Used knife mill by Alpine model B32 / 40 RO. The mill has an inlet to a grinding chamber with dimensions of 400 mm x 355 mm. The rotor is equipped with three knives and has a diameter of 315 mm x a length of 400 mm. Working rotor speed up to 700 rpm. There are three static knives mounted in the mill chamber. Bottom discharge of regrind through a sieve with a mesh of approx. 12 mm. The rotor is driven by a belt drive with an electric motor. 18.5 kW, 1500 rpm, 400 V, 50 Hz. The mill is equipped with a stainless steel product hopper. The dimensions of the inlet opening: 390 mm x 240 mm. Along with the mill, the set includes two belt feeders. The first one puts the product into the mill. Working width of the tape made of plastic 250 mm, cross dividers every 675 mm. Working length of the conveyor 290 cm. The upper part of the conveyor is insulated. The second conveyor transported the mill grind from under the mill. Working belt width 250 mm, cross dividers every 675 mm. Working length of the tape 200 cm. The mill is also equipped with a dust / bag filter complete with an exhaust fan. The set also includes electrical panels for: the mill, both conveyors and the dust filter, as well as a vibration-absorbing plate. Machine from 1982. Recently it has been working on rubber granulation. Technical documentation available with the machine.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Speed 700 rpm
Diameter 390 mm
Motor Power 18.5 kW
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status
Client type Reseller
Active since 2018
Offers online 114
Last activity March 28, 2024

Description

Used knife mill by Alpine model B32 / 40 RO. The mill has an inlet to a grinding chamber with dimensions of 400 mm x 355 mm. The rotor is equipped with three knives and has a diameter of 315 mm x a length of 400 mm. Working rotor speed up to 700 rpm. There are three static knives mounted in the mill chamber. Bottom discharge of regrind through a sieve with a mesh of approx. 12 mm. The rotor is driven by a belt drive with an electric motor. 18.5 kW, 1500 rpm, 400 V, 50 Hz. The mill is equipped with a stainless steel product hopper. The dimensions of the inlet opening: 390 mm x 240 mm. Along with the mill, the set includes two belt feeders. The first one puts the product into the mill. Working width of the tape made of plastic 250 mm, cross dividers every 675 mm. Working length of the conveyor 290 cm. The upper part of the conveyor is insulated. The second conveyor transported the mill grind from under the mill. Working belt width 250 mm, cross dividers every 675 mm. Working length of the tape 200 cm. The mill is also equipped with a dust / bag filter complete with an exhaust fan. The set also includes electrical panels for: the mill, both conveyors and the dust filter, as well as a vibration-absorbing plate. Machine from 1982. Recently it has been working on rubber granulation. Technical documentation available with the machine.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Speed 700 rpm
Diameter 390 mm
Motor Power 18.5 kW
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2018
Offers online 114
Last activity March 28, 2024

Here is a selection of similar machines

Alpine B32/40 RO Mill