Price on request
Make an offer| Cutting length | 2040 mm |
| Max. thickness | 4 mm |
| Max cutting angle | 2 ° |
| Min cutting angle | 1 ° |
| Back gauge type | Motorised Backgauge |
| Backgauge adjustment | 1000 mm |
| ------------------- | |
| Length x width x height | 2550.0 × 2100.0 × 1700.0 |
| Weight | 3300 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Amada GPS 420 |
| Last availability date | 02/06/2026 |
This listing features an AMADA GPS 420 hydraulic guillotine shear designed for precise sheet metal cutting. The machine has a cutting length of 2040 mm and can handle sheet thicknesses up to 4.0 mm, with a reduced capacity of 3.0 mm for stainless steel. It is equipped with a motorized back gauge featuring a backlash-free ball screw, allowing for adjustable positioning at a speed of 100 mm per second, enhancing cutting accuracy and efficiency.
The guillotine shear operates with an electro-hydraulic system powered by a 5.5 kW motor and can achieve a stroke rate between 33 and 55 strokes per minute under a maximum pressure of 250 bar. The cutting angle is set at 1° 20', and the machine includes manual cutting gap adjustment via two levers for fine-tuning.
The rigid welded construction of the machine body ensures stability during operation. Safety features include a front finger guard and a rear sheet metal chute for efficient material handling. The machine is also fitted with nine hold-down clamps to secure the material firmly during cutting.
Additional features include a sighting device with three mirrors for precise cutting after scribing, one long side stop, and one support arm to assist with material positioning. The table height is 855 mm with a depth of 500 mm, providing ergonomic working conditions.
The control panel, located on the front left side, includes buttons and a display for operating the AMADA NC control unit. The machine also has metal support arms extending from the front to support the material during processing. A freely movable foot switch is included for convenient operation.
The machine dimensions are approximately 2550 mm in length, 2100 mm in width, and 1700 mm in height, with a total weight of around 3300 kg. The machine appears clean and well-maintained with only minor surface marks, indicating careful usage and upkeep. Operating instructions are provided in PDF format.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Equipment:
- powerful electro-hydraulic guillotine shears
- AMADA NC control unit
* swivel operation, front left
- NC electro-motorized material backgauge
* backlash-free ball screw
- Manual cutting gap adjustment with 2x levers
- 1x long side stop
- 1x support arm
- Machine body in rigid welded construction
- Sighting device with three mirrors (cutting after scribing)
- Front guard (finger guard)
- Rear sheet metal chute
- 1x freely movable foot switch
- Operating instructions (PDF)
Sheet metal width:
2040 mm
Sheet thickness:
4.0 mm
Sheet thickness for stainless steel:
3.0 mm
Number of hold-down clamps:
9.0 pcs.
Back gauge - adjustable:
100 mm/sec
Cutting angle:
1° 20
Table height:
855 mm
Table depth:
500 mm
Stroke rate:
33 - 55 strokes/min
Pressure
max. 250 bar
Motor power:
5.5 kW
Machine weight approx:
3300 kg.
Dimension L-W-H:
2550 x 2100 x 1700 mm
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2012 |
| Offers online | 16 |
| Last activity | June 11, 2026 |
Equipment:
- powerful electro-hydraulic guillotine shears
- AMADA NC control unit
* swivel operation, front left
- NC electro-motorized material backgauge
* backlash-free ball screw
- Manual cutting gap adjustment with 2x levers
- 1x long side stop
- 1x support arm
- Machine body in rigid welded construction
- Sighting device with three mirrors (cutting after scribing)
- Front guard (finger guard)
- Rear sheet metal chute
- 1x freely movable foot switch
- Operating instructions (PDF)
Sheet metal width:
2040 mm
Sheet thickness:
4.0 mm
Sheet thickness for stainless steel:
3.0 mm
Number of hold-down clamps:
9.0 pcs.
Back gauge - adjustable:
100 mm/sec
Cutting angle:
1° 20
Table height:
855 mm
Table depth:
500 mm
Stroke rate:
33 - 55 strokes/min
Pressure
max. 250 bar
Motor power:
5.5 kW
Machine weight approx:
3300 kg.
Dimension L-W-H:
2550 x 2100 x 1700 mm
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Cutting length | 2040 mm |
| Max. thickness | 4 mm |
| Max cutting angle | 2 ° |
| Min cutting angle | 1 ° |
| Back gauge type | Motorised Backgauge |
| Backgauge adjustment | 1000 mm |
| ------------------- | |
| Length x width x height | 2550.0 × 2100.0 × 1700.0 |
| Weight | 3300 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Amada GPS 420 |
| Last availability date | 02/06/2026 |
This listing features an AMADA GPS 420 hydraulic guillotine shear designed for precise sheet metal cutting. The machine has a cutting length of 2040 mm and can handle sheet thicknesses up to 4.0 mm, with a reduced capacity of 3.0 mm for stainless steel. It is equipped with a motorized back gauge featuring a backlash-free ball screw, allowing for adjustable positioning at a speed of 100 mm per second, enhancing cutting accuracy and efficiency.
The guillotine shear operates with an electro-hydraulic system powered by a 5.5 kW motor and can achieve a stroke rate between 33 and 55 strokes per minute under a maximum pressure of 250 bar. The cutting angle is set at 1° 20', and the machine includes manual cutting gap adjustment via two levers for fine-tuning.
The rigid welded construction of the machine body ensures stability during operation. Safety features include a front finger guard and a rear sheet metal chute for efficient material handling. The machine is also fitted with nine hold-down clamps to secure the material firmly during cutting.
Additional features include a sighting device with three mirrors for precise cutting after scribing, one long side stop, and one support arm to assist with material positioning. The table height is 855 mm with a depth of 500 mm, providing ergonomic working conditions.
The control panel, located on the front left side, includes buttons and a display for operating the AMADA NC control unit. The machine also has metal support arms extending from the front to support the material during processing. A freely movable foot switch is included for convenient operation.
The machine dimensions are approximately 2550 mm in length, 2100 mm in width, and 1700 mm in height, with a total weight of around 3300 kg. The machine appears clean and well-maintained with only minor surface marks, indicating careful usage and upkeep. Operating instructions are provided in PDF format.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2012 |
| Offers online | 16 |
| Last activity | June 11, 2026 |
хидравлична ножица AMADA GPS 420
Hydraulické nůžky / gilotiny AMADA GPS 420
AMADA GPS 420 hydraulisk saks
AMADA GPS 420 Hydraulische Blechschere
υδραυλική διάτμηση AMADA GPS 420
AMADA GPS 420 hydraulic shear
Cizalla guillotina hidráulica AMADA GPS 420
Cisaille guillotine hydraulique AMADA GPS 420
hidrauličke škare AMADA GPS 420
AMADA GPS 420 hidraulikus nyíró
Cesoia ghigliottina idraulica AMADA GPS 420
hidraulinis kirpimas AMADA GPS 420
AMADA GPS 420 hydraulische schaar
Nożyce gilotynowe hydrauliczne AMADA GPS 420
tesoura hidráulica AMADA GPS 420
forfecare hidraulica AMADA GPS 420
AMADA GPS 420 Гидравлические гильотинные ножницы
hidraulične makaze AMADA GPS 420
AMADA GPS 420 hydraulisk sax
Hidrolik giyotin makas AMADA GPS 420
EN
- Languages
English (GB)