Price on request
Make an offer| Power in tons | 170 T |
| Table width | 180 mm |
| Ram stroke | 200 mm |
| Distance between columns | 2700 mm |
| ------------------- | |
| Length x width x height | 4025.0 × 2020.0 × 2900.0 |
| Weight | 11910 kg |
| worked hours | |
| hours under power | 29400 hours |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Amada HFE 170-3 |
| Last availability date | 07/04/2026 |
This listing is for an AMADA HFE 170-3 electro-hydraulic CNC press brake, manufactured in 2000. The machine features a pressing capacity of 170 tons and is designed with a robust frame measuring 4025 mm in length, 2020 mm in width, and 2900 mm in height, weighing approximately 11,910 kg. The press brake includes a table width of 180 mm and a ram stroke of 200 mm, with a distance between columns of 2700 mm.
The CNC control system, AMADA's "OPERATEUR 2," manages six axes (X, Y1 + Y2, R, Z1 + Z2) for precise bending operations. It offers swiveling operation from the front left, a tool and program library, and CNC-controlled back stop adjustment with a range up to 700 mm. Vertical adjustment of the stop fingers (R-axis) is CNC-controlled with a 250 mm range, and lateral adjustments (Z1 + Z2) allow fine tuning. A hand control unit is included for manual axis movements.
The machine is equipped with AMADA's manual upper tool clamping system, divided upper tools (Rehfuß), and a lower tool holder with one V die (not complete). A digital angle measuring system, AMADA DIGI PRO, is integrated to ensure accurate bending angles. Safety features include side and rear protective swinging doors and an emergency off button located at the front.
Operational speeds are 100 mm/sec for adjustment and return, with a working feed speed of 10 mm/sec. The machine requires a total power of 16.5 kW and uses an oil volume of 235 liters at 300 bar pressure.
The press brake has approximately 29,400 operating hours. Visual inspection shows some wear and paint peeling on the front upper red panel, while metal surfaces in the pressing area appear clean and well-maintained without visible rust. The control panel with screen and buttons is mounted on the left side, and multiple clamps or holders are present along the front lower section for press operation. A foot pedal control is positioned on the floor in front of the machine for convenient operation.
This AMADA HFE 170-3 is a heavy-duty CNC press brake suitable for precise and versatile metal bending tasks in industrial settings.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Technical specifications
pressure:
170 t
chamfer lenght:
3170 mm
distance between columns:
2700 mm
column arm:
420 mm
dayligth:
470 mm
stroke:
200 mm
ajustment speed:
100 mm/sec
working feed:
10.0 mm/sec
return speed:
100 mm/sec
table width:
180 mm
table height:
960 mm
oil volume:
235 L
0:
300 bar
controlled axis:
6 Anzahl
Number of working hours:
29.400 h
total power requirement:
16.5 KW
weight of the machine ca.:
11910 kg
range L-W-H:
4025 x 2020 x 2900 mm
Description
** well-maintained condition (!!)
** with only approx. 29.400 operating hours
- in checked condition - machine video -
https://www.youtube.com/watch?v=APP0HZjMms4
Equipment:
- electro-hydraulic CNC press brake
- AMADA CNC control "OPERATEUR 2" - 6 axes (X, Y1 + Y2, R, Z1 + Z2)
* swiveling operation - front left
* tool & program library
- CNC-controlled back stop adjustment (X-axis)
* adjustment range .. 700 mm
- CNC-controlled vertical adjustment of the stop fingers (R-axis)
* adjustment range .. 250 mm
- CNC-controlled adjustment of the stop fingers left-right (Z1 + Z2)
- hand control unit for manual movement of the axes
- AMADA manual upper tool clamping system
- AMADA Rehfuß upper tools - divided
- AMADA Lower tool holder - incl. 1x V die (not complete)
- AMADA DIGI PRO - gigital angle measuring system
- 1x freely movable double foot switch
- side protective device (swinging doors)
- rear protective device (swinging door)
- EMERGENCY OFF button at the front
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2012 |
| Offers online | 16 |
| Last activity | April 19, 2026 |
Technical specifications
pressure:
170 t
chamfer lenght:
3170 mm
distance between columns:
2700 mm
column arm:
420 mm
dayligth:
470 mm
stroke:
200 mm
ajustment speed:
100 mm/sec
working feed:
10.0 mm/sec
return speed:
100 mm/sec
table width:
180 mm
table height:
960 mm
oil volume:
235 L
0:
300 bar
controlled axis:
6 Anzahl
Number of working hours:
29.400 h
total power requirement:
16.5 KW
weight of the machine ca.:
11910 kg
range L-W-H:
