Price on request
Make an offer| Force | 2800 T |
| Stroke length | 700 mm |
| ------------------- | |
| Weight | 3000 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Banning H155/V105 |
| Last availability date | 02/04/2026 |
This Banning H155/V105 ring rolling mill, manufactured in 2002, is designed for forging seamless rings at forging temperatures. It supports a wide working range, capable of producing finished rings with outside diameters from 350 mm up to 2800 mm and heights ranging from 80 mm to 500 mm. The machine can handle ring blanks with a maximum height of 580 mm and a mandrel diameter of 170 mm. It accommodates ring weights up to approximately 3000 kg, with the maximum ring weight and wall thickness-to-height ratio depending on the ring’s cross section, profile, material, deformation resistance, temperature, and deformation speed.
The equipment features a horizontal stand with a maximum rolling force of 155 tons, an 800 mm diameter main roll, and a maximum rotation speed of 30 rpm. The rolling speed reaches up to approximately 1.25 m/sec, with a horizontal mandrel stroke of 700 mm. The vertical stand offers a rolling force of up to 105 tons, a taper cone angle of 45°, a horizontal stroke of 2500 mm, a vertical stroke of the upper taper roll of 500 mm, and a maximum distance between taper rolls of 580 mm.
The driving units include DC electro motors with nominal powers of 315 kW and 260 kW for different components, along with gear reducers and hydraulic power units. The hydraulic system operates at an operating pressure of 210 kg/cm², with multiple hydraulic pumps and motors for cooling and operation. Roll tools are cooled by water at a pressure of 0.2 kg/cm².
The machine is equipped with electric power supply units, control desks, and cabinets, allowing for operation with passes pressure control and actual value displays for ring outside diameter, calculated inside diameter, wall thickness, and height. Final diameter selection is also integrated.
Visual inspection shows a large green industrial forging machine with Banning branding on the vertical column. It includes a conveyor or feed mechanism and a horizontal base plate for material placement and movement. The machine exhibits signs of use such as chipped paint, surface wear, grime buildup, and metal debris, consistent with heavy industrial operation. Hydraulic hoses and cylinders are visible and connected, supporting the machine’s hydraulic functions. The forging head and tooling area show typical wear marks and metal debris. The machine is situated in an industrial environment with safety measures observed, including worker presence with safety helmets. Glowing hot metal pieces and steam or smoke around the tooling area indicate active forging processes during operation.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Forging Equipment
1) Ring Rolling Mill
The horizontal / vertical ring rolling mill is provided for rolling seamless rings at forging temperature.
2) Working Range
Outside diameter of finished ring : 350 - 2800 mm,
Height of finished of ring blank for : 80 - 500 mm,
Mandrel diameter : 170 mm,
Height of ring blank : max. 580 mm,
Ration of wall thickness to height : max. approx. 4:1,
Ring weight : max. approx. 3000 kg,
The max. possible ring weight as well as the obtainable ration " wall thickness to height" is dependent on the cross section of the ring, the ring profile and the ring material, its deformation resistance depending on temperature, and on deformation speed.
3) Main Characteristics
3-1 Horizontal stand
Rolling force : max. 155 tons,
Main roll diameter : 800 mm,
No. of revolution of main roll : max. 30 rmp,
Rolling speed : max. approx. 1.25 m/sec,
Horizontal stroke of mandrel : 700 mm,
3-2 Vertical stand
Rolling force : max. 105 tons,
Taper cone angle : 45 °,
Horizontal stroke of vertical stand : 2500 mm,
Vertical stroke of upper taper roll : 500 mm,
Max. distance between the taper rolls : 580 mm,
4) Driving Unit
4-1 -1 Driving motor( DC-electro motor)
Nominal power : 315 KW,
Armature voltage : 440 V,
4-1-2 Driving gear reducer
Nominal power : 260 KW,
Ratio of reducer : 1/40,
4-2 Driving Unit of Taper roll
4-2 -1 Driving motor( DC-electro motor)
Nominal power : 260 KW,
Armature voltage : 440 V,
4-2-2 Driving gear reducer
Nominal power : 260 KW,
Ratio of reducer (2-shift) : 1st : 1/6.9, 2nd : 1/16.3
5) Driving Units for Hydraulic Power Unit
5-1- Driving motor for hydraulic pumps
Nominal power : 55 kw 4set,
Nominal speed 1200 rpm,
5-1-2 Ac-Electro-Motor for Oil Cooler
Nominal power : 3.7 kw 2 set,
Nominal speed : 1750 rpm,
5-2 Hydraulic Pumps
5-2-1 Main pump : A7V-160 4 set,
Delivery : 4-180 1/min 2set,
5-2-2 Pump for Oil Cooler : PVV2-055 2 set
5-2-3 Operation pressure : 210 kg/cm2
6) Cooling of Roll Tools (The roll are cooled by water)
Pressure : 0.2kg/cm2,
7) Electric Equipment
Power Supply Unit
Control Desk
Control Cabinet
8) Control and Operation Function
Operation for the passes pressure control
9) Actual Value Display for the Ring
Ring O. D
Ring I. D (Calculated)
Ring wall thickness
Ring height
10) Selection of the Final Diameter
Ring O.D
Item Condition: Good working condition
Capacity Tons: 2800
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 14, 2026 |
Forging Equipment
1) Ring Rolling Mill
The horizontal / vertical ring rolling mill is provided for rolling seamless rings at forging temperature.
