroke rate of up to 18 per minute. The distance between the table and slide at the bottom position is 630 mm, with an adjustment range of 16 mm to accommodate different workpiece sizes. The bolster table measures 1000 mm in length and 800 mm in width, providing a stable surface for stamping operations.
The main drive motor delivers 40 kW of power at a speed of 930 rpm, ensuring robust performance. The machine’s height above floor level is 3,470 mm, with an overall height of 3,620 mm. Its footprint measures 2,030 mm front to back and 1,950 mm left to right. The net weight without foundation is approximately 25,637 kg, reflecting its solid industrial build.
The press is painted green and shows signs of wear consistent with industrial use, including some dirt, metal shavings, scratches, and paint wear. The machine is equipped with a red emergency stop button on the left side panel for safety. An open side door on the left reveals internal mechanical components, including a visible feed mechanism with rollers and gear assembly. The electrical control box is located on the left side with an open panel exposing wiring. The ram and press area include mechanical linkage and guide rails, with adjustable bolts and mounts visible on the press frame. A yellow-painted linkage component is also present inside the press housing.
A metal identification plate is mounted on the machine surface, partially legible with markings indicating model K8340 and origin from the USSR. Additionally, a pressure tank or accumulator is mounted on the top rear section of the machine. Overall, the press appears structurally intact with no obvious damage to main components, suitable for various heavy stamping tasks in an industrial workshop environment.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Nominal force: 1000 ton (≈10,000 kN).
Slide (ram) stroke: 170 mm.
Number of single strokes per minute, not less than: 32 spm
Permissible number of double strokes per minute: 18 spm
Distance between table and slide at bottom position: 630 mm
Adjustment range of distance between table and slide: 16 mm.
Table size (bolster): 1000 × 800 mm
Main drive motor power: 40 kW; speed: 930 rpm.
Height of press above floor level: 3,470 mm.
Overall height: 3,620 mm.
Overall dimensions, mm: front to back 2,030; left to right 1,950.
Net weight without foundation: 25637 kg.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2025 |
| Offers online | 8 |
| Last activity | March 6, 2026 |
Nominal force: 1000 ton (≈10,000 kN).
Slide (ram) stroke: 170 mm.
Number of single strokes per minute, not less than: 32 spm
Permissible number of double strokes per minute: 18 spm
Distance between table and slide at bottom position: 630 mm
Adjustment range of distance between table and slide: 16 mm.
Table size (bolster): 1000 × 800 mm
Main drive motor power: 40 kW; speed: 930 rpm.
Height of press above floor level: 3,470 mm.
Overall height: 3,620 mm.
Overall dimensions, mm: front to back 2,030; left to right 1,950.
Net weight without foundation: 25637 kg.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Type | Mechanical |
| Power in tons | 1000 T |
| Table length | 1000 mm |
| Table width | 800 mm |
| Ram stroke | 170 mm |
| Nbr of strokes/min | 32 |
| Distance between columns | 600 mm |
| Engine Power | 40 kW |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Barnaul K8340 |
| Last availability date | 06/03/2026 |
This Barnaul K8340 knuckle-joint stamping press is designed for heavy-duty industrial applications with a nominal force capacity of 1000 tons (approximately 10,000 kN). The press features a slide (ram) stroke of 170 mm and operates at a minimum of 32 single strokes per minute, with a permissible double stroke rate of up to 18 per minute. The distance between the table and slide at the bottom position is 630 mm, with an adjustment range of 16 mm to accommodate different workpiece sizes. The bolster table measures 1000 mm in length and 800 mm in width, providing a stable surface for stamping operations.
The main drive motor delivers 40 kW of power at a speed of 930 rpm, ensuring robust performance. The machine’s height above floor level is 3,470 mm, with an overall height of 3,620 mm. Its footprint measures 2,030 mm front to back and 1,950 mm left to right. The net weight without foundation is approximately 25,637 kg, reflecting its solid industrial build.
The press is painted green and shows signs of wear consistent with industrial use, including some dirt, metal shavings, scratches, and paint wear. The machine is equipped with a red emergency stop button on the left side panel for safety. An open side door on the left reveals internal mechanical components, including a visible feed mechanism with rollers and gear assembly. The electrical control box is located on the left side with an open panel exposing wiring. The ram and press area include mechanical linkage and guide rails, with adjustable bolts and mounts visible on the press frame. A yellow-painted linkage component is also present inside the press housing.
A metal identification plate is mounted on the machine surface, partially legible with markings indicating model K8340 and origin from the USSR. Additionally, a pressure tank or accumulator is mounted on the top rear section of the machine. Overall, the press appears structurally intact with no obvious damage to main components, suitable for various heavy stamping tasks in an industrial workshop environment.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2025 |
| Offers online | 8 |
| Last activity | March 6, 2026 |
Преса за щамповане на кокалчета Barnaul K8340
Kolenový lis Barnaul K8340
Barnaul K8340 Stemplingspresse med knækled
Barnaul K8340 Kniehebelpresse
Πρέσα σφράγισης αρθρώσεων Barnaul K8340
Barnaul K8340 Knuckle-joint stamping press
Prensa de rótula Barnaul K8340
Presse à genouillère Barnaul K8340
Preša za utiskivanje zglobova Barnaul K8340
Barnaul K8340 Csuklós sajtoló prés
Pressa a ginocchiera Barnaul K8340
Štampavimo presas su jungtimi Barnaul K8340
Barnaul K8340 Knokkelgewricht-stempelpers
Prasa kolanowa Barnaul K8340
Prensa de estampagem articulada Barnaul K8340
Presă de ștanțare pentru articulații Barnaul K8340
Barnaul K8340 Коленорычажный штамповочный пресс
Presa za štancanje zglobnog zgloba Barnaul K8340
Barnaul K8340 Stämplingspress för knogleden
Kemik eklemli form presi Barnaul K8340
EN
- Languages
English (GB)