Price on request
View price| Cutting length | 6100 mm |
| Max. thickness | 6 mm |
| Back gauge type | Motorised Backgauge |
| Backgauge adjustment | 1000 mm |
| ------------------- | |
| Length x width x height | 6680.0 × 2500.0 × 2030.0 |
| Weight | 15 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | yes |
| status | visible |
| Last availability date | 04/06/2026 |
The AJIAL CS-650 is a large hydraulic guillotine shear designed for precise cutting tasks. It offers a cutting length of 6100 mm and can handle materials up to 6 mm in thickness. The machine features a motorised back gauge with an adjustment range of 1000 mm, allowing for accurate positioning during cutting operations. The cutting angle is fixed at 1º 24', and the machine is capable of performing up to 12 cuts per minute.
This shear is powered by a 20 hp motor and operates with a hydraulic pump flow of 68 liters per minute at a pressure of 120 bar. It delivers a total cutting force of 40 tons. The machine is equipped with eight blades, each with a section of 57x20 mm, and includes a pneumatic knife adjustment system. The cutting line is illuminated to enhance visibility during operation.
Additional features include a ball table to support materials, upper and lower knife sets, a measurement indicator panel linked to the motorised stopper, and a stroke counter with reset functionality. The machine also has a knife clearance adjustment device and a cutting length adjustment device to facilitate fine-tuning of the cutting process. The console measures 1200 mm.
The machine's dimensions are approximately 6680 mm in length, 2500 mm in width, and 2030 mm in height, with a weight of around 15,000 kg. The oil tank capacity is 250 liters.
Visible components include a control panel with buttons and switches located on the left side, and a red blade guard situated in the middle section of the machine. Safety warning signs are displayed on the front, indicating the mandatory use of personal protective equipment such as goggles, ear protection, gloves, and boots. The machine shows signs of rust and wear, particularly on the blue base and work surface, which should be considered when evaluating its condition.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Cutting length: 6100 mm
Cutting thickness: 6 mm
Gooseneck: 350 mm
Distance between uprights: 6250 mm
Stroke stop: 1000 mm
Cutting angle: 1º 24' fixed
Cuts per minute: 12
Hydraulic pump flow: 68 l/mm
Pump motor pressure: 120 bar
Motor power: 20 hp
Number of blades: 8
Blade section: 57x20 mm
Number of treaders: 25
Tampers Ø: 70 mm
Total force: 40 Tn
Oil tank capacity: 250 l
Approx. machine weight: 15.000 Kgs
Machine location: 6680x2500x2030 mm
Equipped with:
Ball table: Yes
Knife set: upper and lower
Knife adjustment: pneumatic
Measurement indicator panel: from motorized stopper
Cutting line illumination
Console: 1200 mm
Knife clearance adjustment device: Yes
Cutting length adjustment device: Yes
Stroke counter with reset to 0:
1 set of wrenches and accessories for maintenance
CE regulation: yes
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2008 |
| Offers online | 44 |
| Last activity | June 9, 2026 |
Cutting length: 6100 mm
Cutting thickness: 6 mm
Gooseneck: 350 mm
Distance between uprights: 6250 mm
Stroke stop: 1000 mm
Cutting angle: 1º 24' fixed
Cuts per minute: 12
Hydraulic pump flow: 68 l/mm
Pump motor pressure: 120 bar
Motor power: 20 hp
Number of blades: 8
Blade section: 57x20 mm
Number of treaders: 25
Tampers Ø: 70 mm
Total force: 40 Tn
Oil tank capacity: 250 l
Approx. machine weight: 15.000 Kgs
Machine location: 6680x2500x2030 mm
Equipped with:
Ball table: Yes
Knife set: upper and lower
Knife adjustment: pneumatic
Measurement indicator panel: from motorized stopper
Cutting line illumination
Console: 1200 mm
Knife clearance adjustment device: Yes
Cutting length adjustment device: Yes
Stroke counter with reset to 0:
1 set of wrenches and accessories for maintenance
CE regulation: yes
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Cutting length | 6100 mm |
| Max. thickness | 6 mm |
| Back gauge type | Motorised Backgauge |
| Backgauge adjustment | 1000 mm |
| ------------------- | |
| Length x width x height | 6680.0 × 2500.0 × 2030.0 |
| Weight | 15 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | yes |
| status | visible |
| Last availability date | 04/06/2026 |
The AJIAL CS-650 is a large hydraulic guillotine shear designed for precise cutting tasks. It offers a cutting length of 6100 mm and can handle materials up to 6 mm in thickness. The machine features a motorised back gauge with an adjustment range of 1000 mm, allowing for accurate positioning during cutting operations. The cutting angle is fixed at 1º 24', and the machine is capable of performing up to 12 cuts per minute.
This shear is powered by a 20 hp motor and operates with a hydraulic pump flow of 68 liters per minute at a pressure of 120 bar. It delivers a total cutting force of 40 tons. The machine is equipped with eight blades, each with a section of 57x20 mm, and includes a pneumatic knife adjustment system. The cutting line is illuminated to enhance visibility during operation.
Additional features include a ball table to support materials, upper and lower knife sets, a measurement indicator panel linked to the motorised stopper, and a stroke counter with reset functionality. The machine also has a knife clearance adjustment device and a cutting length adjustment device to facilitate fine-tuning of the cutting process. The console measures 1200 mm.
The machine's dimensions are approximately 6680 mm in length, 2500 mm in width, and 2030 mm in height, with a weight of around 15,000 kg. The oil tank capacity is 250 liters.
Visible components include a control panel with buttons and switches located on the left side, and a red blade guard situated in the middle section of the machine. Safety warning signs are displayed on the front, indicating the mandatory use of personal protective equipment such as goggles, ear protection, gloves, and boots. The machine shows signs of rust and wear, particularly on the blue base and work surface, which should be considered when evaluating its condition.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2008 |
| Offers online | 44 |
| Last activity | June 9, 2026 |
хидравлична ножица AJIAL CS-650
Hydraulické nůžky / gilotiny AJIAL CS-650
AJIAL CS-650 hydraulisk saks
AJIAL CS-650 Hydraulische Blechschere
υδραυλική διάτμηση AJIAL CS-650
AJIAL CS-650 hydraulic shear
Cizalla hidráulica AJIAL CS-650
Cisaille guillotine hydraulique AJIAL CS-650
hidrauličke škare AJIAL CS-650
AJIAL CS-650 hidraulikus nyíró
Cesoia ghigliottina idraulica AJIAL CS-650
hidraulinis kirpimas AJIAL CS-650
AJIAL CS-650 hydraulische schaar
Nożyce gilotynowe hydrauliczne AJIAL CS-650
tesoura hidráulica AJIAL CS-650
forfecare hidraulica AJIAL CS-650
AJIAL CS-650 Гидравлические гильотинные ножницы
hidraulične makaze AJIAL CS-650
AJIAL CS-650 hydraulisk sax
Hidrolik giyotin makas AJIAL CS-650
EN
- Languages
English (GB)