Price on request
View price| Fuel | other |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | under power |
| Last availability date | 12/03/2026 |
The AMA dto 200 is an industrial diesel tank designed primarily for the storage and supply of fuel to generating sets and heating systems. Manufactured in 2022, this model features a double-wall construction with a geometric capacity of approximately 19,400 liters. The tank is constructed from S235JR steel, with external surfaces painted in Reseda Green (RAL 6011) and internal surfaces left raw. It has a diameter ranging from 2,270 to 2,300 mm, a planking length of approximately 4,500 mm, and a total length of about 5,040 mm. The bottom and planking thicknesses are 6+4 mm, ensuring robust structural integrity.
Key components include a heavy-duty hatch with a 600 mm diameter passage and a 745 mm flange, equipped with an NBR gasket and standard external fittings and bolts. The tank is supported by two saddles reinforced with bands and fixing eyebolts, along with three lifting eyebolts on the plating and additional fixing eyebolts on the bottom. It also features a plate holder bracket, two ¾” sleeves for interspace monitoring, and a vacuum pump support bracket.
For operational safety and monitoring, the tank comes with a 90% load relief valve, a mechanical level indicator, and a EUROVAC vacuum leak detection unit. The manhole includes fittings for generating set connections with suction and return pipes (1" connections), which require extension by the user. Bottom loading is facilitated by a 90% shut-off valve. Additionally, a containment basin sized to 25% of the tank's geometric capacity is included, along with a protective canopy designed for the 20,000-liter tank.
Visually, the tank is a large green cylindrical vessel mounted horizontally on a metal base frame. It is connected to metal piping with valves and fittings, and an electronic control unit with cables and connectors is mounted on the front side. The tank and its components appear clean and well-maintained, with no visible damage or rust. A protective metal roof structure is installed above the tank, providing additional protection from environmental elements.
This comprehensive configuration makes the AMA dto 200 a reliable solution for industrial fuel storage and supply. Prospective buyers are advised to verify all details during an on-site visit to ensure the equipment meets their operational requirements.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Supply of Diesel Tanks built by AMA, - DOUBLE WALL for Generating Sets /
Heating from Lt. 20,000
-Diesel Tank mod. DTO 200 - Double Wall lt. 19.400, built with the
following characteristics:
- Diameter :2.300-2.270 mm
- Planking length :4.500 mm~
- Bottom thickness: 6+4 mm
- Planking :6+4 mm
- Total length Tank :5.040 mm ~
- Material :S235JR
- External finish: Painted.
- Internal finish: Raw
DOUBLE wall tank with a geometric capacity of 19,400 litres.
The tank will be equipped with:
- Nr. 1 heavy hatch Ø passage 600, Ø flange 745 mm, gasket
NBR, standard external fittings and bolts
- Nr. 2 support saddles complete with reinforcement band and fixing eyebolts
- Nr. 3 lifting eyebolts on plating
- Nr. 2 fixing eyebolts on bottoms
- Nr. 1 plate holder bracket
- Nr. 2 ¾” sleeves for interspace monitoring
- Nr. 1 vacuum pump support bracket
The tank will be used for the storage and supply of Generating Sets
and will be accompanied by:
- 90% load relief valve
- Mechanical level indicator
- Vacuum leak detection unit, EUROVAC model
Fittings on the manhole for G.E. connections with suction pipes
and return, internal, to be extended (At your care). Connections: 1".
- Bottom loading for tank complete with 90% shut-off valve.
no. 1 CONTAINMENT BASIN AT 25% OF THE CAP. GEOMETRIC OF
RESERVOIR
RESEDA GREEN PAINT RAL 6011 -
no. 1 CANOPY FOR TF20 FOR 20000 LITERS TANK
this extra information is standard for this model. Please always double-check the details during a visit
I'm sorry, but as of my last knowledge update in January 2022, I don't have information on a specific model of an industrial machine named "AMA dto 200" introduced in 2022. It's possible that this is a new product or a model that was released after my last update.
To provide accurate and up-to-date technical information, I recommend checking the official documentation, specifications, or contacting the manufacturer directly for details on the AMA dto 200 Industrial Boiler from 2022. Manufacturers typically provide comprehensive technical information, features, and specifications for their industrial machines.
If you have any specific details or specifications you'd like included in a technical text, please provide them, and I'll do my best to assist you in crafting a suitable technical description.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| ama-dto-200-p230118091_3.pdf | Download |
| Client type | Machinery dealer |
| Active since | 2017 |
| Offers online | 10 |
| Last activity | May 5, 2026 |
Supply of Diesel Tanks built by AMA, - DOUBLE WALL for Generating Sets /
Heating from Lt. 20,000
-Diesel Tank mod. DTO 200 - Double Wall lt. 19.400, built with the
following characteristics:
- Diameter :2.300-2.270 mm
- Planking length :4.500 mm~
- Bottom thickness: 6+4 mm
- Planking :6+4 mm
- Total length Tank :5.040 mm ~
- Material :S235JR
- External finish: Painted.
