| Manufacturer | ARBURG |
|---|---|
| Model | ALLROUNDER 520 H 1500-400 |
| Year | 2015 |
| Location | Spain
|
ARBURG ALLROUNDER 520 H 1500-400 injection molding machine, 2015 model. This injection molding machine is equipped with a 520 H clamping unit that offers a clamping force of 1500 kN and an opening force with a stroke of 450 mm. The mold mounting height is adjustable, with a fixed/variable range from 250 to 550 mm, and the distance between tie bars is also variable between 700 and 1000 mm. The distance between columns is 520 x 520 mm, while the mold clamping platens measure 695 x 695 mm, supporting a maximum moving half mold weight of 1000 kg.
Regarding the ejector, it has a force of 40 kN and a stroke of 175 mm. The no-load cycle time can reach a minimum of 1.5 seconds. The injection screw has a diameter of 40 mm, an effective length of 20 L/D, and a stroke of 160 mm. The calculated injection volume is 201 cm³, with an injection weight of 184 grams. The machine has a material throughput of 29 kg/h and a maximum injection pressure of 2000 s-bar, with an adjustable hold pressure time between 45 and 2000 s-bar. The injection flow rate is 214 cm³/s and the injection speed reaches 170 mm/s.
The total power of the heating zones is 9.7 kW distributed across 5 zones, and the hydraulic oil capacity is 160 liters. The machine dimensions are 2215 mm in height and 4672 mm in length, with a total weight of 6700 kg.
This equipment is offered together with a 2013 WITTMANN W818-2066 robot and a conveyor belt, forming a complete installation for injection molding processes.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
ARBURG ALLROUNDER 520 H 1500-400 (2015) Injection moulding machine
In operation
Hours: 68946 h.
Clamping force: 1500 kN
Clamping unit 520 H
Opening force / stroke: 450 mm.
Fixed / variable mould mounting height: 250-550 mm.
Fixed / variable platen spacing: 700-1000 mm.
Column spacing: 520 x 520 mm
Mold clamping platens (width x height) 695 x 695 mm.
Weight of movable mould half: 1000 kg max.
Force – Ejector stroke: 40 kN – 175 mm
Idle cycle time: Conformt Min 1.5 – s- 364
Screw diameter: 40 mm.
Effective screw length: 20 L/D
Screw stroke: 160 mm.
Calculated injection volume: 201 cm3
Weight per injection: 184 g. Ps.
Material flow rate: 29 kg/h. PS
Injection pressure: 2000 s-bar
Post-pressure time: 45-2000 s-bar
Injection flow: 214 cm3/s
Injection speed: 170 mm/s
Power – heating zones: 9.7 kW – 5
Oil capacity: 160 l.
Weight: 6700 kg.
Height: 2215 mm.
Length: 4672 mm.
Price Complete installation: Injection moulding machine + WITTMANN W818-2066 (2013) Robot + Conveyor belt
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
How many operating hours does this ARBURG ALLROUNDER 520 H 1500-400 have?
This ARBURG ALLROUNDER 520 H 1500-400 has 68,946 hours of operation.
How many cycles has this equipment completed?
This equipment has completed 31,171,572 cycles.
Is the machine currently disconnected?
The machine is currently disconnected and cannot be seen in operation.
Are videos of the machine available for review?
Videos of the machine are available for review.
How many operating hours does this equipment have?
This equipment has 68,946 hours of operation.
How many cycles has this equipment completed?
This equipment has completed 31,171,572 cycles.
Is the machine currently operational?
The machine has been disconnected and is not currently operational.
Are videos of the machine available for review?
Videos of the machine are available for review.
How many operating hours does this equipment have?
This equipment has 68,946 hours of operation.
How many cycles has this machine completed?
This machine has completed 31,171,572 cycles.
Is the unit currently operational?
The unit has been disconnected and is not currently operational.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 118 |
| Last activity | Oct. 10, 2026 |
ARBURG ALLROUNDER 520 H 1500-400 (2015) Injection moulding machine
In operation
Hours: 68946 h.
Clamping force: 1500 kN
Clamping unit 520 H
Opening force / stroke: 450 mm.
Fixed / variable mould mounting height: 250-550 mm.
Fixed / variable platen spacing: 700-1000 mm.
Column spacing: 520 x 520 mm
Mold clamping platens (width x height) 695 x 695 mm.
Weight of movable mould half: 1000 kg max.
Force – Ejector stroke: 40 kN – 175 mm
Idle cycle time: Conformt Min 1.5 – s- 364
Screw diameter: 40 mm.
Effective screw length: 20 L/D
Screw stroke: 160 mm.
Calculated injection volume: 201 cm3
Weight per injection: 184 g. Ps.
