Price on request
Make an offer| Power in tons | 80 T |
| Ram stroke | 200 mm |
| Nbr of strokes/min | 150 |
| Distance between columns | 450 mm |
| Engine Power | 45 kW |
| ------------------- | |
| Weight | 33000 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Aida PDA-80L |
| Last availability date | 15/04/2026 |
This listing is for two units of the AIDA PDA-8H high-speed mechanical presses, manufactured by AIDA ENGINEERING LTD. These presses have a rated capacity of 80 tons and feature a ram stroke of 200 mm. They can operate at speeds ranging from 60 to 150 strokes per minute. The presses have a bolster area measuring 1400 x 500 mm and a slide area of the same dimensions, with a bolster thickness of 200 mm. The distance between the slide and bolster is 450 mm, and the slide adjustment range is 50 mm. Each press is powered by a 45 kW main motor.
The presses are equipped with control panels located on both the left and right sides, featuring multiple buttons and switches for operational control. Hydraulic or pneumatic components are installed on top of the press, accompanied by safety railings around the working area. The right side of the machine shows visible hydraulic or pneumatic lines and gauges. The press is mounted on a brick base, indicating a permanent installation. A yellow protective frame surrounds the working area, enhancing operator safety.
Additional specifications include required air pressure of 5 kgf/cm² and clutch and brake pressure of 4 kg/cm². The presses have a total weight of approximately 33,000 kg (33 tons). The equipment appears to be in used condition, with some wear and dust visible, and is located in a warehouse or factory environment with various equipment and materials nearby.
Please note that the technical condition is sold as-is, where-is, and no claims about testing or refurbishment are made. The presses are suitable for high-speed pressing operations requiring precise control and robust construction.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
High Speed Press Automat AIDA PDA-8H
Manufacturer: AIDA ENGINEERING LTD.
Quantity: 2 units
Condition: Never used, like new
Specifications:
Press Capacity: 80 tons
Rated Tonnage Point: 6.5 mm
Stroke: 200 mm
Number of Strokes per Minute: 60-150
Bolster Area (L x W): 1400 x 500 mm
Slide Area (L x W): 1400 x 500 mm
Bolster Thickness: 200 mm
Distance Between Slide and Bolster: 450 mm
Slide Adjustment: 50 mm
Main Motor: 45 kW
Required Air Pressure: 5 kgf/cm²
Total Weight: 33 tons
Roll Feed:
Material Width: 70-300 mm
Material Thickness: 0.25-0.4 mm
Feed Length: 50-120 mm
Feed Angle: 30-60 degrees
Uncoiler:
Coil Diameter: 800-1200 mm
Technical Condition: As-is, where-is
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2008 |
| Offers online | 17 |
| Last activity | April 15, 2026 |
High Speed Press Automat AIDA PDA-8H
Manufacturer: AIDA ENGINEERING LTD.
Quantity: 2 units
Condition: Never used, like new
Specifications:
Press Capacity: 80 tons
Rated Tonnage Point: 6.5 mm
Stroke: 200 mm
Number of Strokes per Minute: 60-150
Bolster Area (L x W): 1400 x 500 mm
Slide Area (L x W): 1400 x 500 mm
Bolster Thickness: 200 mm
Distance Between Slide and Bolster: 450 mm
Slide Adjustment: 50 mm
Main Motor: 45 kW
Required Air Pressure: 5 kgf/cm²
Total Weight: 33 tons
Roll Feed:
Material Width: 70-300 mm
Material Thickness: 0.25-0.4 mm
Feed Length: 50-120 mm
Feed Angle: 30-60 degrees
Uncoiler:
Coil Diameter: 800-1200 mm
Technical Condition: As-is, where-is
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Power in tons | 80 T |
| Ram stroke | 200 mm |
| Nbr of strokes/min | 150 |
| Distance between columns | 450 mm |
| Engine Power | 45 kW |
| ------------------- | |
| Weight | 33000 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Aida PDA-80L |
| Last availability date | 15/04/2026 |
This listing is for two units of the AIDA PDA-8H high-speed mechanical presses, manufactured by AIDA ENGINEERING LTD. These presses have a rated capacity of 80 tons and feature a ram stroke of 200 mm. They can operate at speeds ranging from 60 to 150 strokes per minute. The presses have a bolster area measuring 1400 x 500 mm and a slide area of the same dimensions, with a bolster thickness of 200 mm. The distance between the slide and bolster is 450 mm, and the slide adjustment range is 50 mm. Each press is powered by a 45 kW main motor.
The presses are equipped with control panels located on both the left and right sides, featuring multiple buttons and switches for operational control. Hydraulic or pneumatic components are installed on top of the press, accompanied by safety railings around the working area. The right side of the machine shows visible hydraulic or pneumatic lines and gauges. The press is mounted on a brick base, indicating a permanent installation. A yellow protective frame surrounds the working area, enhancing operator safety.
Additional specifications include required air pressure of 5 kgf/cm² and clutch and brake pressure of 4 kg/cm². The presses have a total weight of approximately 33,000 kg (33 tons). The equipment appears to be in used condition, with some wear and dust visible, and is located in a warehouse or factory environment with various equipment and materials nearby.
Please note that the technical condition is sold as-is, where-is, and no claims about testing or refurbishment are made. The presses are suitable for high-speed pressing operations requiring precise control and robust construction.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2008 |
| Offers online | 17 |
| Last activity | April 15, 2026 |
Механична преса AIDA PDA-8H
Mechanický lis AIDA PDA-8H
AIDA PDA-8H Mekanisk presse
AIDA PDA-8H Mechanische Presse
Μηχανική πρέσα AIDA PDA-8H
AIDA PDA-8H Mechanical press
Prensa mecánica AIDA PDA-8H
Presse mécanique AIDA PDA-8H
Mehanička preša AIDA PDA-8H
AIDA PDA-8H Mechanikus prés
Pressa meccanica AIDA PDA-8H
AIDA PDA-8H Mechaninis presas
AIDA PDA-8H Mechanische pers
Prasa mechaniczna AIDA PDA-8H
Prensa mecânica AIDA PDA-8H
Presă mecanică AIDA PDA-8H
AIDA PDA-8H Механический пресс
Mehanička presa AIDA PDA-8H
AIDA PDA-8H Mekanisk press
Mekanik pres AIDA PDA-8H
EN
- Languages
English (GB)