Price on request
View price| Clamping force | T |
| Screw diameter | 90 mm |
| Tie bar spacing (H) | 820 mm |
| Tie bar spacing (V) | 820 mm |
| Shot volume | 2036 cm³ |
| Shot weight | 1860 g |
| Pressure on material | bar |
| Platen length | 1171 mm |
| Platen width | 1171 mm |
| Bi-metal screw | |
| Equipped with robot | |
| Robot interface | |
| Number of cores | |
| Number of heating zones | |
| Opening of the press | 700 mm |
| Mould size | |
| ------------------- | |
| Length x width x height | - × - × - |
| Weight | 22500 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 13/05/2026 |
This Arburg SELECTA 820 S 4000 - 3200 is a hydraulic injection moulding machine manufactured in 2005, designed for high-capacity production needs. It features a robust clamping force of 4000 kN, enabling it to handle large and complex moulds effectively. The machine has a platen size of 1171 x 1171 mm, providing ample space for mould installation and operation. The tie bar spacing is 820 x 820 mm, which supports the structural integrity during the clamping process.
The machine's opening stroke is 700 mm, facilitating easy mould changes and part removal. The maximum daylight opening reaches 1550 mm, allowing accommodation of tall moulds. The ejector system offers an ejector force of 100 kN with a stroke of 250 mm, assisting in reliable part ejection.
The injection unit is equipped with a 90 mm screw diameter, capable of delivering a shot volume of 2036 cm³ and a maximum shot weight of 1860 grams (PS). The screw has a maximum stroke of 320 mm and operates at speeds up to 350 rpm, ensuring efficient plasticizing and injection performance. Injection pressures vary depending on the screw diameter, with the 90 mm screw capable of up to 1530 bar.
Powering the machine is a 55 kW hydraulic pump motor, with a total installed power of 96.2 kW. Heating is managed through six cylinder heating zones totaling 9800 W and a 1250 W nozzle heater. The oil tank capacity is 590 liters, supporting stable hydraulic operation.
The machine weighs 22,500 kg and features a protective metal grid for safety. It has a control panel with a display and buttons located on the right side, including an emergency stop button and several warning labels for operational safety. The machine's body is turquoise and yellow, and it appears to be in good physical condition with no visible damage, although some surface dirt and wear are present.
This Arburg injection moulding machine is suitable for industrial applications requiring reliable and precise moulding capabilities. Four units are available for sale. For further information, please contact us.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Hydraulic injection moulding machine manufactured in 2005. This Arburg SELECTA 820 S 4000 - 3200 features a clamping force of 4000 kN and an opening stroke of 700 mm. The machine has a platen size of 1171 x 1171 mm and a maximum moving platen weight of 4500 kg. If you are looking to get high-quality injection moulding capabilities, consider the Arburg SELECTA 820 S 4000 - 3200 machine we have for sale. Contact us for further details.Quantity available: 4
Clamping unit:
Opening force: 100 kN
Opening stroke: 700 mm
Minimum mould height: 350 mm
Maximum daylight: 1550 mm
Tie bar spacing: 820 x 820 mm
Platen size: 1171 x 1171 mm
Max. moving platen weight: 4500 kg
Ejector force: 100 kN
Ejector stroke: 250 mm
Injection unit:
Screw diameter: 70 / 80 / 90 mm
Screw L/D ratio: 23 / 20 / 18
Max. screw stroke: 320 mm
Shot volume: 1323 / 1608 / 2036 cm³
Max. shot weight (PS): 1215 / 1469 / 1860 g
Injection pressure: 2500 / 2000 / 1530 bar
Injection rate: 304 / 396 / 502 cm³/s
Plasticizing capacity: 1188 / 1552 / 1964 g/s
Screw speed: 350 rpm
Screw peripheral speed: 65 / 75 / 80 m/min
Screw torque: 2247 Nm
Nozzle contact force: 110 kN
Nozzle stroke: 600 mm
Drive and power:
Hydraulic pump motor: 55 kW
Total installed power: 96.2 kW
Heating:
Cylinder heating capacity: 6 zones (5500 + 4300 W)
Nozzle heating: 1250 W
Oil tank capacity: 590 l
Clamping Force: 4000 kN
Machine Weight: 22500 kg
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1981 |
| Last activity | May 13, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Hydraulic injection moulding machine manufactured in 2005. This Arburg SELECTA 820 S 4000 - 3200 features a clamping force of 4000 kN and an opening stroke of 700 mm. The machine has a platen size of 1171 x 1171 mm and a maximum moving platen weight of 4500 kg. If you are looking to get high-quality injection moulding capabilities, consider the Arburg SELECTA 820 S 4000 - 3200 machine we have for sale. Contact us for further details.Quantity available: 4
Clamping unit:
Opening force: 100 kN
Opening stroke: 700 mm
Minimum mould height: 350 mm
Maximum daylight: 1550 mm
Tie bar spacing: 820 x 820 mm
