The modular systems of the lamp base automatic machines are designed as single-purpose machines with built-in program and a continuous flow of a workpiece. During an uninterrupted technological process a lamp, base is connected to a centring contact by means of glass matrix – vitreous material being melted into the molten state in a furnace being a part of the machine.
A modular design of an equipment makes it possible to deliver the equipment in various modifications meeting the customers´ requirements. It is possible to assemble bayonet caps and screw caps by means of the tool exchange in the assortment of:
BA 9s BA 15s bayonet caps respectively
E10, E14/20, E14/25x17, E27/27, E 26 screw caps respectively
The cap is non-disassembable part of base casing, base contact and glass.
The equipment is designed for the processing of brass, aluminium, iron, stainless steel bases and so forth.
The equipment consists of the following units:
base casing feeder
base air conveyer
contact vibratory feeder
melting furnace capacity up to 60 kgs of glass/hr
electric energy 3+N, 50 Hz, 380 V
operation 2 operators
lighting gas – heating value 15,909 k/Nm3
natural gas – heating value 33,494 kJ/Nm3
overal air input:
- combustion air 160 Nm3/hr, 12 kPa
- casing feeding 200 Nm3/hr, 40 kPa
- cleaning 60 Nm3/hr, 0.6 Mpa
cooling water 200 I/hr
floor space with magazines 1,875 x 3,700 mm
height up to a furnace cowl 2,950 mm
overall weight appr. 5.000 kgs
natural gas input 14 Nm3/hr, 1,75 kPa
lighting gas input 40 Nm3/hr, 6kPa
waste up to 5,0 %
machine noisiness up to 95 decibels
The OMRON control system provides the electric control of the equipment.
Please note that this description may have been translated automatically. Contact us for further information.