511,000 €
Make an offer| ------------------- | |
| worked hours | |
| hours under power | |
| state | Not specified |
| At local norms | --------- |
| status | |
| Last availability date | 02/03/2026 |
This AMP Quantum G Typu HVF 60/60/100-12.0IQP vacuum furnace, manufactured in 2019, is designed for the tempering and hardening of steel, particularly high-alloy tool steels and carbon steels. The furnace supports advanced heat treatment processes including vacuum tempering and hardening, convection heating, and is prepared for NITRO-TOOL nitriding and PIRO-CARB vacuum carburizing technologies. It features gas cooling at a pressure of up to 12 bar absolute, enhancing the efficiency of cooling cycles.
The furnace chamber has standard insert dimensions of 600 x 600 x 900 to 1000 mm and can handle a gross load weight of up to 600 kg. It operates at a maximum temperature of 1300°C in vacuum with a temperature uniformity of ±6°C. Convection heating is effective up to 750°C at pressures up to 3 bar absolute. The furnace achieves a maximum vacuum range of 10⁻² mbar when clean, empty, and preheated, and up to 5 x 10⁻² mbar when cold.
Equipped with a robust pump system including mechanical vacuum pumps (300 m³/h) and a roots pump (1200 m³/h), the furnace maintains efficient vacuum conditions. The heating system uses graphite heating elements arranged circumferentially around the charge, powered by 150 kW of heating elements controlled via a thyristor electric controller.
The gas heating and cooling system ensures 360-degree gas distribution within the heating chamber. Control and measurement equipment include Type S thermocouples, piezoelectric pressure sensors, Pfeiffer PTR-280 vacuum heads, and a logic controller with a 15” PP520 B&R panel. Safety and operational controls are managed by a UDC-1200 safety regulator and a PP520 B&R programmer with an Automation Studio operator panel.
Additional features include a blower motor rated at 160 kW with speed regulation and frequency converters, a cooling system pump (80 m³/h), and an emergency pump (10 m³/h). The furnace is suitable for heat treatment in active atmospheres such as carburizing and carbonitriding.
The equipment is housed in a cylindrical chamber supported by orange structural supports and is accompanied by a white rectangular box with piping on top, a cylindrical extension with multiple bolts at the front, and an orange control cabinet labeled "AMP HEAT TREATMENT TECHNOLOGIES" featuring a display, buttons, multiple switches, and an emergency stop button. A vacuum or air pump unit with motor and connected piping is also included. Safety is enhanced with yellow safety railings surrounding the furnace. The surfaces show minor signs of use, including some scuffs, patches of paint or repair, and dirt marks, but the overall condition appears maintained. The furnace and its components are situated in an industrial warehouse environment with visible pallets, pipes, and cables nearby.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Vacuum furnace for tempering and hardening steel - model Quantum G, Type HVF 60/60/100- 12.01QP, with gas cooling at a pressure of 12 BAR, prepared for NITRO-TOOL nitriding and PIRO-CARB vacuum carburizing technology, together with the necessary equipment.
The hardening and tempering furnace is used for heat treatment of high-alloy tool steels and carbon steels. This is a device that allows you to significantly increase the service life of tools. A vacuum tempering and hardening furnace is needed to fully utilize the technological capabilities of the Anca tool sharpener. Increasing the service life of steel tools several times will significantly reduce the plant's operating costs.
Pump system
Mechanical vacuum pumps 1 x 300 m3/h
roots 1x 1200 m3/h
Gas heating and cooling system
Gas distribution in the heating chamber 360 degrees around the load
posterior wall of the ventricle and outlet arc
Heating system
graphite heating element on the circumference of the charge
Control, measurement and control equipment
Type of thermocouples Type S - 2 pcs.
Piezoelectric pressure sensor - 2 pcs
PTR-280 Pfeiffer vacuum head - 2 pcs
Logic controller with PP520 15” BR panel - 1 pc
UDC-1200 safety regulator
PP520 B&R-1 programmer - Automation Studio operator panel manufactured by B&R
4.7” E&H liquid crystal recorder – 1 pc
Power of heating elements 150 kW
Electric controller Heating Thyristor controller
Blower motor power 160 kW, 3000 rpm
Soft start 1 regulation of blower speed and frequency converters
Pumps
cooling system 80 m3/h
emergency pump 10 m3/h
Performance parameters.