4025 x 2020 x 2900 mm
Description
** well-maintained condition (!!)
** with only approx. 29.400 operating hours
- in checked condition - machine video -
https://www.youtube.com/watch?v=APP0HZjMms4
Equipment:
- electro-hydraulic CNC press brake
- AMADA CNC control "OPERATEUR 2" - 6 axes (X, Y1 + Y2, R, Z1 + Z2)
* swiveling operation - front left
* tool & program library
- CNC-controlled back stop adjustment (X-axis)
* adjustment range .. 700 mm
- CNC-controlled vertical adjustment of the stop fingers (R-axis)
* adjustment range .. 250 mm
- CNC-controlled adjustment of the stop fingers left-right (Z1 + Z2)
- hand control unit for manual movement of the axes
- AMADA manual upper tool clamping system
- AMADA Rehfuß upper tools - divided
- AMADA Lower tool holder - incl. 1x V die (not complete)
- AMADA DIGI PRO - gigital angle measuring system
- 1x freely movable double foot switch
- side protective device (swinging doors)
- rear protective device (swinging door)
- EMERGENCY OFF button at the front
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Power in tons | 170 T |
| Table width | 180 mm |
| Ram stroke | 200 mm |
| Distance between columns | 2700 mm |
| ------------------- | |
| Length x width x height | 4025.0 × 2020.0 × 2900.0 |
| Weight | 11910 kg |
| worked hours | |
| hours under power | 29400 hours |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Amada HFE 170-3 |
| Last availability date | 07/04/2026 |
This listing is for an AMADA HFE 170-3 electro-hydraulic CNC press brake, manufactured in 2000. The machine features a pressing capacity of 170 tons and is designed with a robust frame measuring 4025 mm in length, 2020 mm in width, and 2900 mm in height, weighing approximately 11,910 kg. The press brake includes a table width of 180 mm and a ram stroke of 200 mm, with a distance between columns of 2700 mm.
The CNC control system, AMADA's "OPERATEUR 2," manages six axes (X, Y1 + Y2, R, Z1 + Z2) for precise bending operations. It offers swiveling operation from the front left, a tool and program library, and CNC-controlled back stop adjustment with a range up to 700 mm. Vertical adjustment of the stop fingers (R-axis) is CNC-controlled with a 250 mm range, and lateral adjustments (Z1 + Z2) allow fine tuning. A hand control unit is included for manual axis movements.
The machine is equipped with AMADA's manual upper tool clamping system, divided upper tools (Rehfuß), and a lower tool holder with one V die (not complete). A digital angle measuring system, AMADA DIGI PRO, is integrated to ensure accurate bending angles. Safety features include side and rear protective swinging doors and an emergency off button located at the front.
Operational speeds are 100 mm/sec for adjustment and return, with a working feed speed of 10 mm/sec. The machine requires a total power of 16.5 kW and uses an oil volume of 235 liters at 300 bar pressure.
The press brake has approximately 29,400 operating hours. Visual inspection shows some wear and paint peeling on the front upper red panel, while metal surfaces in the pressing area appear clean and well-maintained without visible rust. The control panel with screen and buttons is mounted on the left side, and multiple clamps or holders are present along the front lower section for press operation. A foot pedal control is positioned on the floor in front of the machine for convenient operation.
This AMADA HFE 170-3 is a heavy-duty CNC press brake suitable for precise and versatile metal bending tasks in industrial settings.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2012 |
| Offers online | 16 |
| Last activity | April 19, 2026 |
Хидравлична преса AMADA HFE 170-3
Hydraulický lis AMADA HFE 170-3
AMADA HFE 170-3 Hydraulisk presse
AMADA HFE 170-3 Hydraulikpresse
Υδραυλική πίεση AMADA HFE 170-3
AMADA HFE 170-3 Hydraulic press
Prensa hidráulica AMADA HFE 170-3
Presse hydraulique AMADA HFE 170-3
Hidraulična preša AMADA HFE 170-3
AMADA HFE 170-3 Hidraulikus nyomás
Pressa idraulica AMADA HFE 170-3
Hidraulinis presas AMADA HFE 170-3
AMADA HFE 170-3 Hydraulische pers
Prasa hydrauliczna AMADA HFE 170-3
Pressão hidráulica AMADA HFE 170-3
Presa hidraulica AMADA HFE 170-3
AMADA HFE 170-3 Гидравлический пресс
Hidraulična presa AMADA HFE 170-3
AMADA HFE 170-3 Hydraulisk press
Hidrolik Pres AMADA HFE 170-3
EN
- Languages
English (GB)