Price on request
Make an offer| Power in tons | 200 T |
| Table length | 1560 mm |
| Table width | 1010 mm |
| Ram stroke | 575 mm |
| Engine Power | 22 kW |
| ------------------- | |
| Length x width x height | 3500.0 × 1800.0 × 1200.0 |
| Weight | 13000 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Ageo GHP 200 H6 |
| Last availability date | 15/04/2026 |
This hydraulic synchronous press, manufactured by AGEO in 1993, is the model GHP 200 H6. It offers a pressing force of 200 tons and features a robust structure with a red and white frame supported by four vertical chrome guide columns. The press table measures 1560 mm in length and 1010 mm in width, matching the ram surface dimensions, and the ram stroke is 575 mm. The machine's overall dimensions for horizontal transport are approximately 3500 mm long, 1800 mm wide, and 1200 mm high, with a total weight of 13,000 kg.
The press is equipped with a control panel mounted on an adjustable arm, featuring a screen and multiple buttons, including an emergency stop button for safety. The control system allows continuously variable pressing speeds from 0 to 10 mm/s and return stroke speeds from 0 to 20 mm/s, with precise electronic synchronization of the two pressure cylinders. Additional features include 22 mm T-slots on the table and ram, a mechanical safety hold-up device to prevent the ram from sinking under its own weight, and stroke-independent pressure pre-setting with digital pressure display.
The machine includes a hydraulic die cushion under the press table with an ejector function, and the control panel is pivotable with a joystick for stroke movement and press speed control. The electrical system operates on a 400 Volt, 50 Hz mains connection, powered by a 22 kW main motor and a 5.5 kW control pump.
The press shows minor signs of use on the base and wear on the press table, including chipped paint and surface scratches, but overall appears clean and well-maintained with no visible damage or rust. Safety features such as warning signs and emergency stop buttons are clearly present. This press was previously used as a tool testing press in a tool shop and includes operating instructions with circuit diagrams.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Machine Type: Hydraulic Synchronous Press
Manufacturer: AGEO
Model: GHP 200 H6
Year of Manufacture: 1993
Technical Condition: Very Good
Pressing Force: 200 tons
Front Column Width: 1200 mm
Side Column Passage: 650 mm
Table Surface Dimensions: 1560 x 1010 mm
Ram Surface Dimensions: 1560 x 1010 mm
Ram Stroke: 575 mm
Die Cushion Stroke: 300 mm
Die Cushion Holding Force: 63 tons
Die Cushion Ejector Force: 30 tons
Max Installation Height: 775 mm
Table Height Above Floor: 1000 mm
Guide Columns Diameter: Ø 140 mm
Clamping Pin Bore on Ram: 64 mm
Pressing Speed: 0 to 10 mm/s (continuously variable)
Return Stroke Speed: 0 to 20 mm/s (continuously variable)
Main Motor Power: 22 kW
Control Pump Power: 5.5 kW
Mains Connection: 400 Volt, 50 Hz
Features:
- Table and ram equipped with 22 mm T-slots
- Two pressure cylinders with electronic precision synchronization control
- Continuously variable electrical stroke limitation with digital travel measurement and position display
- Mechanical safety hold-up device to prevent ram from sinking due to its own weight
- One-hand and two-hand operation capabilities
- Electrical tool protection via signal contact
- Stroke-independent pressure pre-setting with digital pressure display
- Travel measuring system on both sides via rotary encoder
- Electrical control via MS-DOS PC with Ageo H v2.23 control software
- Pivotable control panel with screen
- Stroke movement and press speed controlled by joystick
- Adjacent hydraulic unit with electrical cabinet
- Hydraulic die cushion under the press table with ejector function
- Continuous stroke control
- Ground-level installation
- Electrical oil temperature monitoring
- Operating instructions with circuit diagrams
Space Requirements:
- For Upright Press (L x W x H): 1800 x 1010 x 3470 mm
- For Horizontal Transport (L x W x H): 3500 x 1800 x 1200 mm
- For Hydraulic Unit (L x W x H): 1000 x 800 x 3040 mm
Press Weight: 13 tons
Hydraulic Unit Weight: Approx. 1 ton
Usage: The machine was utilized as a tool testing press in a tool shop.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2011 |
| Offers online | 63 |
| Last activity | April 14, 2026 |
Machine Type: Hydraulic Synchronous Press
Manufacturer: AGEO
Model: GHP 200 H6
Year of Manufacture: 1993
Technical Condition: Very Good
Pressing Force: 200 tons
Front Column Width: 1200 mm
Side Column Passage: 650 mm
Table Surface Dimensions: 1560 x 1010 mm
Ram Surface Dimensions: 1560 x 1010 mm
Ram Stroke: 575 mm
Die Cushion Stroke: 300 mm