Material flow rate: 29 kg/h. PS
Injection pressure: 2000 s-bar
Post-pressure time: 45-2000 s-bar
Injection flow: 214 cm3/s
Injection speed: 170 mm/s
Power – heating zones: 9.7 kW – 5
Oil capacity: 160 l.
Weight: 6700 kg.
Height: 2215 mm.
Length: 4672 mm.
Price Complete installation: Injection moulding machine + WITTMANN W818-2066 (2013) Robot + Conveyor belt
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
How many operating hours does this ARBURG ALLROUNDER 520 H 1500-400 have?
This ARBURG ALLROUNDER 520 H 1500-400 has 68,946 hours of operation.
How many cycles has this equipment completed?
This equipment has completed 31,171,572 cycles.
Is the machine currently disconnected?
The machine is currently disconnected and cannot be seen in operation.
Are videos of the machine available for review?
Videos of the machine are available for review.
How many operating hours does this equipment have?
This equipment has 68,946 hours of operation.
How many cycles has this equipment completed?
This equipment has completed 31,171,572 cycles.
Is the machine currently operational?
The machine has been disconnected and is not currently operational.
Are videos of the machine available for review?
Videos of the machine are available for review.
How many operating hours does this equipment have?
This equipment has 68,946 hours of operation.
How many cycles has this machine completed?
This machine has completed 31,171,572 cycles.
Is the unit currently operational?
The unit has been disconnected and is not currently operational.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
ARBURG ALLROUNDER 520 H 1500-400 injection molding machine, 2015 model. This injection molding machine is equipped with a 520 H clamping unit that offers a clamping force of 1500 kN and an opening force with a stroke of 450 mm. The mold mounting height is adjustable, with a fixed/variable range from 250 to 550 mm, and the distance between tie bars is also variable between 700 and 1000 mm. The distance between columns is 520 x 520 mm, while the mold clamping platens measure 695 x 695 mm, supporting a maximum moving half mold weight of 1000 kg.
Regarding the ejector, it has a force of 40 kN and a stroke of 175 mm. The no-load cycle time can reach a minimum of 1.5 seconds. The injection screw has a diameter of 40 mm, an effective length of 20 L/D, and a stroke of 160 mm. The calculated injection volume is 201 cm³, with an injection weight of 184 grams. The machine has a material throughput of 29 kg/h and a maximum injection pressure of 2000 s-bar, with an adjustable hold pressure time between 45 and 2000 s-bar. The injection flow rate is 214 cm³/s and the injection speed reaches 170 mm/s.
The total power of the heating zones is 9.7 kW distributed across 5 zones, and the hydraulic oil capacity is 160 liters. The machine dimensions are 2215 mm in height and 4672 mm in length, with a total weight of 6700 kg.
This equipment is offered together with a 2013 WITTMANN W818-2066 robot and a conveyor belt, forming a complete installation for injection molding processes.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 118 |
| Last activity | Oct. 10, 2026 |
Шприцмашина ARBURG ALLROUNDER 520 H 1500-400
Vstřikovací lis ARBURG ALLROUNDER 520 H 1500-400
ARBURG ALLROUNDER 520 H 1500-400 Sprøjtestøbemaskine
ARBURG ALLROUNDER 520 H 1500-400 Spritzgießmaschine
Πρέσα έγχυσης ARBURG ALLROUNDER 520 H 1500-400
ARBURG ALLROUNDER 520 H 1500-400 Injection moulding machine
Inyectora ARBURG ALLROUNDER 520 H 1500-400
Presse à injecter ARBURG ALLROUNDER 520 H 1500-400
Stroj za injekcijsko prešanje ARBURG ALLROUNDER 520 H 1500-400
ARBURG ALLROUNDER 520 H 1500-400 Fröccsöntőgép
Pressa a iniezione ARBURG ALLROUNDER 520 H 1500-400
ARBURG ALLROUNDER 520 H 1500-400 Įpurškimo liejimo staklės
ARBURG ALLROUNDER 520 H 1500-400 Spuitgietmachine
Wtryskarka ARBURG ALLROUNDER 520 H 1500-400
Injetora ARBURG ALLROUNDER 520 H 1500-400
Mașină de injectat ARBURG ALLROUNDER 520 H 1500-400
ARBURG ALLROUNDER 520 H 1500-400 Термопластавтомат
Mašina za injekciono prešanje ARBURG ALLROUNDER 520 H 1500-400
ARBURG ALLROUNDER 520 H 1500-400 Formsprutningsmaskin
Enjeksiyon makinesi ARBURG ALLROUNDER 520 H 1500-400
EN
- Languages
English (GB)