The AMADA VIPROS 358 KING turret press, built in 1999 in Japan, is used to punch holes in sheets made of ordinary steel, stainless steel and aluminum. Details with a maximum length of 1250 mm, a width of 3000 mm and a weight of 50 kg, are processed with a force of 30 tons on the brush table of the machine, protecting the sheet surface against various scratches and scratches.

Two hydraulic clamps are installed on the work table to hold the sheet properly during the entire punching process. In one minute, the turret press performs a maximum of 1,200 strokes per minute. The sheet metal punching machine is equipped with 58 tool stations (including 4 indexing stations), the FANUC AC Servo X and Y axis drive and the FANUC Series 18-P CNC controller, which allows you to control all the functions of the machine.

Throughout its lifetime, the AMADA VIPROS 358K punching machine was regularly serviced. The total weight of the machine is 16,000 kg.

Technical specification of the AMADA VIPROS 358 KING punching machine

- pressure force: 30 t (294 KN)
- punched details: ordinary steel, stainless steel, aluminum
- maximum sheet length: 1250 mm
- maximum sheet width: 3000 mm
- maximum sheet thickness (mild steel): 3.2 mm
- maximum workpiece weight: 50 kg
- number of tool stations: 58 - including:
Station A: 24
Station B: 26 (including 2 indexed)
Station C: 4
Station D: 2
Station E: 2 (including 2 indexed)
- maximum number of strokes: 1200 / min
- minimum bore diameter: 12 mm
- maximum hole diameter: 114 mm
- feeds in the X / Y axes: 1270/4000 mm
- accelerated feeds in the X and Y axes: 113 m / min
- revolver speed: 30 rpm
- punching accuracy: ± 0.01 mm
- man-hours: 83 995 h
- stroke counter: 44 222 800
- total power requirement: 28 kVA
- dimensions (length x width x height): 4580 x 4120 x 2450 mm
- weight of the machine VIPROS 358 KING: 16,000 kg

AMADA VIPROS 358 KING turret press equipment

- CNC control: FANUC Series 18-P
- X, Y axis drive: FANUC AC Servo
- brush table
- hydraulic sheet clamps: 2 pcs.
- central lubrication

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Power in tons 30 T
Metal length 1250 mm
CNC type FANUC Series 18-P
Metal width 3000 mm
Max steel thickness 3.2 mm
Max. Weight of the workpiece 50 kg
Number of tools 58
-------------------
Length x width x height 4580.0 × 4120.0 × 2450.0
Weight 16000 kg
Worked hours 83995 hours
Hours under power
State good
At local norms ---------
Status
Client type Reseller
Active since 2010
Offers online 377
Last activity March 29, 2024

Description

The AMADA VIPROS 358 KING turret press, built in 1999 in Japan, is used to punch holes in sheets made of ordinary steel, stainless steel and aluminum. Details with a maximum length of 1250 mm, a width of 3000 mm and a weight of 50 kg, are processed with a force of 30 tons on the brush table of the machine, protecting the sheet surface against various scratches and scratches.

Two hydraulic clamps are installed on the work table to hold the sheet properly during the entire punching process. In one minute, the turret press performs a maximum of 1,200 strokes per minute. The sheet metal punching machine is equipped with 58 tool stations (including 4 indexing stations), the FANUC AC Servo X and Y axis drive and the FANUC Series 18-P CNC controller, which allows you to control all the functions of the machine.

Throughout its lifetime, the AMADA VIPROS 358K punching machine was regularly serviced. The total weight of the machine is 16,000 kg.

Technical specification of the AMADA VIPROS 358 KING punching machine

- pressure force: 30 t (294 KN)
- punched details: ordinary steel, stainless steel, aluminum
- maximum sheet length: 1250 mm
- maximum sheet width: 3000 mm
- maximum sheet thickness (mild steel): 3.2 mm
- maximum workpiece weight: 50 kg
- number of tool stations: 58 - including:
Station A: 24
Station B: 26 (including 2 indexed)
Station C: 4
Station D: 2
Station E: 2 (including 2 indexed)
- maximum number of strokes: 1200 / min
- minimum bore diameter: 12 mm
- maximum hole diameter: 114 mm
- feeds in the X / Y axes: 1270/4000 mm
- accelerated feeds in the X and Y axes: 113 m / min
- revolver speed: 30 rpm
- punching accuracy: ± 0.01 mm
- man-hours: 83 995 h
- stroke counter: 44 222 800
- total power requirement: 28 kVA
- dimensions (length x width x height): 4580 x 4120 x 2450 mm
- weight of the machine VIPROS 358 KING: 16,000 kg

AMADA VIPROS 358 KING turret press equipment

- CNC control: FANUC Series 18-P
- X, Y axis drive: FANUC AC Servo
- brush table
- hydraulic sheet clamps: 2 pcs.
- central lubrication

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Power in tons 30 T
Metal length 1250 mm
CNC type FANUC Series 18-P
Metal width 3000 mm
Max steel thickness 3.2 mm
Max. Weight of the workpiece 50 kg
Number of tools 58
-------------------
Length x width x height 4580.0 × 4120.0 × 2450.0
Weight 16000 kg
Worked hours 83995 hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2010
Offers online 377
Last activity March 29, 2024

Here is a selection of similar machines

Amada Vipros 358 King CNC punching machine