| Manufacturer | Automatec |
|---|---|
| Model | PR140/TBA |
| Year | 2016 |
| Location | USA
|
| Category | Weaving - Looms |
| Working width | 400 cm |
| Nbr of beams | |
| worked hours | |
| hours under power | |
| state | Not specified |
| At local norms | --------- |
| status | |
| Last availability date | 26/05/2026 |
| Product id | P230522083 |
| Language |
Automatec PR140/TBA
Jehlový tkací stroj Automatec PR140/TBA
Automatec PR140/TBA
Automatec PR140/TBA Webmaschine mit Lanzen
Automatec PR140/TBA
Automatec PR140/TBA loom
Telar para tejer con pinzas Automatec PR140/TBA
Métier à tisser à lances Automatec PR140/TBA
Automatec PR140/TBA
Automatec PR140/TBA
Telaio a lancia Automatec PR140/TBA
Automatec PR140/TBA
Automatec PR140/TBA
Używana maszyna - krosna rapierowe Automatec PR140/TBA
Automatec PR140/TBA
Automatec PR140/TBA
Automatec PR140/TBA Ткацкий станок с рапирами
Automatec PR140/TBA
Automatec PR140/TBA
Meç tezgahı Automatec PR140/TBA
|
This Automatec PR140/TBA industrial weaving loom, manufactured in 2016, features a working width of 400 cm, making it suitable for large-scale textile production. The loom is designed with an offset configuration and operates with a single board down and single board up setup. Each section of the loom is independently driven by individual motors, allowing for precise control and efficient operation. The maximum stroke frequency reaches up to 1200 strokes per minute for each beam, with a stroke length of 60 mm. Needle density is configurable, with the current setup at 5000 needles per board, and the capability to accommodate up to 10,000 needles per meter.
The machine is equipped with a control cabinet that includes a touchscreen display and multiple colored buttons, including an emergency stop for enhanced operational safety. The control panel and loom exterior are clean and well-maintained. For manual adjustments, the loom features two hand wheels located on the side. Electrical wiring and tubing are organized and connected to the loom, alongside hydraulic or pneumatic components such as filters and hoses, supporting its operational functions. An electric motor is mounted on the side with attached wiring.
Additionally, the loom includes a conveyor belt system integrated into its design to facilitate material handling. Large industrial ventilation or filtration units are connected with flexible ducting, complemented by cooling or heat exchange units with visible fins and piping. Overall, the equipment appears clean and intact, with no visible signs of rust or damage, indicating careful maintenance.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
• 4 Meter Wide Loom
• Single board down, single board up
• Offset design
• Each section driven by individual motors
• Max stroke frequency is 1200 SPM each beam
• 60MM Stroke
• Needle Density is 5000/10000 needles per meter
• Current Setup is 5000 needles per board
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Factory – small or medium company |
| Active since | 2023 |
| Offers online | 1 |
| Last activity | June 2, 2026 |
• 4 Meter Wide Loom
• Single board down, single board up
• Offset design
• Each section driven by individual motors
• Max stroke frequency is 1200 SPM each beam
• 60MM Stroke
• Needle Density is 5000/10000 needles per meter
• Current Setup is 5000 needles per board
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Category | Weaving - Looms |
| Working width | 400 cm |
| Nbr of beams | |
| worked hours | |
| hours under power | |
| state | Not specified |
| At local norms | --------- |
| status | |
| Last availability date | 26/05/2026 |
| Product id | P230522083 |
| Language |
Automatec PR140/TBA
Jehlový tkací stroj Automatec PR140/TBA
Automatec PR140/TBA
Automatec PR140/TBA Webmaschine mit Lanzen
Automatec PR140/TBA
Automatec PR140/TBA loom
Telar para tejer con pinzas Automatec PR140/TBA
Métier à tisser à lances Automatec PR140/TBA
Automatec PR140/TBA
Automatec PR140/TBA
Telaio a lancia Automatec PR140/TBA
Automatec PR140/TBA
Automatec PR140/TBA
Używana maszyna - krosna rapierowe Automatec PR140/TBA
Automatec PR140/TBA
Automatec PR140/TBA
Automatec PR140/TBA Ткацкий станок с рапирами
Automatec PR140/TBA
Automatec PR140/TBA
Meç tezgahı Automatec PR140/TBA
|
This Automatec PR140/TBA industrial weaving loom, manufactured in 2016, features a working width of 400 cm, making it suitable for large-scale textile production. The loom is designed with an offset configuration and operates with a single board down and single board up setup. Each section of the loom is independently driven by individual motors, allowing for precise control and efficient operation. The maximum stroke frequency reaches up to 1200 strokes per minute for each beam, with a stroke length of 60 mm. Needle density is configurable, with the current setup at 5000 needles per board, and the capability to accommodate up to 10,000 needles per meter.
The machine is equipped with a control cabinet that includes a touchscreen display and multiple colored buttons, including an emergency stop for enhanced operational safety. The control panel and loom exterior are clean and well-maintained. For manual adjustments, the loom features two hand wheels located on the side. Electrical wiring and tubing are organized and connected to the loom, alongside hydraulic or pneumatic components such as filters and hoses, supporting its operational functions. An electric motor is mounted on the side with attached wiring.
Additionally, the loom includes a conveyor belt system integrated into its design to facilitate material handling. Large industrial ventilation or filtration units are connected with flexible ducting, complemented by cooling or heat exchange units with visible fins and piping. Overall, the equipment appears clean and intact, with no visible signs of rust or damage, indicating careful maintenance.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2023 |
| Offers online | 1 |
| Last activity | June 2, 2026 |
EN
- Languages
English (GB)