Die Cushion Holding Force: 63 tons
Die Cushion Ejector Force: 30 tons
Max Installation Height: 775 mm
Table Height Above Floor: 1000 mm
Guide Columns Diameter: Ø 140 mm
Clamping Pin Bore on Ram: 64 mm
Pressing Speed: 0 to 10 mm/s (continuously variable)
Return Stroke Speed: 0 to 20 mm/s (continuously variable)
Main Motor Power: 22 kW
Control Pump Power: 5.5 kW
Mains Connection: 400 Volt, 50 Hz
Features:
- Table and ram equipped with 22 mm T-slots
- Two pressure cylinders with electronic precision synchronization control
- Continuously variable electrical stroke limitation with digital travel measurement and position display
- Mechanical safety hold-up device to prevent ram from sinking due to its own weight
- One-hand and two-hand operation capabilities
- Electrical tool protection via signal contact
- Stroke-independent pressure pre-setting with digital pressure display
- Travel measuring system on both sides via rotary encoder
- Electrical control via MS-DOS PC with Ageo H v2.23 control software
- Pivotable control panel with screen
- Stroke movement and press speed controlled by joystick
- Adjacent hydraulic unit with electrical cabinet
- Hydraulic die cushion under the press table with ejector function
- Continuous stroke control
- Ground-level installation
- Electrical oil temperature monitoring
- Operating instructions with circuit diagrams
Space Requirements:
- For Upright Press (L x W x H): 1800 x 1010 x 3470 mm
- For Horizontal Transport (L x W x H): 3500 x 1800 x 1200 mm
- For Hydraulic Unit (L x W x H): 1000 x 800 x 3040 mm
Press Weight: 13 tons
Hydraulic Unit Weight: Approx. 1 ton
Usage: The machine was utilized as a tool testing press in a tool shop.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Power in tons | 200 T |
| Table length | 1560 mm |
| Table width | 1010 mm |
| Ram stroke | 575 mm |
| Engine Power | 22 kW |
| ------------------- | |
| Length x width x height | 3500.0 × 1800.0 × 1200.0 |
| Weight | 13000 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Ageo GHP 200 H6 |
| Last availability date | 15/04/2026 |
This hydraulic synchronous press, manufactured by AGEO in 1993, is the model GHP 200 H6. It offers a pressing force of 200 tons and features a robust structure with a red and white frame supported by four vertical chrome guide columns. The press table measures 1560 mm in length and 1010 mm in width, matching the ram surface dimensions, and the ram stroke is 575 mm. The machine's overall dimensions for horizontal transport are approximately 3500 mm long, 1800 mm wide, and 1200 mm high, with a total weight of 13,000 kg.
The press is equipped with a control panel mounted on an adjustable arm, featuring a screen and multiple buttons, including an emergency stop button for safety. The control system allows continuously variable pressing speeds from 0 to 10 mm/s and return stroke speeds from 0 to 20 mm/s, with precise electronic synchronization of the two pressure cylinders. Additional features include 22 mm T-slots on the table and ram, a mechanical safety hold-up device to prevent the ram from sinking under its own weight, and stroke-independent pressure pre-setting with digital pressure display.
The machine includes a hydraulic die cushion under the press table with an ejector function, and the control panel is pivotable with a joystick for stroke movement and press speed control. The electrical system operates on a 400 Volt, 50 Hz mains connection, powered by a 22 kW main motor and a 5.5 kW control pump.
The press shows minor signs of use on the base and wear on the press table, including chipped paint and surface scratches, but overall appears clean and well-maintained with no visible damage or rust. Safety features such as warning signs and emergency stop buttons are clearly present. This press was previously used as a tool testing press in a tool shop and includes operating instructions with circuit diagrams.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2011 |
| Offers online | 63 |
| Last activity | April 14, 2026 |
Хидравлична преса AGEO GHP 200 H6
Hydraulický lis AGEO GHP 200 H6
AGEO GHP 200 H6 Hydraulisk presse
AGEO GHP 200 H6 Hydraulikpresse
Υδραυλική πίεση AGEO GHP 200 H6
AGEO GHP 200 H6 Hydraulic press
Prensa hidráulica AGEO GHP 200 H6
Presse hydraulique AGEO GHP 200 H6
Hidraulična preša AGEO GHP 200 H6
AGEO GHP 200 H6 Hidraulikus nyomás
Pressa idraulica AGEO GHP 200 H6
Hidraulinis presas AGEO GHP 200 H6
AGEO GHP 200 H6 Hydraulische pers
Prasa hydrauliczna AGEO GHP 200 H6
Pressão hidráulica AGEO GHP 200 H6
Presa hidraulica AGEO GHP 200 H6
AGEO GHP 200 H6 Гидравлический пресс
Hidraulična presa AGEO GHP 200 H6
AGEO GHP 200 H6 Hydraulisk press
Hidrolik Pres AGEO GHP 200 H6
EN
- Languages
English (GB)