| Manufacturer | BARMAG |
|---|---|
| Model | FB9-1300-WS/HT |
| Year | 2000 |
| Location | Portugal
|
This listing is for a BARMAG extrusion line, model FB9-1300-WS/HT, manufactured in the year 2000. The line is designed for producing raw materials such as polyethylene and polypropylene. It features a motorized mixer with a capacity of 100 kgs per mix and a dosing unit equipped with a 200 kgs capacity hopper. The dosing unit operates with sensors and uses a vacuum type system. The main motor and drive are BARMAG branded, delivering 190 kW of power. The screw and barrel assembly has an average production capacity of approximately 6000 kgs per 24 hours when processing polypropylene.
The extrusion line includes a hanger-type die with a plastic flow width of 1340 mm, supported by a water bath cooling system with a closed circuit and 1000 L capacity. For cutting, there is a device capable of handling the same 1340 mm plastic flow width, equipped with ring tape spacers. The oven is a hot air blower type with a power rating of 90 kW. The system also includes goddets: two segment godets from the stretching unit to the annealing section, along with 4 and 6 rollers featuring oil-heated and chill roller cooling systems.
Additional components include a full fibrilator system with a needle roller capacity length of 1300 mm, and a winder bank consisting of 232 individual SAHM winders type 240E, manufactured in 2001. The tape suction unit has two motors covering from the first godet to the last, with two entry points. A cutting mill/chipper unit with 1.9 kW rotter type blades feeds material into a hopper. Thickness control is managed by a BETACONTROL unit manufactured in 2003, which operates with a full software program. The entire line is equipped with BARMAG's full monitoring and control system software.
Visually, the machine has a large structure with a blue base and multiple metal rollers aligned horizontally on one side. There are ducting pipes connected on top, likely for ventilation or exhaust purposes. The floor around the machine shows signs of wear and some stains, but the machine itself appears intact.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
1 BARMAG extrusion line type FB9-1300-WS/HT,
year 2000,
type of Raw Material produced : Polyethylene, Polypropylene,
line composed of:
1. Motorized Mixer – 100 kgs per mix capacity,
2. Dosing unit – Hopper 200 kgs capacity, sensor operated, vacuum type,
3. Main Motor/drive – BARMAG, 190 KW,
4. Screw and Barrel – average 6000 kgs/24h capacity (polypropylene),
5. Die – Hanger type, 1340 mm Plastic flow width,
6. Water bath – Cooling system, closed circuit 1000 L capacity,
7. Cutting device – 1340 mm Plastic flow width capacity, ring tape spacers,
8. Oven – Hot air blower type, 90 KW,
9. Goddets – 2 x segment godet from stretching unit to annealing 4 and 6 x rollers, oil, heated, chill roller cooling system,
10. Full Fibrilator system – needle roller capacity length 1300 mm,
11. Winder Bank – 232 individual SAHM winders type 240E (2001 manufactured),
12. Tape Suction Unit – 2 x motor covering 1 st godet to the last, 2 x entry,
13. Cutting mill/ chipper unit – 1.9 KW rotter type blades single feed to hopper,
14. Thickness control unit – BETACONTROL (2003 manufactured), full software program,
15. BARMAG Full monitoring and control system software
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
What year was this BARMAG extrusion line manufactured?
This BARMAG extrusion line type FB9-1300-WS/HT was manufactured in the year 2000.
What is the capacity of this equipment?
This equipment has a capacity of approximately 3,000 tons per year.
What type of product is this BARMAG extrusion line configured to produce?
This BARMAG extrusion line is configured for the production of PP fibrillated twine.
What types of materials can this equipment process?
This equipment can process both virgin PP and regranulate.
What processes are included in this BARMAG extrusion line?
This BARMAG extrusion line includes stretching, fibrillation, and winding processes.
What automation features does this equipment include?
This equipment features energy-efficient systems with a high level of automation, including PLC/inverter control.
Is this BARMAG extrusion line a complete and operational system?
This BARMAG extrusion line is a complete and operational system.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 88 |
| Last activity | July 16, 2026 |
1 BARMAG extrusion line type FB9-1300-WS/HT,
year 2000,
type of Raw Material produced : Polyethylene, Polypropylene,
line composed of:
1. Motorized Mixer – 100 kgs per mix capacity,
2. Dosing unit – Hopper 200 kgs capacity, sensor operated, vacuum type,
3. Main Motor/drive – BARMAG, 190 KW,
4. Screw and Barrel – average 6000 kgs/24h capacity (polypropylene),
5. Die – Hanger type, 1340 mm Plastic flow width,
6. Water bath – Cooling system, closed circuit 1000 L capacity,
7. Cutting device – 1340 mm Plastic flow width capacity, ring tape spacers,
8. Oven – Hot air blower type, 90 KW,
9. Goddets – 2 x segment godet from stretching unit to annealing 4 and 6 x rollers, oil, heated, chill roller cooling system,
10. Full Fibrilator system – needle roller capacity length 1300 mm,
11. Winder Bank – 232 individual SAHM winders type 240E (2001 manufactured),
12. Tape Suction Unit – 2 x motor covering 1 st godet to the last, 2 x entry,
13. Cutting mill/ chipper unit – 1.9 KW rotter type blades single feed to hopper,
14. Thickness control unit – BETACONTROL (2003 manufactured), full software program,
15. BARMAG Full monitoring and control system software
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
What year was this BARMAG extrusion line manufactured?