Standard insert dimensions WxHxL 600x600x900 to 1000 [mm]
Gross load weight 600 kg gross
Maximum operating temperature in vacuum 1300 degrees C
Operating temperature
maximum operating temperature 1300 degrees C
convection heating up to 3bar abs up to 750 degrees C
heating in a vacuum up to 1300 degrees C
Temperature uniformity in the chamber: +/- 6 degrees Celsius
convection heating in the range of 150 - 750 degrees C
in vacuum in the range of 550 - 1,300 degrees C
Maximum vacuum
The furnace is clean, empty and preheated. Range 10-2mbar
Maximum vacuum
The furnace is clean, empty, preheated and cold. Range up to 5x10-2mbar
Maximum cooling pressure up to 12 bar abs
Pumping speed
Oven clean, empty, preheated and cold. Range up to 10-2mbar - 35 min
Infiltration
The furnace is clean, heated, empty and cold 10-3mbar x l/s
Technological processes Hardening and tempering of steel / Convection heating
Dispersion of hardness after quenching and
tempering 63 =0.5 HRC for SW7M steel in the form of a bar with a cross-section of 25x25 L=250 [mm]
Additional options Heat treatment in active atmospheres for carburizing
carbonitriding and other diffusion atmospheres
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Factory – large company |
| Active since | 2023 |
| Offers online | 1 |
| Last activity | Sept. 15, 2023 |
Vacuum furnace for tempering and hardening steel - model Quantum G, Type HVF 60/60/100- 12.01QP, with gas cooling at a pressure of 12 BAR, prepared for NITRO-TOOL nitriding and PIRO-CARB vacuum carburizing technology, together with the necessary equipment.
The hardening and tempering furnace is used for heat treatment of high-alloy tool steels and carbon steels. This is a device that allows you to significantly increase the service life of tools. A vacuum tempering and hardening furnace is needed to fully utilize the technological capabilities of the Anca tool sharpener. Increasing the service life of steel tools several times will significantly reduce the plant's operating costs.
Pump system
Mechanical vacuum pumps 1 x 300 m3/h
roots 1x 1200 m3/h
Gas heating and cooling system
Gas distribution in the heating chamber 360 degrees around the load
posterior wall of the ventricle and outlet arc
Heating system
graphite heating element on the circumference of the charge
Control, measurement and control equipment
Type of thermocouples Type S - 2 pcs.
Piezoelectric pressure sensor - 2 pcs
PTR-280 Pfeiffer vacuum head - 2 pcs
Logic controller with PP520 15” BR panel - 1 pc
UDC-1200 safety regulator
PP520 B&R-1 programmer - Automation Studio operator panel manufactured by B&R
4.7” E&H liquid crystal recorder – 1 pc
Power of heating elements 150 kW
Electric controller Heating Thyristor controller
Blower motor power 160 kW, 3000 rpm
Soft start 1 regulation of blower speed and frequency converters
Pumps
cooling system 80 m3/h
emergency pump 10 m3/h
Performance parameters.
Standard insert dimensions WxHxL 600x600x900 to 1000 [mm]
Gross load weight 600 kg gross
Maximum operating temperature in vacuum 1300 degrees C
Operating temperature
maximum operating temperature 1300 degrees C
convection heating up to 3bar abs up to 750 degrees C
heating in a vacuum up to 1300 degrees C
Temperature uniformity in the chamber: +/- 6 degrees Celsius
convection heating in the range of 150 - 750 degrees C
in vacuum in the range of 550 - 1,300 degrees C
Maximum vacuum
The furnace is clean, empty and preheated. Range 10-2mbar
Maximum vacuum
The furnace is clean, empty, preheated and cold. Range up to 5x10-2mbar
Maximum cooling pressure up to 12 bar abs
Pumping speed
Oven clean, empty, preheated and cold. Range up to 10-2mbar - 35 min
Infiltration
The furnace is clean, heated, empty and cold 10-3mbar x l/s
Technological processes Hardening and tempering of steel / Convection heating
Dispersion of hardness after quenching and
tempering 63 =0.5 HRC for SW7M steel in the form of a bar with a cross-section of 25x25 L=250 [mm]
Additional options Heat treatment in active atmospheres for carburizing
carbonitriding and other diffusion atmospheres
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| ------------------- | |
| worked hours | |
| hours under power | |
| state | Not specified |
| At local norms | --------- |
| status | |
| Last availability date | 02/03/2026 |
This AMP Quantum G Typu HVF 60/60/100-12.0IQP vacuum furnace, manufactured in 2019, is designed for the tempering and hardening of steel, particularly high-alloy tool steels and carbon steels. The furnace supports advanced heat treatment processes including vacuum tempering and hardening, convection heating, and is prepared for NITRO-TOOL nitriding and PIRO-CARB vacuum carburizing technologies. It features gas cooling at a pressure of up to 12 bar absolute, enhancing the efficiency of cooling cycles.
