Sorry, this offer is no longer available on Exapro

Used Arburg 520 C 2000 - 150/150 Injection moulding machine

Here is a selection of similar machines

Used Arburg 520 C 2000 - 150/150 Injection moulding machine Verified seller Exaprime Good value

Price on request

Manufacturer Arburg
Model 520 C 2000 - 150 / 150
Year 2002
Location Czech Republic CZ
Category Injection moulding machines
Product id P220519189
This machine is in perfect condition for its age, was regularly maintained and is at CE norms. It is located in a large automotive factory but was working on and off according to production plans (no regular shifts, no intensive production).

It will stop producing at the middle of July and can be collected then After that, the machine will be moved to a new location but will no longer be visible under power.


The machine is equipped with two injection units, after agreement it is possible to buy Wittmann W721 manipulators

Screw diameter: 35 + 25mm
Injection volume: 106 + 54cm³
Injection weight: 89 + 45g

Type of material used:
Horizontal : PP T20 *** PBT GF 30 *** PC/ABS
Vertical : PP T40 *** POM – C

service history:

5.2019 – Oversealing of valve blocks
12.2017 – Replacement of auger and complete tip
8.2016 – Repair of pumps, oil change
11.2015 – Oversealing valve. blocks
10.2014 – Replacing the floppy disk drive with a CF card reader
6.2014 – Sealing of the injection unit
3.2014 – Sealing of the movable plate cylinder
4.2013 – Machine calibration
9.2012 – Replacement of lower cylinder, auger and tip
4.2012 – Overhaul of the hydraulic pump
3.2012 – Replacement of valve 176 407
4.2009 – Machine calibration
2.2009 – Reconstruction of hydr. pumps
4.2008 – Replacement of tips on both center. Aggregates
1.2008 – Sealing of the movable plate cylinder
10.2006 – Replacement of the auger tip
1.2006 – Machine calibration
12.2004 – Calibration of the machine

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Clamping force 203 T
Screw diameter 35 mm
Tie bar spacing (H) 520 mm
Tie bar spacing (V) 520 mm
Shot volume 106 cm³
Shot weight 89 g
Pressure on material 2500 bar
Platen length 795 mm
Platen width 795 mm
Bi-metal screw Yes
Robot interface Euromap E 12
Number of cores 2
Number of heating zones 9
Opening of the press 950 mm
Mould size 650
-------------------
Length x width x height 4910.0 × 1820.0 × 3750.0
Weight 7500 kg
Worked hours
Hours under power
State good
At local norms ---------
Status visible but unplugged
Client type User – large company
Active since 2022
Offers online 3
Last activity Nov. 24, 2022

Description

This machine is in perfect condition for its age, was regularly maintained and is at CE norms. It is located in a large automotive factory but was working on and off according to production plans (no regular shifts, no intensive production).

It will stop producing at the middle of July and can be collected then After that, the machine will be moved to a new location but will no longer be visible under power.


The machine is equipped with two injection units, after agreement it is possible to buy Wittmann W721 manipulators

Screw diameter: 35 + 25mm
Injection volume: 106 + 54cm³
Injection weight: 89 + 45g

Type of material used:
Horizontal : PP T20 *** PBT GF 30 *** PC/ABS
Vertical : PP T40 *** POM – C

service history:

5.2019 – Oversealing of valve blocks
12.2017 – Replacement of auger and complete tip
8.2016 – Repair of pumps, oil change
11.2015 – Oversealing valve. blocks
10.2014 – Replacing the floppy disk drive with a CF card reader
6.2014 – Sealing of the injection unit
3.2014 – Sealing of the movable plate cylinder
4.2013 – Machine calibration
9.2012 – Replacement of lower cylinder, auger and tip
4.2012 – Overhaul of the hydraulic pump
3.2012 – Replacement of valve 176 407
4.2009 – Machine calibration
2.2009 – Reconstruction of hydr. pumps
4.2008 – Replacement of tips on both center. Aggregates
1.2008 – Sealing of the movable plate cylinder
10.2006 – Replacement of the auger tip
1.2006 – Machine calibration
12.2004 – Calibration of the machine

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Clamping force 203 T
Screw diameter 35 mm
Tie bar spacing (H) 520 mm
Tie bar spacing (V) 520 mm
Shot volume 106 cm³
Shot weight 89 g
Pressure on material 2500 bar
Platen length 795 mm
Platen width 795 mm
Bi-metal screw Yes
Robot interface Euromap E 12
Number of cores 2
Number of heating zones 9
Opening of the press 950 mm
Mould size 650
-------------------
Length x width x height 4910.0 × 1820.0 × 3750.0
Weight 7500 kg
Worked hours
Hours under power
State good
At local norms ---------
Status visible but unplugged

About this seller

Client type User – large company
Active since 2022
Offers online 3
Last activity Nov. 24, 2022