APPLIED MICROSTRUCTURES INC MVD 100
The MVD 100 is a useful tool for depositing monolayers of organosilanes. It can be used to create highly hydrophobic surfaces, antifouling surfaces and biofunctionalized surfaces. A list of the monolayer deposition processes used in the system can be found on the tool’s web page.

The operation of the system is fairly simple. The tool possesses a reaction chamber and 3 vapor delivery lines. Line 1 is dedicated for water vapor which is used in some processes as a catalyst. Line 2 is dedicated to APTMS due to cross contamination concerns. Line 3 is then used for all remaining organosilanes. Each line features a liquid source, an expansion volume connected to a pressure gauge and a set of control valves. During a vapor fill cycle, Valve 1 will open while Valve 2 is shut allowing the vapor to flow from the source to the expansion volume. Once a specified pressure is reached, Valve 1 closes. At this time the Throttle Valve closes and Valve 2 opens, allowing the vapor to flow into the reaction chamber. The vapor remains in the chamber for a specified amount of time and then is pumped away. An O2 plasma source is also connected to the tool for surface preparation purposes.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status
Client type Consultant
Active since 2021
Offers online 1201
Last activity March 28, 2024

Description

APPLIED MICROSTRUCTURES INC MVD 100
The MVD 100 is a useful tool for depositing monolayers of organosilanes. It can be used to create highly hydrophobic surfaces, antifouling surfaces and biofunctionalized surfaces. A list of the monolayer deposition processes used in the system can be found on the tool’s web page.

The operation of the system is fairly simple. The tool possesses a reaction chamber and 3 vapor delivery lines. Line 1 is dedicated for water vapor which is used in some processes as a catalyst. Line 2 is dedicated to APTMS due to cross contamination concerns. Line 3 is then used for all remaining organosilanes. Each line features a liquid source, an expansion volume connected to a pressure gauge and a set of control valves. During a vapor fill cycle, Valve 1 will open while Valve 2 is shut allowing the vapor to flow from the source to the expansion volume. Once a specified pressure is reached, Valve 1 closes. At this time the Throttle Valve closes and Valve 2 opens, allowing the vapor to flow into the reaction chamber. The vapor remains in the chamber for a specified amount of time and then is pumped away. An O2 plasma source is also connected to the tool for surface preparation purposes.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Consultant
Active since 2021
Offers online 1201
Last activity March 28, 2024

Here is a selection of similar machines

APPLIED MICROSTRUCTURES INC MVD 100