The furnace chamber has standard insert dimensions of 600 x 600 x 900 to 1000 mm and can handle a gross load weight of up to 600 kg. It operates at a maximum temperature of 1300°C in vacuum with a temperature uniformity of ±6°C. Convection heating is effective up to 750°C at pressures up to 3 bar absolute. The furnace achieves a maximum vacuum range of 10⁻² mbar when clean, empty, and preheated, and up to 5 x 10⁻² mbar when cold.
Equipped with a robust pump system including mechanical vacuum pumps (300 m³/h) and a roots pump (1200 m³/h), the furnace maintains efficient vacuum conditions. The heating system uses graphite heating elements arranged circumferentially around the charge, powered by 150 kW of heating elements controlled via a thyristor electric controller.
The gas heating and cooling system ensures 360-degree gas distribution within the heating chamber. Control and measurement equipment include Type S thermocouples, piezoelectric pressure sensors, Pfeiffer PTR-280 vacuum heads, and a logic controller with a 15” PP520 B&R panel. Safety and operational controls are managed by a UDC-1200 safety regulator and a PP520 B&R programmer with an Automation Studio operator panel.
Additional features include a blower motor rated at 160 kW with speed regulation and frequency converters, a cooling system pump (80 m³/h), and an emergency pump (10 m³/h). The furnace is suitable for heat treatment in active atmospheres such as carburizing and carbonitriding.
The equipment is housed in a cylindrical chamber supported by orange structural supports and is accompanied by a white rectangular box with piping on top, a cylindrical extension with multiple bolts at the front, and an orange control cabinet labeled "AMP HEAT TREATMENT TECHNOLOGIES" featuring a display, buttons, multiple switches, and an emergency stop button. A vacuum or air pump unit with motor and connected piping is also included. Safety is enhanced with yellow safety railings surrounding the furnace. The surfaces show minor signs of use, including some scuffs, patches of paint or repair, and dirt marks, but the overall condition appears maintained. The furnace and its components are situated in an industrial warehouse environment with visible pallets, pipes, and cables nearby.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – large company |
| Active since | 2023 |
| Offers online | 1 |
| Last activity | Sept. 15, 2023 |
AMP Quantum G Typu HVF 60/60/100- 12.0IQP
Pec AMP Quantum G Typu HVF 60/60/100- 12.0IQP
AMP Quantum G Typu HVF 60/60/100- 12.0IQP
AMP Quantum G Typu HVF 60/60/100- 12.0IQP Schmelzofen
AMP Quantum G Typu HVF 60/60/100- 12.0IQP
AMP Quantum G Typu HVF 60/60/100- 12.0IQP Furnace
Horno por inducción AMP Quantum G Typu HVF 60/60/100- 12.0IQP
Four AMP Quantum G Typu HVF 60/60/100- 12.0IQP
AMP Quantum G Typu HVF 60/60/100- 12.0IQP
AMP Quantum G Typu HVF 60/60/100- 12.0IQP
Fornace AMP Quantum G Typu HVF 60/60/100- 12.0IQP
AMP Quantum G Typu HVF 60/60/100- 12.0IQP
AMP Quantum G Typu HVF 60/60/100- 12.0IQP
Piec AMP Quantum G Typu HVF 60/60/100- 12.0IQP
Forno AMP Quantum G Typu HVF 60/60/100- 12.0IQP
AMP Quantum G Typu HVF 60/60/100- 12.0IQP
AMP Quantum G Typu HVF 60/60/100- 12.0IQP Печь
AMP Quantum G Typu HVF 60/60/100- 12.0IQP
AMP Quantum G Typu HVF 60/60/100- 12.0IQP
Fırın AMP Quantum G Typu HVF 60/60/100- 12.0IQP
EN
- Languages
English (GB)