Double column hydraulic press ALPHA TEC -- ALPHATEC type RPS 5000
Year of construction 2006
Pressure force 500 tons.
Distance between columns front and rear 2520 mm
Table surface 2500 x 2500 mm
Ram area 2500 x 2500 mm
Ram stroke 600 mm
Installation height max. 600 mm
Table height above floor approx. 900 mm
Tank capacity approx. 1000 liters
Ram retraction force approx. 22 ton.
Forward speed adjustable 100-800 mm/s
Pressure build-up to 5000 kN approx. 0.7 sec.
Return stroke speed approx. 300 mm/s
Engine power main engine 75 kW
Motor power control pump 2.2 kW
Mains connection 400 volts, 50 Hz
- 8-fold flat guide for the ram
- Hydraulic ram locking at TDC
- Adjacent switch cabinet (200 x 50 cm)
- Electrical control SIEMENS SPS S7-314
- Operation via SIEMENS OP 170-B (5.7")
- 2-hand control panel on the right
- ground level installation
- Table top 2510 x 2530 x 135 mm (approx. 6700kg)
- Central lubrication
- User manual with wiring diagrams
Required space L x W x H 372 x 260 x 460 cm
Space required for horizontal transport L x W x H 460 x 372 x 260 cm
Weight about 50 tons.
The machine was used to straighten glowing steel flanges.
From bankruptcy - in good condition

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Power in tons 500 T
Type H-Frame
Table length 2500 mm
Table width 2500 mm
Ram stroke 600 mm
Distance between columns 2520 mm
Motor power 75 kW
-------------------
Length x width x height 3720.0 × 2600.0 × 4600.0
Weight 50000 kg
Worked hours
Hours under power
State good
At local norms ---------
Status
Client type Reseller
Active since 2011
Offers online 34
Last activity March 28, 2024

Description

Double column hydraulic press ALPHA TEC -- ALPHATEC type RPS 5000
Year of construction 2006
Pressure force 500 tons.
Distance between columns front and rear 2520 mm
Table surface 2500 x 2500 mm
Ram area 2500 x 2500 mm
Ram stroke 600 mm
Installation height max. 600 mm
Table height above floor approx. 900 mm
Tank capacity approx. 1000 liters
Ram retraction force approx. 22 ton.
Forward speed adjustable 100-800 mm/s
Pressure build-up to 5000 kN approx. 0.7 sec.
Return stroke speed approx. 300 mm/s
Engine power main engine 75 kW
Motor power control pump 2.2 kW
Mains connection 400 volts, 50 Hz
- 8-fold flat guide for the ram
- Hydraulic ram locking at TDC
- Adjacent switch cabinet (200 x 50 cm)
- Electrical control SIEMENS SPS S7-314
- Operation via SIEMENS OP 170-B (5.7")
- 2-hand control panel on the right
- ground level installation
- Table top 2510 x 2530 x 135 mm (approx. 6700kg)
- Central lubrication
- User manual with wiring diagrams
Required space L x W x H 372 x 260 x 460 cm
Space required for horizontal transport L x W x H 460 x 372 x 260 cm
Weight about 50 tons.
The machine was used to straighten glowing steel flanges.
From bankruptcy - in good condition

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Power in tons 500 T
Type H-Frame
Table length 2500 mm
Table width 2500 mm
Ram stroke 600 mm
Distance between columns 2520 mm
Motor power 75 kW
-------------------
Length x width x height 3720.0 × 2600.0 × 4600.0
Weight 50000 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2011
Offers online 34
Last activity March 28, 2024

Here is a selection of similar machines

Alpha Tec RPS 5000 Hydraulic press