2) Working Range
Outside diameter of finished ring : 350 - 2800 mm,
Height of finished of ring blank for : 80 - 500 mm,
Mandrel diameter : 170 mm,
Height of ring blank : max. 580 mm,
Ration of wall thickness to height : max. approx. 4:1,
Ring weight : max. approx. 3000 kg,
The max. possible ring weight as well as the obtainable ration " wall thickness to height" is dependent on the cross section of the ring, the ring profile and the ring material, its deformation resistance depending on temperature, and on deformation speed.
3) Main Characteristics
3-1 Horizontal stand
Rolling force : max. 155 tons,
Main roll diameter : 800 mm,
No. of revolution of main roll : max. 30 rmp,
Rolling speed : max. approx. 1.25 m/sec,
Horizontal stroke of mandrel : 700 mm,
3-2 Vertical stand
Rolling force : max. 105 tons,
Taper cone angle : 45 °,
Horizontal stroke of vertical stand : 2500 mm,
Vertical stroke of upper taper roll : 500 mm,
Max. distance between the taper rolls : 580 mm,
4) Driving Unit
4-1 -1 Driving motor( DC-electro motor)
Nominal power : 315 KW,
Armature voltage : 440 V,
4-1-2 Driving gear reducer
Nominal power : 260 KW,
Ratio of reducer : 1/40,
4-2 Driving Unit of Taper roll
4-2 -1 Driving motor( DC-electro motor)
Nominal power : 260 KW,
Armature voltage : 440 V,
4-2-2 Driving gear reducer
Nominal power : 260 KW,
Ratio of reducer (2-shift) : 1st : 1/6.9, 2nd : 1/16.3
5) Driving Units for Hydraulic Power Unit
5-1- Driving motor for hydraulic pumps
Nominal power : 55 kw 4set,
Nominal speed 1200 rpm,
5-1-2 Ac-Electro-Motor for Oil Cooler
Nominal power : 3.7 kw 2 set,
Nominal speed : 1750 rpm,
5-2 Hydraulic Pumps
5-2-1 Main pump : A7V-160 4 set,
Delivery : 4-180 1/min 2set,
5-2-2 Pump for Oil Cooler : PVV2-055 2 set
5-2-3 Operation pressure : 210 kg/cm2
6) Cooling of Roll Tools (The roll are cooled by water)
Pressure : 0.2kg/cm2,
7) Electric Equipment
Power Supply Unit
Control Desk
Control Cabinet
8) Control and Operation Function
Operation for the passes pressure control
9) Actual Value Display for the Ring
Ring O. D
Ring I. D (Calculated)
Ring wall thickness
Ring height
10) Selection of the Final Diameter
Ring O.D
Item Condition: Good working condition
Capacity Tons: 2800
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Force | 2800 T |
| Stroke length | 700 mm |
| ------------------- | |
| Weight | 3000 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Banning H155/V105 |
| Last availability date | 02/04/2026 |
This Banning H155/V105 ring rolling mill, manufactured in 2002, is designed for forging seamless rings at forging temperatures. It supports a wide working range, capable of producing finished rings with outside diameters from 350 mm up to 2800 mm and heights ranging from 80 mm to 500 mm. The machine can handle ring blanks with a maximum height of 580 mm and a mandrel diameter of 170 mm. It accommodates ring weights up to approximately 3000 kg, with the maximum ring weight and wall thickness-to-height ratio depending on the ring’s cross section, profile, material, deformation resistance, temperature, and deformation speed.
The equipment features a horizontal stand with a maximum rolling force of 155 tons, an 800 mm diameter main roll, and a maximum rotation speed of 30 rpm. The rolling speed reaches up to approximately 1.25 m/sec, with a horizontal mandrel stroke of 700 mm. The vertical stand offers a rolling force of up to 105 tons, a taper cone angle of 45°, a horizontal stroke of 2500 mm, a vertical stroke of the upper taper roll of 500 mm, and a maximum distance between taper rolls of 580 mm.
The driving units include DC electro motors with nominal powers of 315 kW and 260 kW for different components, along with gear reducers and hydraulic power units. The hydraulic system operates at an operating pressure of 210 kg/cm², with multiple hydraulic pumps and motors for cooling and operation. Roll tools are cooled by water at a pressure of 0.2 kg/cm².
The machine is equipped with electric power supply units, control desks, and cabinets, allowing for operation with passes pressure control and actual value displays for ring outside diameter, calculated inside diameter, wall thickness, and height. Final diameter selection is also integrated.
Visual inspection shows a large green industrial forging machine with Banning branding on the vertical column. It includes a conveyor or feed mechanism and a horizontal base plate for material placement and movement. The machine exhibits signs of use such as chipped paint, surface wear, grime buildup, and metal debris, consistent with heavy industrial operation. Hydraulic hoses and cylinders are visible and connected, supporting the machine’s hydraulic functions. The forging head and tooling area show typical wear marks and metal debris. The machine is situated in an industrial environment with safety measures observed, including worker presence with safety helmets. Glowing hot metal pieces and steam or smoke around the tooling area indicate active forging processes during operation.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 14, 2026 |
Преса Banning H155/V105
Lis Banning H155/V105
Banning H155/V105 Presse
Banning H155/V105 Presse
Πρέσα Banning H155/V105
Banning H155/V105 Press
Prensa Banning H155/V105
Presse Banning H155/V105
Preša Banning H155/V105
Banning H155/V105 Prés
Pressa Banning H155/V105
Banning H155/V105 Presas
Banning H155/V105 Pers
Prasa Banning H155/V105
Prensa Banning H155/V105
Prese Banning H155/V105
Banning H155/V105 Пресс
Presa Banning H155/V105
Banning H155/V105 Press
Pres Banning H155/V105
EN
- Languages
English (GB)