Pressing of large-dimension profiles with the highest quality requirements
Easy setting and operation of the machine, short changeover times due to simple knife changing system
High pressing force reserve by means of large-volume air actuator (maintenance-free)
With lowerable, hydropneumatically controlled abutment
Due to the special design of the abutment head, it is possible to press frames with an inside dimension of 150 mm or more (clear dimension)
Pressing depth can be adjusted separately for each tool slide
Adjustable press knives to compensate for the profile chamber offset
(from -5 to 15 mm as standard, 15 to 35 mm optional) available
Standard with support arms and press knives
2-hand operation
Support table for pre-assembly or storage
Abutment
Special press knives
Pressing height 140 mm
Pressing force 70 kN (7 t)
Pneumatic drive
Electrical connection 230 V, 1~, 50/60 Hz
Compressed air connection 7 bar
Air consumption per cycle 35 l
Length 1,100 mm, depth 950 mm, height 1,230 mm, weight 545 kg

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

-------------------
Length x width x height 1100.0 × 950.0 × 1230.0
Weight 545 kg
Worked hours
Hours under power
State like new
At local norms ---------
Status under power
Client type User – small or medium company
Active since 2022
Offers online 3
Last activity Feb. 16, 2024

Description

Pressing of large-dimension profiles with the highest quality requirements
Easy setting and operation of the machine, short changeover times due to simple knife changing system
High pressing force reserve by means of large-volume air actuator (maintenance-free)
With lowerable, hydropneumatically controlled abutment
Due to the special design of the abutment head, it is possible to press frames with an inside dimension of 150 mm or more (clear dimension)
Pressing depth can be adjusted separately for each tool slide
Adjustable press knives to compensate for the profile chamber offset
(from -5 to 15 mm as standard, 15 to 35 mm optional) available
Standard with support arms and press knives
2-hand operation
Support table for pre-assembly or storage
Abutment
Special press knives
Pressing height 140 mm
Pressing force 70 kN (7 t)
Pneumatic drive
Electrical connection 230 V, 1~, 50/60 Hz
Compressed air connection 7 bar
Air consumption per cycle 35 l
Length 1,100 mm, depth 950 mm, height 1,230 mm, weight 545 kg

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

-------------------
Length x width x height 1100.0 × 950.0 × 1230.0
Weight 545 kg
Worked hours
Hours under power
State like new
At local norms ---------
Status under power

About this seller

Client type User – small or medium company
Active since 2022
Offers online 3
Last activity Feb. 16, 2024

Here is a selection of similar machines

elumatec EP 124 ECKVERBINDUNGSPRESSE Other