Platen size: 1171 x 1171 mm
Max. moving platen weight: 4500 kg
Ejector force: 100 kN
Ejector stroke: 250 mm
Injection unit:
Screw diameter: 70 / 80 / 90 mm
Screw L/D ratio: 23 / 20 / 18
Max. screw stroke: 320 mm
Shot volume: 1323 / 1608 / 2036 cm³
Max. shot weight (PS): 1215 / 1469 / 1860 g
Injection pressure: 2500 / 2000 / 1530 bar
Injection rate: 304 / 396 / 502 cm³/s
Plasticizing capacity: 1188 / 1552 / 1964 g/s
Screw speed: 350 rpm
Screw peripheral speed: 65 / 75 / 80 m/min
Screw torque: 2247 Nm
Nozzle contact force: 110 kN
Nozzle stroke: 600 mm
Drive and power:
Hydraulic pump motor: 55 kW
Total installed power: 96.2 kW
Heating:
Cylinder heating capacity: 6 zones (5500 + 4300 W)
Nozzle heating: 1250 W
Oil tank capacity: 590 l
Clamping Force: 4000 kN
Machine Weight: 22500 kg
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Clamping force | T |
| Screw diameter | 90 mm |
| Tie bar spacing (H) | 820 mm |
| Tie bar spacing (V) | 820 mm |
| Shot volume | 2036 cm³ |
| Shot weight | 1860 g |
| Pressure on material | bar |
| Platen length | 1171 mm |
| Platen width | 1171 mm |
| Bi-metal screw | |
| Equipped with robot | |
| Robot interface | |
| Number of cores | |
| Number of heating zones | |
| Opening of the press | 700 mm |
| Mould size | |
| ------------------- | |
| Length x width x height | - × - × - |
| Weight | 22500 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 13/05/2026 |
This Arburg SELECTA 820 S 4000 - 3200 is a hydraulic injection moulding machine manufactured in 2005, designed for high-capacity production needs. It features a robust clamping force of 4000 kN, enabling it to handle large and complex moulds effectively. The machine has a platen size of 1171 x 1171 mm, providing ample space for mould installation and operation. The tie bar spacing is 820 x 820 mm, which supports the structural integrity during the clamping process.
The machine's opening stroke is 700 mm, facilitating easy mould changes and part removal. The maximum daylight opening reaches 1550 mm, allowing accommodation of tall moulds. The ejector system offers an ejector force of 100 kN with a stroke of 250 mm, assisting in reliable part ejection.
The injection unit is equipped with a 90 mm screw diameter, capable of delivering a shot volume of 2036 cm³ and a maximum shot weight of 1860 grams (PS). The screw has a maximum stroke of 320 mm and operates at speeds up to 350 rpm, ensuring efficient plasticizing and injection performance. Injection pressures vary depending on the screw diameter, with the 90 mm screw capable of up to 1530 bar.
Powering the machine is a 55 kW hydraulic pump motor, with a total installed power of 96.2 kW. Heating is managed through six cylinder heating zones totaling 9800 W and a 1250 W nozzle heater. The oil tank capacity is 590 liters, supporting stable hydraulic operation.
The machine weighs 22,500 kg and features a protective metal grid for safety. It has a control panel with a display and buttons located on the right side, including an emergency stop button and several warning labels for operational safety. The machine's body is turquoise and yellow, and it appears to be in good physical condition with no visible damage, although some surface dirt and wear are present.
This Arburg injection moulding machine is suitable for industrial applications requiring reliable and precise moulding capabilities. Four units are available for sale. For further information, please contact us.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1981 |
| Last activity | May 13, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Arburg SELECTA 820 S 4000 - 3200 Машина за инжекционно формоване
Arburg SELECTA 820 S 4000 - 3200 Vstřikovací lis
Arburg SELECTA 820 S 4000 - 3200 Injiceringsstøbemaskine
Arburg SELECTA 820 S 4000 - 3200 Spritzgießmaschine
Arburg SELECTA 820 S 4000 - 3200 Μηχανή έγχυσης πλαστικών
Arburg SELECTA 820 S 4000 - 3200 Injection moulding machine
Arburg SELECTA 820 S 4000 - 3200 Máquina de moldeo por inyección
Arburg SELECTA 820 S 4000 - 3200 Machine de moulage par injection
Arburg SELECTA 820 S 4000 - 3200 Stroje za brizganje plastike
Arburg SELECTA 820 S 4000 - 3200 Fröccsöntőgép
Arburg SELECTA 820 S 4000 - 3200 Macchina per stampaggio a iniezione
Arburg SELECTA 820 S 4000 - 3200 Įpurškimo liejimo mašina
Arburg SELECTA 820 S 4000 - 3200 Spuitgietmachine
Arburg SELECTA 820 S 4000 - 3200 Wtryskarka
Arburg SELECTA 820 S 4000 - 3200 Máquina de moldagem por injeção
Arburg SELECTA 820 S 4000 - 3200 Mașină de turnare prin injecție
Arburg SELECTA 820 S 4000 - 3200 Литейный пресс для литья под давлением
Arburg SELECTA 820 S 4000 - 3200 Mašina za injekciono prešanje
Arburg SELECTA 820 S 4000 - 3200 Formsprutningsmaskin
Arburg SELECTA 820 S 4000 - 3200 Enjeksiyon kalıplama makinesi
EN
- Languages
English (GB)