This DMG MORI M1 Vertical Machining Centre was manufactured in 2022 in Poland. This machine has 3 axes (x = 550 / y = 550 / z = 510) and is configurated as the "plus" version with 10,000 rpm and chip conveyor. In addition, it is equipped with a SIEMENS Sinumerik 828 D control, SK40 tool holder and comes with a DMG optical probe. Due to low spindle hours of 798 it is in a very good condition.

Machine weight: 5600 kg
CNC: SIEMENS Sinumerik 828 D
CNC language customizable: Yes
Number of spindles: 1
Spindle speed range: 10000 rpm
Number of axis: 3
X-Axis Movement: 550 mm
Y-Axis Movement: 550 mm
Z-Axis Movement: 510 mm
Outer length: 850 mm
Outer width: 650 mm
Slots in storage: 24
Type of tool holder: SK40
Chip conveyor: Yes

Rapid feedrates 24m/min
Dmg optical probe
Very good condition, low hoursMain motor power 13/9 kW (40/100%)

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Axis X 550 mm
Axis Y 550 mm
Axis Z 510 mm
Rotary table (4th axis) no
Type of CNC SIEMENS Sinumerik 828 D
Table length 850 mm
Table width 650 mm
Number of tool pockets 24
Spindle taper SK40
Max. spindle speed 10000 rpm
Spindle motor power 13 kW
-------------------
Weight 5600 kg
Worked hours
Hours under power 798 hours
State good
At local norms ---------
Status
Client type Reseller
Active since 2019
Offers online 947
Last activity March 29, 2024

Description

This DMG MORI M1 Vertical Machining Centre was manufactured in 2022 in Poland. This machine has 3 axes (x = 550 / y = 550 / z = 510) and is configurated as the "plus" version with 10,000 rpm and chip conveyor. In addition, it is equipped with a SIEMENS Sinumerik 828 D control, SK40 tool holder and comes with a DMG optical probe. Due to low spindle hours of 798 it is in a very good condition.

Machine weight: 5600 kg
CNC: SIEMENS Sinumerik 828 D
CNC language customizable: Yes
Number of spindles: 1
Spindle speed range: 10000 rpm
Number of axis: 3
X-Axis Movement: 550 mm
Y-Axis Movement: 550 mm
Z-Axis Movement: 510 mm
Outer length: 850 mm
Outer width: 650 mm
Slots in storage: 24
Type of tool holder: SK40
Chip conveyor: Yes

Rapid feedrates 24m/min
Dmg optical probe
Very good condition, low hoursMain motor power 13/9 kW (40/100%)

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Axis X 550 mm
Axis Y 550 mm
Axis Z 510 mm
Rotary table (4th axis) no
Type of CNC SIEMENS Sinumerik 828 D
Table length 850 mm
Table width 650 mm
Number of tool pockets 24
Spindle taper SK40
Max. spindle speed 10000 rpm
Spindle motor power 13 kW
-------------------
Weight 5600 kg
Worked hours
Hours under power 798 hours
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2019
Offers online 947
Last activity March 29, 2024

Here is a selection of similar machines

DMG MORI M1 Machining center - vertical