Price on request
Make an offer| Power in tons | 1200 T |
| Ram stroke | 250 mm |
| Nbr of strokes/min | 40 |
| Engine Power | 160 kW |
| ------------------- | |
| Length x width x height | 2450.0 × 1000.0 × 800.0 |
| Weight | 216 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Aida UL1200 |
| Last availability date | 08/04/2026 |
This listing is for an Aida UL1200 Cold Forging Machine, manufactured in 2012. It is a robust industrial cold forging press with a maximum press capacity of 1200 tons. The machine features a ram stroke length of 250 mm and can operate at up to 40 strokes per minute, providing efficient production capabilities. The main motor delivers 160 kW of power, supporting variable speed drive with regenerative control.
The machine's slide dimensions are 2450 mm in length and 1000 mm in width, while the bolster measures 2450 x 1200 mm with a thickness of 250 mm. The bolster surface height from the floor is 800 mm. It is designed to handle a maximum die hanging weight of 4.0 tons. The side opening dimensions are 1050 mm (width) by 510 mm (height).
Control and operation features include a stand-alone control panel located within 30 meters of the machine, an operator console on the front right frame, and a dual-hand operation stand connected by a 3-meter cable. The machine is equipped with multiple digital displays for motor power, press speed, die height (with 0.01 mm resolution), and load measurement, which uses an ALA2 model strain gauge type sensor.
Additional features include an electronic crank angle indicator, electric manual and automatic die height adjustment with 0.1 mm increments, and a forced circulation lubrication system installed in the pit. The hydraulic equipment is also installed in the pit. Safety elements include an emergency stop button of the lock type positioned at various points around the room and at the operator stand.
The machine operates with main motor power supply at AC 400V, 50Hz, and other motors at AC 200V, 50Hz, with control circuit voltages of AC 100V and DC 24V. It requires supply air pressure of 0.5 MPa, boosted to 0.6 MPa, and is suitable for ambient temperatures between 5°C and 40°C.
The machine is housed in a factory setting, appearing clean and well maintained. Safety fencing and yellow guardrails are installed around parts of the machine, and control panels with multiple buttons and screens are located on the right side, enhancing operational safety and control.
Dimensions of the machine are approximately 2450 mm in length, 1000 mm in width, and 800 mm in height, with a total weight of 216 kg as specified.
This Aida UL1200 is a substantial piece of equipment suited for demanding cold forging applications, offering precise control and robust construction.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Offer Title: Aida UL1200 Cold Forging Machine
Manufacturer: Aida
Model: UL1200
Year of Manufacture: 2012
Technical Condition: As-is, where-is
General Equipment Specifications:
Press Capacity: 1200 t
Capability Location: Above dead center, 10 mm
Continuous Operation:
- 15 spm, 71 kJ
- 26 spm, 167 kJ
- 30 spm, 174 kJ
- 40 spm, 181 kJ
Intermittent Operation: 25 spm, 12 cycles, 198 kJ
Stroke Length: 250 mm
Idle Continuous Stroke Rate: 15-40 spm
Intermittent Stroke Rate: 25 spm at 12 spm
Micro-Inching: Approx. 10 spm
Die Height: 750 mm
Slide Adjustment: 100 mm
Slide Dimensions (LxW): 2450 x 1000 mm
Bolster Dimensions (LxW): 2450 x 1200 mm
Bolster Thickness: 250 mm
Bolster Surface Height from Floor: 800 mm
Maximum Die Hanging Weight: 4.0 tons
Side Opening Dimensions (WxH): 1050 x 510 mm
Main Motor: INY 160 kW
Power Supply:
- Main Motor: AC400V, 50Hz
- Other Motors: AC200V, 50Hz
Control Circuit Voltage: AC100V, DC24V
Supply Air Pressure: 0.5 MPa, boosted to 0.6 MPa
Ambient Temperature: 5-40°C
Total Mass Above Floor: 216 tons
Special Equipment Features:
Variable Speed Drive: Main motor with regenerative control
Reversing Installation: Not available for press-down tests
Micro-Inching: Low-speed rotation type for the main motor
Flywheel Brake: Interlinked with the main motor
Crank Angle Indicator: Electronic, within the main control panel
Main Motor Power Meter: Digital display
Press Speed Meter: Digital display
Die Height Meter: Digital display with a resolution of 0.01 mm
Die Height Adjustment: Electric manual via push-button operation, automatic with digital setting at 0.1 mm increments
Load Measurement: Graphic display, ALA2 model strain gauge type (also detects overloads)
Lubrication System: Forced circulation (installed in the pit), automatic intermittent lubrication
Hydraulic Equipment Operation: Installed in the pit
Control Panel: Stand-alone type, within 30 meters
Operator Console: Located at the front right frame
Operator Stand: Dual-hand operation with a 3-meter cable
Receptacle for Operator Stand: Located at the front right frame
Timing Switch: Digital, with four spare circuits
Production Counter: Reset type with a stop function after a set number, 6-digit display
Emergency Stop Button: Lock type, positioned at various points around the room and at the operator stand
Setup Stop Device: Switches between top dead center and 600 mm stroke
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2021 |
| Offers online | 38 |
| Last activity | April 16, 2026 |
Offer Title: Aida UL1200 Cold Forging Machine
Manufacturer: Aida
Model: UL1200
Year of Manufacture: 2012
Technical Condition: As-is, where-is
General Equipment Specifications:
Press Capacity: 1200 t
Capability Location: Above dead center, 10 mm
Continuous Operation:
- 15 spm, 71 kJ
- 26 spm, 167 kJ
- 30 spm, 174 kJ
- 40 spm, 181 kJ