This BARMAG extrusion line type FB9-1300-WS/HT was manufactured in the year 2000.
What is the capacity of this equipment?
This equipment has a capacity of approximately 3,000 tons per year.
What type of product is this BARMAG extrusion line configured to produce?
This BARMAG extrusion line is configured for the production of PP fibrillated twine.
What types of materials can this equipment process?
This equipment can process both virgin PP and regranulate.
What processes are included in this BARMAG extrusion line?
This BARMAG extrusion line includes stretching, fibrillation, and winding processes.
What automation features does this equipment include?
This equipment features energy-efficient systems with a high level of automation, including PLC/inverter control.
Is this BARMAG extrusion line a complete and operational system?
This BARMAG extrusion line is a complete and operational system.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This listing is for a BARMAG extrusion line, model FB9-1300-WS/HT, manufactured in the year 2000. The line is designed for producing raw materials such as polyethylene and polypropylene. It features a motorized mixer with a capacity of 100 kgs per mix and a dosing unit equipped with a 200 kgs capacity hopper. The dosing unit operates with sensors and uses a vacuum type system. The main motor and drive are BARMAG branded, delivering 190 kW of power. The screw and barrel assembly has an average production capacity of approximately 6000 kgs per 24 hours when processing polypropylene.
The extrusion line includes a hanger-type die with a plastic flow width of 1340 mm, supported by a water bath cooling system with a closed circuit and 1000 L capacity. For cutting, there is a device capable of handling the same 1340 mm plastic flow width, equipped with ring tape spacers. The oven is a hot air blower type with a power rating of 90 kW. The system also includes goddets: two segment godets from the stretching unit to the annealing section, along with 4 and 6 rollers featuring oil-heated and chill roller cooling systems.
Additional components include a full fibrilator system with a needle roller capacity length of 1300 mm, and a winder bank consisting of 232 individual SAHM winders type 240E, manufactured in 2001. The tape suction unit has two motors covering from the first godet to the last, with two entry points. A cutting mill/chipper unit with 1.9 kW rotter type blades feeds material into a hopper. Thickness control is managed by a BETACONTROL unit manufactured in 2003, which operates with a full software program. The entire line is equipped with BARMAG's full monitoring and control system software.
Visually, the machine has a large structure with a blue base and multiple metal rollers aligned horizontally on one side. There are ducting pipes connected on top, likely for ventilation or exhaust purposes. The floor around the machine shows signs of wear and some stains, but the machine itself appears intact.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 88 |
| Last activity | July 16, 2026 |
Линия за екструдиране на BARMAG тип FB9-1300-WS/HT
Vytlačovací linka BARMAG typ FB9-1300-WS/HT
BARMAG-ekstruderingslinje type FB9-1300-WS/HT
BARMAG-Extrusionsanlage Typ FB9-1300-WS/HT
Γραμμή διέλασης BARMAG τύπου FB9-1300-WS/HT
BARMAG extrusion line type FB9-1300-WS/HT
Línea de extrusión BARMAG tipo FB9-1300-WS/HT
Ligne d'extrusion BARMAG type FB9-1300-WS/HT
BARMAG ekstruzijska linija tip FB9-1300-WS/HT
FB9-1300-WS/HT típusú BARMAG extrudáló vonal
Linea di estrusione BARMAG tipo FB9-1300-WS/HT
FB9-1300-WS/HT tipo BARMAG ekstruzijos linija
BARMAG extrusielijn type FB9-1300-WS/HT
Linia do wytłaczania BARMAG typu FB9-1300-WS/HT
Linha de extrusão BARMAG tipo FB9-1300-WS/HT
Linie de extrudare BARMAG tip FB9-1300-WS/HT
Экструзионная линия BARMAG тип FB9-1300-WS/HT
BARMAG ekstruziona linija tip FB9-1300-WS/HT
BARMAG extruderingslinje typ FB9-1300-WS/HT
BARMAG ekstrüzyon hattı tipi FB9-1300-WS/HT
EN
- Languages
English (GB)