- Internal finish: Raw
DOUBLE wall tank with a geometric capacity of 19,400 litres.
The tank will be equipped with:
- Nr. 1 heavy hatch Ø passage 600, Ø flange 745 mm, gasket
NBR, standard external fittings and bolts
- Nr. 2 support saddles complete with reinforcement band and fixing eyebolts
- Nr. 3 lifting eyebolts on plating
- Nr. 2 fixing eyebolts on bottoms
- Nr. 1 plate holder bracket
- Nr. 2 ¾” sleeves for interspace monitoring
- Nr. 1 vacuum pump support bracket
The tank will be used for the storage and supply of Generating Sets
and will be accompanied by:
- 90% load relief valve
- Mechanical level indicator
- Vacuum leak detection unit, EUROVAC model
Fittings on the manhole for G.E. connections with suction pipes
and return, internal, to be extended (At your care). Connections: 1".
- Bottom loading for tank complete with 90% shut-off valve.
no. 1 CONTAINMENT BASIN AT 25% OF THE CAP. GEOMETRIC OF
RESERVOIR
RESEDA GREEN PAINT RAL 6011 -
no. 1 CANOPY FOR TF20 FOR 20000 LITERS TANK
this extra information is standard for this model. Please always double-check the details during a visit
I'm sorry, but as of my last knowledge update in January 2022, I don't have information on a specific model of an industrial machine named "AMA dto 200" introduced in 2022. It's possible that this is a new product or a model that was released after my last update.
To provide accurate and up-to-date technical information, I recommend checking the official documentation, specifications, or contacting the manufacturer directly for details on the AMA dto 200 Industrial Boiler from 2022. Manufacturers typically provide comprehensive technical information, features, and specifications for their industrial machines.
If you have any specific details or specifications you'd like included in a technical text, please provide them, and I'll do my best to assist you in crafting a suitable technical description.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Fuel | other |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | under power |
| Last availability date | 12/03/2026 |
The AMA dto 200 is an industrial diesel tank designed primarily for the storage and supply of fuel to generating sets and heating systems. Manufactured in 2022, this model features a double-wall construction with a geometric capacity of approximately 19,400 liters. The tank is constructed from S235JR steel, with external surfaces painted in Reseda Green (RAL 6011) and internal surfaces left raw. It has a diameter ranging from 2,270 to 2,300 mm, a planking length of approximately 4,500 mm, and a total length of about 5,040 mm. The bottom and planking thicknesses are 6+4 mm, ensuring robust structural integrity.
Key components include a heavy-duty hatch with a 600 mm diameter passage and a 745 mm flange, equipped with an NBR gasket and standard external fittings and bolts. The tank is supported by two saddles reinforced with bands and fixing eyebolts, along with three lifting eyebolts on the plating and additional fixing eyebolts on the bottom. It also features a plate holder bracket, two ¾” sleeves for interspace monitoring, and a vacuum pump support bracket.
For operational safety and monitoring, the tank comes with a 90% load relief valve, a mechanical level indicator, and a EUROVAC vacuum leak detection unit. The manhole includes fittings for generating set connections with suction and return pipes (1" connections), which require extension by the user. Bottom loading is facilitated by a 90% shut-off valve. Additionally, a containment basin sized to 25% of the tank's geometric capacity is included, along with a protective canopy designed for the 20,000-liter tank.
Visually, the tank is a large green cylindrical vessel mounted horizontally on a metal base frame. It is connected to metal piping with valves and fittings, and an electronic control unit with cables and connectors is mounted on the front side. The tank and its components appear clean and well-maintained, with no visible damage or rust. A protective metal roof structure is installed above the tank, providing additional protection from environmental elements.
This comprehensive configuration makes the AMA dto 200 a reliable solution for industrial fuel storage and supply. Prospective buyers are advised to verify all details during an on-site visit to ensure the equipment meets their operational requirements.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2017 |
| Offers online | 10 |
| Last activity | May 5, 2026 |
AMA dto 200 Индустриален котел
Průmyslový kotel AMA dto 200
AMA dto 200 Industrikedel
AMA dto 200 Industriekessel
ΑΜΑ dto 200 Βιομηχανικός λέβητας
AMA dto 200 Industrial boiler
AMA dto 200 Caldera industrial
Chaudière industrielle AMA dto 200
AMA dto 200 Industrijski kotao
AMA dto 200 Ipari kazán
AMA dto 200 Caldaia industriale
Pramoninis katilas AMA dto 200
AMA dto 200 Industriële ketel
AMA dto 200 Kocioł przemysłowy
Caldeira industrial AMA dto 200
Cazan industrial AMA dto 200
АМА dto 200 Промышленный котел
AMA dto 200 Industrijski kotao
AMA dto 200 Industripanna
AMA dto 200 Endüstriyel kazan
EN
- Languages
English (GB)