Intermittent Operation: 25 spm, 12 cycles, 198 kJ
Stroke Length: 250 mm
Idle Continuous Stroke Rate: 15-40 spm
Intermittent Stroke Rate: 25 spm at 12 spm
Micro-Inching: Approx. 10 spm
Die Height: 750 mm
Slide Adjustment: 100 mm
Slide Dimensions (LxW): 2450 x 1000 mm
Bolster Dimensions (LxW): 2450 x 1200 mm
Bolster Thickness: 250 mm
Bolster Surface Height from Floor: 800 mm
Maximum Die Hanging Weight: 4.0 tons
Side Opening Dimensions (WxH): 1050 x 510 mm
Main Motor: INY 160 kW
Power Supply:
- Main Motor: AC400V, 50Hz
- Other Motors: AC200V, 50Hz
Control Circuit Voltage: AC100V, DC24V
Supply Air Pressure: 0.5 MPa, boosted to 0.6 MPa
Ambient Temperature: 5-40°C
Total Mass Above Floor: 216 tons
Special Equipment Features:
Variable Speed Drive: Main motor with regenerative control
Reversing Installation: Not available for press-down tests
Micro-Inching: Low-speed rotation type for the main motor
Flywheel Brake: Interlinked with the main motor
Crank Angle Indicator: Electronic, within the main control panel
Main Motor Power Meter: Digital display
Press Speed Meter: Digital display
Die Height Meter: Digital display with a resolution of 0.01 mm
Die Height Adjustment: Electric manual via push-button operation, automatic with digital setting at 0.1 mm increments
Load Measurement: Graphic display, ALA2 model strain gauge type (also detects overloads)
Lubrication System: Forced circulation (installed in the pit), automatic intermittent lubrication
Hydraulic Equipment Operation: Installed in the pit
Control Panel: Stand-alone type, within 30 meters
Operator Console: Located at the front right frame
Operator Stand: Dual-hand operation with a 3-meter cable
Receptacle for Operator Stand: Located at the front right frame
Timing Switch: Digital, with four spare circuits
Production Counter: Reset type with a stop function after a set number, 6-digit display
Emergency Stop Button: Lock type, positioned at various points around the room and at the operator stand
Setup Stop Device: Switches between top dead center and 600 mm stroke
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Power in tons | 1200 T |
| Ram stroke | 250 mm |
| Nbr of strokes/min | 40 |
| Engine Power | 160 kW |
| ------------------- | |
| Length x width x height | 2450.0 × 1000.0 × 800.0 |
| Weight | 216 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Aida UL1200 |
| Last availability date | 08/04/2026 |
This listing is for an Aida UL1200 Cold Forging Machine, manufactured in 2012. It is a robust industrial cold forging press with a maximum press capacity of 1200 tons. The machine features a ram stroke length of 250 mm and can operate at up to 40 strokes per minute, providing efficient production capabilities. The main motor delivers 160 kW of power, supporting variable speed drive with regenerative control.
The machine's slide dimensions are 2450 mm in length and 1000 mm in width, while the bolster measures 2450 x 1200 mm with a thickness of 250 mm. The bolster surface height from the floor is 800 mm. It is designed to handle a maximum die hanging weight of 4.0 tons. The side opening dimensions are 1050 mm (width) by 510 mm (height).
Control and operation features include a stand-alone control panel located within 30 meters of the machine, an operator console on the front right frame, and a dual-hand operation stand connected by a 3-meter cable. The machine is equipped with multiple digital displays for motor power, press speed, die height (with 0.01 mm resolution), and load measurement, which uses an ALA2 model strain gauge type sensor.
Additional features include an electronic crank angle indicator, electric manual and automatic die height adjustment with 0.1 mm increments, and a forced circulation lubrication system installed in the pit. The hydraulic equipment is also installed in the pit. Safety elements include an emergency stop button of the lock type positioned at various points around the room and at the operator stand.
The machine operates with main motor power supply at AC 400V, 50Hz, and other motors at AC 200V, 50Hz, with control circuit voltages of AC 100V and DC 24V. It requires supply air pressure of 0.5 MPa, boosted to 0.6 MPa, and is suitable for ambient temperatures between 5°C and 40°C.
The machine is housed in a factory setting, appearing clean and well maintained. Safety fencing and yellow guardrails are installed around parts of the machine, and control panels with multiple buttons and screens are located on the right side, enhancing operational safety and control.
Dimensions of the machine are approximately 2450 mm in length, 1000 mm in width, and 800 mm in height, with a total weight of 216 kg as specified.
This Aida UL1200 is a substantial piece of equipment suited for demanding cold forging applications, offering precise control and robust construction.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2021 |
| Offers online | 38 |
| Last activity | April 16, 2026 |
Преса за студено обемно щамповане Aida UL1200
Kovací lis za studena Aida UL1200
Aida UL1200 Koldsmedepresse
Aida UL1200 Kaltumformpresse
Πρέσα ψυχρής σφυρηλάτησης Aida UL1200
Aida UL1200 Cold forging machine
Prensa de forja en frío Aida UL1200
Presse de forge à froid Aida UL1200
Preša za hladno kovanje Aida UL1200
Aida UL1200 Hidegalakító prés
Pressa per forgiatura a freddo Aida UL1200
Aida UL1200 Šaltojo tūrinio kalimo presas
Aida UL1200 Koudomvormpers
Prasa do kucia na zimno Aida UL1200
Prensa de forjamento a frio Aida UL1200
Presă de forjare la rece Aida UL1200
Aida UL1200 Пресс для холодной объемной штамповки
Presa za hladno kovanje Aida UL1200
Aida UL1200 Kallsmidespress
Soğuk dövme presi Aida UL1200
EN
- Languages
English (GB)